Honda GX 35 I - 4-stroke gasoline brush cutter - Blue Bird shaft

The brush cutter powered by Honda GX 35 I engine is a heavy-duty tool which combines power, efficiency, reliability and versatility at the same time.

This brush cutter is ideal for working in narrow working spaces thanks to its single handle and extreme handling.

Why choose a Honda brush cutter? 4-stroke brush cutters are the most advanced machines on the market thanks to their absolute efficiency in every aspect:

• High rpm rate
• High power output
• Renowned Honda reliability
• Extremely lightweight, only 7.4 kg
• Petrol-powered, no need to prepare mixture
• 50% lower consumption than 2-stroke engines
• 70% less polluting emissions than 2-stroke engines
• 30% noise reduction compared to 2-stroke models
• 40% less vibrations than 2-stroke models
• Quick and efficient start
• Reduced recoil compression
• Extremely durable made in Italy transmission

The brush cutter is shipped already ASSEMBLED and ready for use (it is only necessary to tighten 4 screws for the stone guard)

Brush cutters with HONDA GX35 engine are particularly innovative products thanks to their new 4-stroke engines. Lower consumption, less polluting emissions, less noise and increased comfort thanks to the use of petrol:

• POLLUTING EMISSIONS: - 70% approx.
• CONSUMPTION: - 50% approx.
• NOISE LEVELS: - 30% approx.
• VIBRATIONS: - 40% approx.

Moreover, thanks to technological research, Honda invented the first 4-stroke engine which operates at any inclination. This configuration is called "any-side-up".

Honda GX35 is a 35.8 cc, air-cooled, 4-stroke engine. It is equipped with a single cylinder and it develops a max. power of 1.30 Hp at 7000 rpm, and a torque of 1.60 Nm at 5500 revolutions per minute.

The weight and the size of the engine are highly reduced, only 3.3 kg dry per 20x23x23 cm.

Equipped with a 0.63 L fuel tank, the Honda GX35 engine runs on unleaded petrol. Also equipped with a 100 ml oil tank, which feeds the unique lubrication system that Honda has developed for these engines.

No more fuel issues and no need to prepare the mixture or worry about having fresh mixture supplies. Eco-friendly engine: one of the least polluting models of this sector.

Focus on the carburetor and the choke lever.

Focus on the recoil start system.

WARNING: the engine does not contain oil (read the instructions manual before use)

The Blue Bird Industries transmission shaft consists of an aluminium tube with a diameter of 28 mm which contains an 8 mm inner shaft made of high-strength steel.

It is equipped with a set of 6 professional self-lubricating bushings to ensure long durability even under heavy-duty and demanding use.

The materials used for both the shaft and inner shaft are of the highest quality and made in Italy.

Increasingly, brush cutters with Honda engines and Chinese transmission systems are being introduced onto the market. When subjected to normal working stresses, these units deteriorate very quickly due to the low quality, low hardness and low thickness of the material used. In addition, the very high performance of the Honda engine would require a transmission of the same quality to enable the shaft to withstand the high level of power and performance of the engine.

The Blue Bird Industries bevel gear is entirely made of light alloy and inside it features 4self-lubricating bearings, 2 for the pinion and 2 for the crown. It is the biggest bevel gear of this category, which is also evident from its massive and voluminous size.

The crown and pinion are made of high-strength steel of the highest quality, extremely suitable for withstanding mechanical strain.

Furthermore, the crown and pinion are entirely designed and moulded in Italy.

Increasingly, brush cutters with Honda engines and transmission systems with Chinese bevel gear are being introduced onto the market. When subjected to normal working stresses, these units deteriorate very quickly due to the low quality, low hardness and low thickness of the material used. In addition, the very high performance of the Honda engine would require a transmission of the same quality to enable the shaft to withstand the high level of power and performance of the engine.

Focus on the large stone guard with an additional protective band equipped with removable counter blade. It has to be mounted to work with line heads and removed for operating with the discs or any other attachment.

The brush cutter with Honda GX 35 I engine comes with a soft touch single handle, extremely comfortable to use. This handle is very versatile because you can tilt it as you prefer.

The high soft touch super comfort handle of this brush cutter reduces fatigue, allowing you to use the tool at the right position and angle with both arms extended and relaxed: in fact, the brush cutter allows you to work in the perfect position and inclination by placing the 2 handles on the same level.

The handle is called soft touch because of its soft rubber coating. In addition, it can be slid further forwards or backwards along the tube of the transmission shaft by simply loosening the 4 screws of its anchoring support.

Focus on the controls handle, with the throttle control, power switch and safety switch.

Engine air opening valve

Access to the engine oil compartment