Name: GeoTech DG 58 F - 4-stroke petrol wheeled brush cutter
Brand: GeoTech
SKU: K501941
Price: 356.12 EUR
Availability: InStock
Rating: 4.28 (378 reviews)

Description

Petrol wheeled brush cutter GeoTech DG58F

The GeoTech DG58F wheeled brush cutter is a very handy and practical brush cutter to use. Despite being an economical product for the buyer, it guarantees safety and reliability.

This wheeled brush cutter is ideal for any user who wants to achieve a higher work output than with a normal brush cutter. The work result is very clean and homogeneous, the grass is shredded finely.

It allows you to tackle difficult areas with tall grass with ease.

It has a very strong steel housing and stone guards, making it safe and protected from impact.

Push forward. The wheels are freewheeling and large (35 cm diameter). The machine runs smoothly during operation.

Equipped with acutting width of 58 cm, it mounts a sturdy MAXI head in aluminium with 4 staggered 4 mm wires, mounted in turn on a steel shaft, emphasising the sturdiness of the machine.

This wheeled brush cutter is distinguished by the fact that it is equipped with a belt drive between motor and blade.

Engine stop safety brake and cutting lever positioned on the handle.

Recommended surface area up to 1100 s.q. m.

Loncin engine 196 cc OHV that guarantees reliability and high performance with low emissions and low fuel consumption.

Weight 39 Kg.

WARNING: This wheeled brush cutter does not include the mounting of discs or blades. It is designed to be used exclusively with the wire head attachment with which it is equipped.

GeoTech DG 58 F - 4-stroke petrol wheeled brush cutter

196 cc Loncin Engine

The GeoTech DG85F comes with a powerful Loncin 196 OHV engine that is appreciated for both its reliability and excellent performance.

Features:

Engine type

Single cylinder 4-stroke

Cylinder type

Aluminium

Displacement

196cm³

Fuel supply

Petrol

Feeding

OVH (overhead valve)

ATTENTION!
The engine is delivered without oil.
Bring the oil to the level before the first start-up.

Rated power: 6.5 HP

* Also called "Commercial Power", we mean the classic standard for defining power that was also officially used until a few years ago by all well-known engine manufacturers. This figure is the one still most widely used and publicised in the main commercial sales channels.

Line Head and Belt TRransmission

This wheeled brush cutter is distinguished by the fact that it is equipped with a gearbox between motor and blade with belt drive.

It is therefore well protected from accidental impacts and stones.

The wire head in reinforced plastics is mounted on a sturdy steel shaft. The belt then has a friction effect, and in the event of a collision it tends to slip, avoiding most of the associated inconveniences, so the motor is always 100% protected from damage.

Being made of reinforced plastics, the wire head is not suitable for areas with large amounts of stones.

It can easily cut various types of weeds, even very large ones, with little effort thanks to the staggered wires. In addition, two further cutting height adjustment supports are supplied.

The working width is an impressive 58 cm

Replacing the wire is really easy and can be done in just a few seconds.

The cutting device is equipped with a mechanical disc brake. When the cutting activation lever is released, the cutting head stops almost instantly, giving the machine a very high standard of safety.

Minimum cutting height 5\6 cm, the machine is equipped with various supports for cutting height adjustment.

Controls and Handlebar

The controls are located entirely in the handlebar.

It can be closed or folded down using the knob at the bottom.

Accelerator lever

The handle is rubberized for optimal working comfort.

Wire head activation and deactivation lever.
This innovative machine allows the wire head to be activated only at the point where the work is to be done, and then deactivated whenever necessary.

Emergency brake lever.
When the lever is released, the wire head stops almost instantly, giving the machine a very high standard of safety.

General features

The housing is made entirely of steel.
This gives it great resistance to accidental impacts or small stones and obstacles during shaving.

The stone guard is made entirely of steel, which distinguishes it from other models on the market that feature plastic stone guards, which are not very sturdy and are easy to break.

The wheels are rubberized and generously sized, a good 350 mm.