Petrol Chainsaws for Tree Cutting and Felling

Petrol chainsaws for tree cutting and felling are machines with a 2-stroke engine (petrol + oil), designed for cutting wood and felling trees. This configuration allows you to work even away from power sockets, with sufficient cutting power always available and a long runtime.

This sub-category includes models with a rear handle, which ensures a stable grip when cutting trees or timber with large diameters. The standard guide bar is the typical cutting system for felling and cutting trees, even those with large diameters, with lengths ranging from 40 cm to over 50 cm depending on the type of work.

AgriEuro offers various types of petrol chainsaws for tree cutting and felling:

• Lightweight petrol chainsaws for cutting (30–39 cc): small displacement and low weight; suitable for cutting firewood and occasional work;
• Medium-sized petrol chainsaws for cutting (40–49 cc): a balance between torque and manoeuvrability; suitable for frequent cutting of medium-sized logs;
• Large professional petrol chainsaws for cutting (50–60 cc): designed for intensive use; paired with long bars for cutting and felling large sections.

Petrol chainsaws for tree cutting and felling are used to make quick, deep cuts on large-diameter logs and trunks, as well as for controlled felling operations. The 2-stroke petrol engine ensures adequate power in demanding conditions and allows you to work in wooded or agricultural areas without power supply constraints.The rear handle provides a stable grip during felling cuts, directional cuts and sectional felling; the standard bar is suitable for ‘full’ cutting operations on hard and resinous wood.

Some examples of practical use:

• Felling trees in woodland or on agricultural land: making directional notches and felling cuts on large-diameter trunks;
• Cutting logs on the ground: cutting into pieces for storage, drying and preparation of wood-fired fuel;
• Limbing and cleaning of the trunk after felling: removal of the main branches before handling the timber;
• Clearing of fallen or damaged trees: cutting of trunks and branches to restore wooded areas and farm tracks;
• Preparing timber for transport: cutting trunks into sections suitable for trailers, skips or stacks.

Petrol-powered chainsaws for tree cutting and felling cater to various levels of expertise. Hobby models are suitable for limited use and low performance, typically for occasional cutting. Semi-professional versions offer good quality and average performance for infrequent use. Professional chainsaws are designed for frequent use, with high performance and more sturdy components. Industrial models are intended for continuous use, with maximum performance for intensive forestry work.

Petrol chainsaws for tree cutting and felling operate via a 2-stroke engine (fuel mix) that transmits rotational motion to the chain drive pinion. The pinion drives the cutting chain, which runs along the standard guide bar, allowing the wood to be progressively removed via the cutting teeth.The rear handle allows for stable control of the machine during felling cuts and the sectioning of large-diameter logs.

Operation can be described in stages:

• Starting the two-stroke engine: fuelled by a mixture of petrol and engine oil; the speed is increased via the throttle;
• Transmission of motion to the chain: the pinion transfers rotation to the chain, which runs in the groove of the guide bar;
• Cutting the wood: the chain teeth cut into the wood fibres during controlled forward advancement over the section to be cut;
• Lubrication of the cutting mechanism: chain oil reduces friction and overheating during operation;
• Control and safety: the chain brake stops the chain in the event of kickback.

During use, the chainsaw is held firmly by the rear and front handles. The saw is fed into the wood with gradual pressure, without forcing the bar, maintaining correct alignment during cutting and felling.

Petrol chainsaws for tree cutting and felling stand out for their structure and configuration, designed for heavy-duty work. The 2-stroke petrol engine provides continuous power when cutting large sections. The rear handle and standard guide bar make these machines suitable for felling and cutting operations on large-diameter logs.

The main advantages of this type of chainsaw are:

• High cutting power: the petrol engine develops torque suitable for cutting through hard and resinous wood. This feature allows for deep, continuous cuts on large trunks;
• Operational autonomy: the petrol-powered system allows you to work without electrical connections. The machine is suitable for wooded and agricultural surfaces far from infrastructure;
• Stability during felling: the rear handle improves control of the chainsaw during the tree’s direction and fall. The grip remains firm even during angled cuts;
• Compatibility with long bars: bars ranging from 40 cm to over 50 cm extend the cutting capacity on large-diameter logs. This configuration reduces the number of passes required;
• Sturdy construction: models with magnesium casings offer mechanical strength and low weight. Versions with a plastic frame are lighter for non-professional use.

Compared to other cutting tools such as electric or battery-powered chainsaws, petrol chainsaws for tree cutting and felling offer greater power and autonomy during prolonged use. Unlike pruning models, they are designed for ‘full’ cuts and felling, not for precision work on thin branches.

Petrol chainsaws for tree cutting and felling are different in terms of engine capacity, design and dimensions of the cutting mechanism. These different options allow you to select the chainsaw best suited to the type of timber, the frequency of use and the diameter of the logs to be cut. The differences relate to motor power, bar length, net weight and build quality.

This category includes models with a rear handle and standard bar, designed for felling and cross-cutting operations. The 2-stroke petrol engine delivers sufficient power to cut large-diameter logs, with smooth penetration into the wood. The handle configuration improves control during directional cuts and in the final phase of tree felling. The guide bars range from 40 cm to over 50 cm, depending on the machine’s design. These chainsaws are used in agriculture and forestry for work on medium to large surfaces.

• Rear handle: stable grip during felling and cutting;
• Standard guide bar: suitable for full-depth cutting of large-diameter timber;
• Mixed-fuel engine: extended operating time and consistent motor power.

Lightweight petrol chainsaws for tree felling and cutting have a displacement of between 30 and 39 cc and a low net weight. They are designed for cutting firewood and for work on medium-diameter logs, with non-continuous use. The body is often made of plastic, a solution that reduces the machine’s overall weight. The standard guide bar is generally between 40 and 44 cm in length, suitable for ground-level cutting work. This category is suitable for domestic and agricultural use with limited workloads.

• Small displacement: low fuel consumption and manoeuvrability;
• Low net weight: reduced fatigue during use;
• 40–44 cm guide bar: suitable for cutting medium-sized logs.

Medium petrol chainsaws for tree cutting and felling have a displacement of between 40 and 49 cc and represent an intermediate solution between lightweight and professional models. They offer a good balance between motor power and control during cutting. The standard bar can be up to 49 cm long, allowing work on larger-diameter logs. These machines are used for frequent wood cutting and felling medium-sized trees. The body can be made of reinforced plastic or light alloy.

• Intermediate displacement: suitable for frequent cutting;
• Bars up to 49 cm: greater cutting depth;
• Sturdy construction: longer lifespan compared to lightweight models.

Professional petrol chainsaws for tree cutting and felling have a displacement of between 50 and 60 cc and are designed for intensive use. The magnesium structure ensures mechanical strength and keeps the weight down. These models support very long bars, from 45 cm to over 50 cm, for felling and cutting large-diameter trunks. The engine develops high torque, suitable for frequent use in forestry. The net weight is higher, but balanced to ensure stability during work.

• Magnesium construction: strength and durability;
• Blades over 50 cm: suitable for large sections;
• High performance: frequent and continuous use.

On AgriEuro, you can select petrol chainsaws for tree cutting and felling based on specific technical characteristics, so as to identify the model best suited to the type of work and frequency of use. Technical differences affect stability during cutting, penetration capacity into the wood, operating autonomy and structural strength. Choosing the right specifications allows you to adapt the machine to the diameter of the logs and the hardness of the timber.

The main technical features are:

• Rear handle: this configuration ensures a firm grip when cutting large-diameter trees or timber. It improves control of the chainsaw during felling and sectional cutting;
• Standard bar: the standard cutting bar is suitable for full-cut operations and felling. It offers good penetration into the wood and extensive compatibility with dedicated chains;
• Mixture fuel system: the 2-stroke engine uses a mixture of petrol and oil, a solution that ensures operational autonomy and consistent power. This fuel system is suitable for prolonged work on agricultural and forestry surfaces;
• Frame: the plastic frame is a feature of non-professional models, offering low weight and reduced costs. The magnesium frame is used on professional machines and offers high mechanical strength with limited weight;
• Bar length: this ranges from 40 cm to over 50 cm and directly affects cutting capacity. Bars from 40 to 44 cm are suitable for standard cutting and felling; those from 45 to 49 cm and over 50 cm are designed for large-diameter logs;
• Chain pitch: the .325" pitch is suitable for cutting and felling on medium-powered and high-powered machines. The 3/8" pitch is used on lower-powered chainsaws, typically for hobby use;
• Net weight: between 5.4 and 8.5 kg, including the machine body and cutting unit. Weight affects stability during work and fatigue during prolonged use.

Buying branded petrol chainsaws for tree cutting and felling allows you to choose machines with proven components and consistent manufacturing standards. In models designed for cutting and felling, the robustness of the structure, the quality of the cutting unit and the reliability of the petrol engine are key factors. AgriEuro offers models suitable for both occasional and frequent use.

• BlueBird petrol chainsaws for tree cutting and felling: solutions designed to meet hobby and semi-professional needs, with models featuring small and medium engine capacities. Suitable for cutting wood-fired firewood and occasional work on fallen logs;

Buying a petrol chainsaw for tree cutting and felling on AgriEuro allows you to choose from numerous models selected for wood cutting and felling, with detailed technical specifications and immediate availability. The range covers various levels of use, from machines for occasional use to models designed for frequent and continuous work.

The main advantages of buying from AgriEuro are:

• Fast, free delivery: rapid delivery managed directly by AgriEuro’s logistics centres, with packaging suitable for cutting machines;
• Spare parts always available: the option to order original components compatible with the cutting mechanism and engine;
• Attentive and customised after-sales service: dedicated technical support for information, maintenance and spare parts over time.

Browse the AgriEuro catalogue and select the petrol chainsaw for tree cutting and felling best suited to your intended cutting and felling tasks.