Robot Lawn Mowers ANTHBOT

ANTHBOT robotic lawn mowers automate the periodic mowing of residential lawns of different sizes and layouts. The technological path behind the brand began with the founders' experience in robotics and sensor technology: in 2016, the group focused its development on sensors for robots; in July 2022, it decided to enter the robotic lawn mower sector; and in May 2023, it introduced Pion. The range was subsequently expanded with Genie, announced for 2024, and with solutions designed for lawns of different sizes. ANTHBOT also states that it has an operational presence in China, Vietnam and Germany for research, production, commercial activities and customer support. At AgriEuro, the selection allows you to compare machines for compact or medium-large areas and accessories designed to protect the charging station and robot:

• ANTHBOT Robotic Lawn Mowers for areas up to 500 m²: suitable for compact residential gardens, where the correct working capacity promotes regular mowing cycles. The choice should also take into account the shape of the lawn, passages, obstacles and slopes.
• ANTHBOT Robotic Lawn Mowers for areas from 1000 to 1500 m²: designed for larger lawns, they require an operating capacity consistent with the total area and programmed mowing frequency. Division into zones, terrain layout and charging station position all affect the choice.
• ANTHBOT Robotic Lawn Mower Garages: provide dedicated cover for the robot and charging station when they are installed outdoors. Compatibility, overall dimensions and accessibility of the controls should be checked before purchase.

At AgriEuro, products can be selected according to their technical features, making it easier to identify the robot best suited to the needs of your lawn. The assessment should start with the actual surface area and continue with the garden layout, navigation system, programming and ground conditions:

• Maximum recommended area: identifies the lawn area for which the model is designed. The classes up to 500 m² and from 1000 to 1500 m² make it possible to narrow down the choice according to the garden.
• Boundary and navigation system: the ANTHBOT range includes solutions that, depending on the model, use either a perimeter wire or wire-free systems based on sensors, vision, LiDAR or RTK positioning. The specification sheet for each robot indicates the technology used and the installation requirements.
• Mapping and app control: on compatible models, the app supports map configuration, mowing schedules and zone control. Wi-Fi or Bluetooth coverage, updates and available modes depend on the selected model.
• Slope and lawn layout: the stated slope limit should be compared with the actual gradients, including edges and connections between zones. Holes, exposed roots, stones and narrow passages can alter the robot's route.
• Cutting system and maintenance: cutting height, blade condition and cycle frequency affect the uniformity of the lawn. Models with mulching cut the grass into fine pieces and release it onto the ground, without collecting it in a grass catcher.
• Charging station and garage: the charging station must be positioned according to the distances and conditions specified in the model's manual. A compatible garage adds overhead protection and must leave the robot free to access the charging station.

For hobby use on a compact garden, a model for areas up to 500 m² concentrates capacity and programming on short, regular cycles. On areas from 1000 to 1500 m², demanding hobby use requires greater attention to operating autonomy, lawn division, slopes and the time available to complete the programme.

The AgriEuro selection distinguishes ANTHBOT robotic lawn mowers according to the recommended area and also includes the dedicated garage. This classification helps compare working capacity and installation context. Each type is designed for different lawn conditions and requires checking the corresponding technical specification sheet.

ANTHBOT robotic lawn mowers for areas up to 500 m² are designed for compact residential lawns, such as gardens around detached houses, green courtyards and grassy areas surrounding the home. In this class, choosing the correct capacity makes it possible to schedule frequent mowing without oversizing the machine. Before purchasing, it is useful to measure only the grassy surface, excluding paved areas, flower beds and buildings. The shape of the lawn matters as much as its size: narrow sections, trees, garden furniture, raised edges and separate areas may require more careful mapping. Depending on the model, ANTHBOT offers wire-free navigation technologies and app-based control functions; the actual equipment must be checked in the technical specification sheet. Regular mowing limits the amount of grass removed on each pass and promotes a more uniform finish. The charging station must also be positioned where it has unobstructed access, stable support and the connections required by the manual.

• Recommended setting: the class up to 500 m² is suitable for compact lawns subject to recurring mowing. Measuring the area and counting the number of obstacles helps estimate the actual workload.
• Garden layout: a simple layout facilitates mapping and movement towards the charging station. Where there are passages or separate sections, the multi-zone functions available on the model should be checked.
• Mowing regularity: frequent cycles remove small amounts of grass and reduce build-up under the cutting deck. If the lawn is very tall, it is advisable to perform a traditional cut first, bringing it down to a height permitted by the robot.

ANTHBOT robotic lawn mowers for areas from 1000 to 1500 m² meet the needs of large residential gardens, where distance, number of zones and cycle duration play a greater role. The nominal area is the first reference point, but it should be considered together with slopes, edge complexity and the presence of passages between lawn sections. Complex terrain may require more manoeuvres and a programme spread over several sessions. Depending on the model, the latest ANTHBOT solutions use navigation based on sensors, vision or satellite positioning and allow maps and zones to be configured through the app. The availability of these functions should always be checked on the product page. To maintain regular mowing, frequency, height and schedules should be set in line with seasonal growth. The charging station must remain accessible and stable; any obstacles along the return route may interrupt the cycle or require a new configuration.

• Capacity for large lawns: the 1000 to 1500 m² range is suitable when the grassy area exceeds that of a small garden. The operating margin should be assessed by considering shape, slope and mowing frequency.
• Zones and routes: lawns separated by corridors or passages require functions compatible with the existing layout. The map must correctly describe boundaries, connections and excluded areas.
• Seasonal programming: rapid growth, rain and wet ground can alter the planned schedule. More frequent programming during periods of faster growth prevents the robot from having to cut excessively tall grass.

The ANTHBOT robotic lawn mower garage is an accessory designed to cover the machine while it is parked at the charging station. The structure provides overhead protection from direct exposure while leaving the robot enough space to enter and leave the station. Before ordering, compatibility with the model you own, overall dimensions and the intended fastening system should be checked. The installation point must comply with the charging station instructions, because the cover does not replace the requirements concerning stable ground, power supply and the return route. Opening the cover and accessing the controls must also remain easy, according to the robot's configuration. A preliminary check prevents interference with sensors, antennas or connections. The garage therefore completes the outdoor installation without altering the machine's mowing capacity, recommended area or navigation functions.

• Compatibility: the garage must match the dimensions and charging station of the specified ANTHBOT robot. The accessory page and manual make it possible to check the intended combinations.
• Positioning: the cover must not obstruct entry, exit or charging contacts. The ground underneath must remain stable and the route towards the lawn must be clear.
• Accessibility: controls, cover and parts requiring periodic inspection must remain accessible. The surrounding space should allow cleaning and checks without having to continuously move the structure.

Purchasing an ANTHBOT robotic lawn mower from AgriEuro allows you to combine your choice of model with dedicated delivery, spare parts and after-sales support services. These services also support the machine during subsequent maintenance activities:

• Fast and free shipping: orders are prepared and shipped from AgriEuro logistics centres, with availability and delivery times indicated on the product page. Direct management of shipping makes the route traceable through to delivery.
• Option to order spare parts that are always available: after purchase, the spare parts diagram associated with the product makes it possible to identify compatible components. Access through your account reduces the risk of ordering a part that is not suitable for the ANTHBOT model you own.
• Attentive and personalised after-sales support: the AgriEuro service supports customers with requests after delivery and with the procedures provided for the product. The central workshop and service centres provide a practical point of reference for repairs under warranty as well.

Buy the ANTHBOT robotic lawn mower best suited to your lawn from AgriEuro now and complete the installation with compatible accessories.

The choice starts with the actual square metres of lawn to be mowed. You should then consider shape, slopes, obstacles, narrow passages and separate zones, because these factors can lengthen mowing cycles. At AgriEuro, ANTHBOT models for areas up to 500 m² can be distinguished from those for areas between 1000 and 1500 m².

The boundary system depends on the model. ANTHBOT has developed both wired solutions and more recent wire-free robots based on combinations of sensors, vision, LiDAR or RTK positioning. The technical specification sheet explains which installation is required and which conditions the garden must meet.

On models equipped with mapping, the procedure is carried out through the app by following the robot's instructions. While creating the map, the route must be free of obstacles that could block the machine. If the procedure fails, the obstruction must be removed, the robot returned to the charging station and the steps specified in the manual repeated.

Yes, when the model has multi-zone functions and the garden layout allows connections between the different areas. The map, passage corridors and excluded zones must be set according to the app instructions. The number of programmable zones varies between models.

Its behaviour depends on the sensors and navigation technology installed on the model. Before mowing, wires, branches, toys and low objects that could reach the blade disc or block the wheels should be removed. Holes and obstacles that cannot be detected must be corrected or excluded from the working area.

On models equipped with a rain sensor, the programme can be suspended and resumed after the rain has stopped, with the delay specified in the settings. Very wet ground can reduce traction and mowing quality. Functions and protection rating must be checked in the specification sheet and manual of the individual robot.

ANTHBOT models with mulching finely chop the grass clippings and distribute them over the lawn, so they do not require a grass catcher. The result is more even when the robot mows frequently and removes a small amount on each pass. The availability of mulching should be checked in the model's specifications.

A lawn with very tall grass generally requires preliminary mowing with a traditional lawn mower. The grass must be within the height range permitted by the robot before automatic cycles are started. Afterwards, frequent passes help maintain a more uniform height and reduce the load on the cutting system.

Routine maintenance includes checking and cleaning the wheels, body and blade disc with the machine switched off, according to the manual. The blades should be rotated or replaced when they become blunt, damaged or produce an uneven cut. Before seasonal storage, the ANTHBOT instructions for cleaning, battery care and storage should be followed.

The garage provides overhead cover for the robot and charging station while they are outdoors. It must be compatible with the model and installed without obstructing return, charging, sensors or access to the controls. It does not replace the required distances, stable ground and other requirements specified for the charging station.