Ryobi RY48RM76A Battery-powered Riding-on Mower - 48 V/50Ah Battery-powered Electric Motor - 76cm Cutting Width - 2 in 1

Ryobi RY48RM76A riding-on mower with side discharge.

A powerful, sturdy, stable and comfortable machine; the riding-on mower is perfect for professional grass cutting in all conditions: whether for large lawns, gardens or fields or even for parks to be maintained and wherever you need to mow grass around trees and flowerbeds with little effort and in total comfort.

It belongs to a battery-powered riding-on mower range, for offering an alternative to petrol riding-on mowers to mow large-sized areas.

Intuitive driving with forward / reverse speed controlled by the same pedal.

Steering radius: 40 cm

It is equipped with a powerful brushless electric motor with 4x 12 V lead-acid batteries, for a total of 48 V and 50Ah.

Up to 1 h autonomy with a single charge, enough to mow up to 2500 s.q. m.

The centralised cutting height is adjustable in 7 positions: from 35 mm to 115 mm.

Driving speed:

• Max. forward speed: 12.8 Km/h
• Max. reverse speed: 5 Km/h

Wheels size:

• Rear wheels 16x6.50-8
• Front wheels 15x5.00-6

This riding-on mower is equipped with a powerful 48 V/50Ah brushless electric motor (4x 12 V lead-acid batteries).

It is equipped with 3 high torque brushless motors which power the blades and transmission, for a great cutting performance.

Smart motor, a great combination of technology and mechanical engineering.

Zero fuel, zero emissions

Low maintenance: No belts, spark plugs or filters

Up to 60 min. autonomy with a single charge or every 4000 s.q. m. of mowing area.

Easy access to the battery charger compartment.

100% charge in 12 h and 60% in 6 h.

Max. forward speed: 12.8 Km/h

This Ryobi riding-on mower uses the same technology of standard car batteries. The advantages of this technology are: high autonomy and high power, perfect for this type of riding-on mowers. To maintain this performance, it is necessary to charge the battery when not in use, particularly in cold weather, to prevent the battery from being discharged for long periods. The battery charger is designed to keep the battery fully charged when the riding-on mower during storage. Therefore it is advisable to keep it always connected to the battery charger when not in use.

1- SIDE DISCHARGE: this is the most traditional cutting system which allows cutting the grass without collecting it into the grass collector. For those who have to mow large-sized areas without needing to collect grass, for who doesn’t cut grass too often and has to cut over-grown grass for which the mulching or the grass collection system are no longer efficient.

2- MULCHING: this grass mowing system allows crushing grass clippings and dropping them on the ground. The resulting grass particles are so small, they will be barely noticeable on the lawn. This eliminates the problem of its disposal (reducing any effort and shortening the time-saving). Moreover, grass clippings will break down into nutrients and water for the lawn (grass is 80% water) and will thus ensure a perfectly balanced biological cycle. However, it is worth remembering that, to ensure the greatest mulching results, the lawn should be irrigated and the grass needs cutting at least once a week.

Simply close the side discharge with the proper plug to convert the machine from a cutting system to another one.

Intuitive and user-friendly controls.

• Battery level indicator and speedometer: when the indicator reaches the red light, the motor will automatically switch off until next recharge.

• Blade control button (red button): pull the button to operate the blades; push it to stop them.

• LED button: it allows switching on the LED lights

• RMO button: it allows operating the blade even while working in reverse mode

• Parking brake

• Accelerator pedal (on the right of the steering wheel)

• Reverse seed pedal (under the accelerator pedal)

• Brake pedal (on the left of the steering wheel)

• Cutting height adjustment lever

Sturdy die-cast 2-blade cutting deck: it is a sturdy, high profile cutting deck thought to mow high and thick grass. 76 cm real cutting width.

The centralised cutting height is adjustable in 7 positions, from 35 mm to 115 mm.

The mowing blades of the riding-on mower can be set through the controls on the dashboard (red button): then the machine is equipped with an electromagnetic cutting blades engagement.

Cutting area: 2500 s.q. m.

Steering radius: 40 cm

Ryobi RM480e additional features:

• Can holder compartment
• Large-sized tyres: they ensure higher care of the lawn and great adherence to the ground and traction on a riding-on mower.
• The driving seat can be adjusted according to the Operator’s needs and lies on large springs to absorb eventual bumps due to an uneven terrain.
• LED headlights
• Ergonomic steering wheel (like a car one)
• Operator detection device
• Low vibrations
• Bull bar
• Tow hitch
• Sturdy tires for every type of terrain
• Drum brakes on the rear wheels
• Speed variator with pedal for adjusting the engine speed

*The riding-on mower is shipped already assembled; you’ll only have to assemble the driving seat and steering wheels with 2 screws.