Domino Petrol Rough Cut Mower-Scythe Mower Honda GCV 200 engine

DOMINO "PRO SPEED” petrol rough cut mower can destroy large quantities of any type of weeds of any diameter, height and dimensions (up to 1.5 m height), finely chopping them.
It cuts grass, undergrowth and brambles in any conditions, in the most inaccessible places (even on slopes), thanks to the large front opening of the cutting deck. It is used against weeds in orchards, vineyards, olive groves (especially for grassing), or by nurserymen, institutions, or green operators who use it to clear uncultivated areas. The hourly working output is 7/8 times higher than that of a regular brush cutter while the results are cleaner and more even.

It features a Honda GCV200 engine with 201 cc, delivering a power of 6.5 Hp. It also has a 3-speed gearbox.

It stands out from almost all other machines of its category on the market (with the blade directly mounted on the drive shaft) because of its belt-driven transmission between the engine and blade. It is therefore better protected from accidental impacts and stones. The blade is assembled on a shaft made of sturdy steel. The drive belt has a friction effect: in case of collision it tends to slip, avoiding most of the inconveniences. Therefore, the engine is always 100% protected.

Another outstanding advantage consists of the blade engagement/disengagement lever. This innovative machine allows the blade to be activated only when necessary: this enables to move using traction, with the blade stationary. The wheels are also equipped with an oil-filled gear drive unit capable of withstanding any amount of effort.
Chain drive.

The rough cut mower features a dual cutting system. It only takes 5 minutes to change cutting system thanks to the supplied kit.

The line head is entirely made of steel. This sturdy and thick head is durable and really resistant to strong impacts. Suitable for several types of weeds, it provides a better performance than a heavy-duty brush cutter.

Specifically for small and medium height and size grass, it allows a cutting width of up to 73 cm using 4 mm thick line.

In addition, the line can perform all those tasks that are trickier for the blade (around trees, near walls or pavements, fences etc.).

The slender head allows you to reach the narrowest spaces.

New mulching blade: it shreds the grass very finely (thus accelerating as much as possible the grass decomposition process), giving a clean and pleasant look to your lawn, while also eliminating the risk of clogging the deck.

53 cm cutting width

Its rotating blade system is studied for difficult operations, on tall or thick grass, up to bushes or shrubs with a 1.5/2 cm woody stem.

Since the machine can withstand any workload, there is no height limit of the grass to cut.

WHAT IS MULCHING CUT?: a cutting system that shreds the cut grass, releasing it onto the lawn afterwards, so finely shredded that it looks as if it has been collected. This eliminates the problem of its disposal (reducing effort and saving time). Moreover, grass clippings will break down into nutrients and water for the lawn (grass is 80% water) and will thus ensure a perfectly balanced biological cycle. However, please remember that to ensure the greatest mulching results, the lawn should be irrigated and the grass needs to be cut at least once a week.

Innovative three-speed gearbox
For example, you can select the first gear when you need to cut grass taller than 1 m, for an effective cutting (no cloggings) and disposal, or working on inaccessible areas and uneven surfaces, or where there are many obstacles such as trees and a low speed is required to carry out the various manoeuvres more easily. You can select the third gear while working on flat grounds and not excessively tall grass, saving time.

Very thick steel frame for increased machine sturdiness.

Three gears.

The rough cut mower features belt transmission. This system ensures higher protection compared to direct transmission machines, that is with the engine directly connected to the blade. Accidental impact of the blade with a stone or other object does not threaten the integrity of the engine as its shaft is not directly connected to it.

The steering handles are sturdy and adjustable; all the machine controls are placed on them.

RED LEVER TOP LEFT:

to move forward at the speed selected on the gear

LOWER LEFT LEVER:
engages the reverse gear, to carry out any type of manoeuvre

RED LEVER TOP RIGHT:
blade insertion (activates the blade or the line head)

LOWER RIGHT LEVER:
parking brake insertion (for parking the machine even on steep slopes)

Throttle lever

Heavy-duty blade brake
It is a friction lining that acts instantaneously on the blade hub when the lever on the handlebar is released.