Description

Rover Novax G 20 Electric Gear Transfer Pump - Inox Gears

The Rover series electric pump - Novax G 20 HP 0.6 with stainless steel gears (specific for synthetic oil, with viscosity between ISO VG 80 and 150) was developed for the transfer of non-aggressive viscous liquids of common use, clean and without solid residues such as:

olive oil
synthetic oil
milk
diesel

The viscosity of the liquids to be transferred (at 40 ° C) must be between:

1° Engler (e.g. water, diesel - Intermittent operation only, to avoid overheating)
7° Engler (SAE 30 engine oil or SAE 80 transmission oil, continuous duty).

Rover pumps are very reliable products, easy to clean and perfectly suitable for large amounts of product to be transferred. They are entirely MADE in ITALY to guarantee products of excellent workmanship and functionality.

Features:

230 a.c. power supply
0.6 HP
550 W
2.5 A
fittings ø: 20 mm
rpm: 1450
Maximum flow rate: 15 L/min
μF: 12.5 - 400V
Head lift: 25 m
Max. liquid temperature: 35°C

Rover Novax G 20 Electric Gear Transfer Pump - 0.6 HP - Antioxidant Alloy

NOVAX Impeller and Main Features

Pump body with NOVAX® technology, which makes the surfaces in contact with the liquid more resistant to wear and oxidation.

This version mounts stainless steel gears, which ensure a better pumping capacity and an extremely long product life.

Two Way: it can pump liquids in both directions. One of the many advantages is that it allows very precise transferring, with the possibility of making corrections by pumping the liquid in the opposite direction if necessary. The switch on the control box determines the direction.

The gear electric pumps can suction the liquid up to a maximum of 2 m without being filled; if the difference in level is greater, just place a check valve at the end of the suction pipe and fill it up to the pump. To increase suction capacity, pour approximately 10 ml of the liquid to be transferred into the pump. In any case, it is always important to bring the pump close to the container of the liquid to be transferred. If the pump runs dry for more than 10 seconds, it could be damaged. Never run the pump without the fittings.
Always connect the supplied filter to the suction pipe before starting the pump. All models can work in continuous duty at a maximum pressure of 2 bar (0.2 MPa).

The pump is equipped with a 1.5 m rubber power cable and Schuko safety plug.

Equipped with base and handle for transport.

The electric pump has the following self-priming power:

with full pump and empty suction pipe without foot valve, 3 m

with full pump and full suction pipe with foot valve, 7 m

Free items & Standard equipment

Free Items Included

The product is shipped in its original packaging.

Complimentary suction filter.

Instructions manual included.

Feedback & Reviews

5,00

All customers' pictures

All customers' video

Ordina per:

Rilevanza

Ordina per:

Rilevanza

Ordina per:

Rilevanza

Filtra le recensioni che citano:

4.0

5,00