Hedge Trimmers Ama

AMA hedge trimmers are designed for periodic pruning, shaping and finishing of hedges and shrubs. The range includes solutions suitable for domestic garden maintenance and for more intensive work on extensive hedges. AMA was founded in 1967 in San Martino in Rio, in the province of Reggio Emilia, by Luciano Malavolti and Lena Carnevali. From its first premises in a small garage, the company became a group in the 1980s and continued its expansion in the 1990s through acquisitions and new companies. Today, the AMA Group operates through more than 26 companies and 18 production sites, with an international presence and a range dedicated to agriculture, OHV vehicles and green area maintenance. Research and development activities involve in-house teams, universities, research centres and specialised laboratories.

At AgriEuro, the selection of AMA hedge trimmers is divided into the following types:

• AMA battery-powered hedge trimmers: allow you to work without a cable and without preparing a fuel mixture, with immediate start-up and limited routine maintenance. They are suitable for trimming medium-small hedges and shrubs in residential settings;
• AMA petrol hedge trimmers: use an internal combustion engine and offer operating autonomy independent of batteries and electrical outlets. They are suitable for prolonged sessions, extensive hedges and work carried out far from power sources;

At AgriEuro, products can be selected according to their main technical features, making it possible to identify the AMA hedge trimmer best suited to the shape of the hedge, the frequency of use and the expected duration of the work. The parameters must be assessed together, since the power supply, cutting system and weight affect the machine's field of application.

• Power supply type: battery-powered models prioritise immediate start-up, freedom from cables and reduced engine maintenance. Petrol versions offer operating continuity through refuelling and are suitable for prolonged work;
• Blade length and effective cutting length: a longer blade covers a larger section of the hedge with each pass and makes it easier to create even surfaces. A shorter blade provides greater control when finishing, in tight spaces and close to walls or fences;
• Tooth spacing: the distance between the teeth must be considered in relation to the branch thickness specified in the model's technical data sheet. A wider spacing can accommodate thicker vegetation, but does not replace checking the stated maximum cutting diameter;
• Blade movement: the opposing double-blade system cuts through the alternating movement of the two blades. This configuration promotes an even cut and limits the stresses transmitted during pruning;
• Weight and balance: the overall weight also includes the battery in models that use one. Balanced weight distribution facilitates control during side, vertical and top-of-hedge cuts;
• Handle and controls: the shape, covering and position of the handles affect the operator's grip and posture. Safety switches and easily accessible controls reduce the risk of accidental start-up;
• Battery runtime or internal combustion engine: for battery-powered hedge trimmers, voltage, capacity and approximate runtime must be checked. For petrol models, engine displacement, fuel type, tank capacity and the maintenance specified in the manual must be considered;

The AMA hedge trimmers in this category mainly meet hobby-level needs, such as seasonal pruning of ornamental hedges, edge trimming and shaping shrubs in domestic gardens. Choosing a configuration with greater runtime can also be useful for properties with long hedges or for repeated work throughout the day.

The two available power supply types meet different operating conditions. The choice depends on the length of the hedge, the distance from power sources, the duration of the work and the frequency of pruning. Weight, maintenance and start-up method also help determine the most suitable configuration.

AMA battery-powered hedge trimmers are suitable for the periodic care of ornamental hedges, shrubs and bushes in domestic gardens. The absence of a cable provides freedom of movement around plants and allows areas far from electrical outlets to be reached. Start-up via a control allows cutting to begin without preparing fuel or operating pull-start systems. The electric motor requires less routine maintenance than an internal combustion engine, although cleaning and lubrication of the cutting system are still necessary. Before purchasing, check whether the battery and charger are included. Voltage, capacity in Ah and stated runtime must be considered in relation to the expected duration of the job. Blade length and tooth spacing, on the other hand, determine the surface covered with each pass and the thickness of vegetation compatible with the model.

• Freedom of movement: cordless operation makes it possible to move along the hedge without depending on the location of electrical outlets. The work must nevertheless be planned according to the available battery charge;
• Immediate start-up: activation via a control eliminates the operations typical of fuel-mixture engines. Safety devices require a correct grip before the blades start moving;
• Lithium-ion battery: voltage and capacity contribute to determining power delivery and operating duration. Actual runtime also varies according to branch thickness, cutting pace and battery condition;
• Limited maintenance: there is no carburettor, spark plug or fuel filter. Cleaning, inspection, lubrication and proper blade storage are still necessary;

AMA petrol hedge trimmers are designed for work requiring autonomy independent of the electrical grid and charging times. Refuelling allows work to continue after a short interruption, a useful feature for long hedges or large properties. However, the internal combustion engine requires more extensive periodic checks, which may include the air filter, spark plug, fuel and components specified in the manual. Before starting, the fuel mixture or fuel specified by the manufacturer must be used, following the quantities and procedures given in the instructions. Weight, vibrations and noise levels must be considered together with the duration of work sessions. A stable grip and regular breaks help maintain precision in side and top cuts. Blade length, tooth spacing and the stated maximum cutting diameter remain the main references for assessing compatible vegetation.

• Autonomy through refuelling: the internal combustion engine allows work to resume after adding the specified fuel. Refuelling must be carried out with the engine switched off and cooled down, following the manual;
• Use over extensive areas: the absence of cables and batteries requiring recharging makes this configuration suitable for long hedges and locations far from the electrical grid. Work duration must nevertheless be organised taking weight and vibrations into account;
• Engine maintenance: the air filter, spark plug and fuel system require the checks specified by the manufacturer. Old or incorrectly prepared fuel can compromise starting and smooth operation;
• Start-up and safety: the procedure may include a primer, choke control and pull-start system, depending on the model. Before starting, check that the blades, guards and handles are intact;

Buying an AMA hedge trimmer from AgriEuro allows you to consult technical data sheets, supplied equipment and features of the available models before ordering. Dedicated services also support the product from shipping through to subsequent service and maintenance requests.

• Fast and free shipping: shipping is managed directly by AgriEuro's logistics centres, with order preparation and delivery tracking. The product is handled through a structure specialised in the distribution of gardening and agricultural machinery;
• Possibility to order spare parts that are always available: after purchase, the spare parts diagram linked to the product can be accessed within the personal account. The system makes it easier to identify compatible components and order the spare parts needed for machine maintenance;
• Attentive and personalised after-sales service: the AgriEuro service supports post-purchase requests and work covered by the warranty. The network includes the central workshop and AgriEuro service centres located throughout the territory;

Choose and buy from AgriEuro the AMA hedge trimmer best suited to maintaining your hedges.

The choice mainly depends on the duration of the work and the size of the hedge. An AMA battery-powered hedge trimmer is suitable for domestic work, periodic finishing and situations where immediate start-up and limited maintenance are important. A petrol model is better suited to prolonged sessions and locations far from the electrical grid, since it can resume work after refuelling. Before purchasing, weight, cutting system and required maintenance operations should also be compared.

The blade length should be proportionate to the depth and shape of the hedge. A long blade covers more surface with each pass and makes it easier to create even sides on extensive hedges. A shorter blade offers greater control when shaping, close to obstacles and on compact shrubs. The effective cutting length, which may differ from the overall length of the bar, must be assessed.

Tooth spacing indicates the space between the blade elements and helps determine the vegetation that can enter the cutting system. It does not automatically correspond to the maximum diameter of branches that can be cut. To establish the compatible thickness, the specific value stated in the hedge trimmer's technical data sheet must be checked. Branches exceeding this specification must be cut with a suitable pruning tool.

Runtime varies according to the model, battery capacity and working conditions. The thickness of the vegetation, the number of interruptions and the cutting pace can reduce or extend the duration compared with the indicative figure. For an accurate assessment, the values stated in the data sheet of the individual AMA battery-powered hedge trimmer must be consulted. A second compatible battery can limit interruptions during longer jobs.

No, the battery and charger are not included in all configurations. Some hedge trimmers are sold complete with the components required for charging; others are offered as bare tools for those who already own compatible batteries from the same platform. The supplied equipment section in the AgriEuro data sheet specifies which items come with the product. Voltage and compatibility must also be checked before using batteries purchased separately.

The fuel depends on the type of engine fitted to the model. Two-stroke engines normally require a mixture of petrol and oil in the proportion specified by the manufacturer. A generic ratio must not be used, as an incorrect mixture can damage the engine or cause irregular operation. The manual for the AMA petrol hedge trimmer specifies the correct fuel, oil, proportions and refuelling procedure.

The blades must be cleaned after use, with the machine switched off and the power source disconnected. On battery-powered models, the battery must be removed; on petrol models, wait until the engine has stopped and cooled down. Plant residues and resin can be removed using compatible tools and cleaning products specified in the manual. After cleaning, apply the specified lubricant along the blade, avoiding products not approved by the manufacturer.

The blades require sharpening when the cut becomes uneven, branches are torn or the machine operates with greater difficulty. Before taking action, resin build-up, damage, deformation or lubrication problems must be ruled out. Sharpening must comply with the angles and procedures specified by the manufacturer. If teeth are damaged or there is any doubt about the procedure, it is advisable to contact a service centre.

It is preferable to work on dry vegetation and in stable weather conditions. Wet branches and ground can reduce the operator's stability and make the machine's movement more difficult to control. Moisture can also encourage plant residues to stick to the blades. The environmental limitations and safety instructions contained in the model's manual must always be observed.

During work, at least protective goggles, suitable gloves, stable footwear and close-fitting clothing are required. Hearing protection may also be required for noisier models. Before starting, the hedge must be checked and any wires, objects and hidden obstacles removed. The cutting system must be kept away from the body and the machine must only be carried with the blades stationary, using the blade cover where provided.