Generators Energy Gruppi

Energy Gruppi is an Italian company officially founded in 2003 in Montebello Vicentino, specialising in the design and production of generating sets. Established on the foundations of previous family business experience, between 2007 and 2009 it consolidated its international presence by supplying over 2,000 generators to the Middle East. Its growth continued with its transformation into a limited company in 2011, the expansion of its production facilities and the in-house integration of metalwork and electrical-panel manufacturing.

Energy Gruppi power generators are designed for civil, agricultural, craft and industrial applications, as well as emergency power supply. Italian production, mechanical and electrical testing and the availability of single-phase and three-phase configurations make it possible to identify suitable solutions for tools, machinery and appliances with different power requirements. The documented range includes outputs from 3 kW to 11.8 kW and configurations with Honda GX or Briggs & Stratton Vanguard engines and LINZ Electric alternators, depending on the model.

This page also includes the following types of Energy generating sets, divided according to fuel type and starting system:

• Energy Gruppi petrol generators: suitable for temporary power supply, mobile work and operations in locations without access to the mains. The different power levels allow compatible tools and equipment to be connected according to their rated specifications;
• Energy Gruppi diesel generators: designed for professional activities and frequent duty cycles, according to the specifications of the model. The selection may include single-phase or three-phase outputs and different power classes;
• Energy Gruppi automatic-start generators: designed to operate when the main power supply fails, provided they are installed with the required transfer switch. They are intended for settings where electrical continuity requires starting without manual intervention;

At AgriEuro, Energy Gruppi power generators can be selected according to their technical features, helping users choose a model suited to the appliances to be powered and the expected frequency of operation.

• Fuel type: petrol models are well suited to temporary and mobile applications; diesel versions are also designed for frequent and professional duty cycles;
• Power output: the documented range covers outputs from 3 kW to 11.8 kW. The calculation must account for the combined simultaneous loads and the starting current of motor-driven equipment;
• Single-phase or three-phase current: a single-phase output supplies common 230 V appliances; a three-phase output is intended for compatible 400 V machinery. The choice must always be based on the equipment rating plates;
• Starting system: depending on the model, manual, electric or automatic starting may be available. The latter configuration operates with a correctly sized and installed transfer system;
• Engine and alternator: documented configurations include Honda GX200, GX270 and GX390 engines, 16 or 18 HP Briggs & Stratton Vanguard engines and LINZ Electric alternators. Components and combinations must be checked on the individual generator data sheet;
• Electrical equipment: sockets, protections and regulation systems vary between models. Before choosing, check the voltage, frequency, rated output and compatibility with the intended loads;

Professional configurations can power compatible construction equipment, workshop machinery and agricultural appliances. Models intended for emergency applications can be used at homes, businesses and facilities requiring an alternative power source, subject to correct sizing and the specified installation procedures.

The available types meet different requirements in terms of operating frequency, power and activation method. The fuel type affects the operating context; the starting system determines how the generating set enters service. The comparison should therefore begin with the connected appliances, their required starting current and the expected operating time.

Energy Gruppi petrol generators are suitable for temporary work, mobile operations and backup power in domestic, craft or agricultural settings. They can supply compatible tools and appliances in locations without access to the mains or during occasional power cuts. The choice requires a comparison between rated power, maximum power and starting demand, as power tools, pumps and compressors may require more energy during start-up. Documented configurations include Honda GX-series and Briggs & Stratton Vanguard engines, combined with specific alternators and socket panels depending on the model. Single-phase versions are designed for 230 V appliances; three-phase versions serve compatible 400 V machinery. Before purchasing, check the running time, starting method, electrical protections, weight and equipment supplied with the individual machine.

Aspects to compare include:

• Temporary operation: suitable for construction sites, workshops, agricultural activities and emergency power supply for operating periods compatible with the model;
• Available engines: the listed configurations include Honda GX and Briggs & Stratton Vanguard units, which must be checked on the technical data sheet;
• Output voltage: the choice between single-phase and three-phase must match the equipment to be connected;

Energy Gruppi diesel generators are aimed at professional applications requiring frequent duty cycles and a structure suited to the expected operating environment. They can serve construction sites, farms, workshops and production facilities, provided that their output and electrical configuration are consistent with the connected loads. The selection includes single-phase and three-phase models, with power ratings intended for different tools, pumps, machinery and backup appliances. In addition to rated output, users should assess the required starting peak, the number of sockets, protections, fuel-tank capacity and starting method. Weight and any transport features affect the positioning of the machine. For extended or emergency applications, maintenance intervals, ventilation, exhaust-gas discharge and the manufacturer's instructions must also be followed.

The main elements to assess are:

• Operating frequency: diesel versions are intended for professional and repeated applications, within the limits declared for the model;
• Electrical configuration: single-phase or three-phase outputs must match the voltage and power demand of the intended appliances;
• Scheduled maintenance: oil, filters and periodic checks must follow the intervals and procedures stated in the manual;

Energy Gruppi automatic-start generators are designed to enter service when the main power source is unavailable, as part of a correctly configured system. The transfer panel detects the mains failure, sends the starting command and transfers the power supply to the selected appliances. When mains power is restored, the system returns the load to the primary source and completes the cycle according to the installed control logic. This solution is suitable for homes, companies, workshops and facilities where a power cut could stop priority equipment or services. The power rating must be calculated according to the appliances that must remain active, including the starting demand of electric motors. Compatibility between the generator, ATS panel, voltage and wiring diagram must also be checked. Connections, protections and earthing require assessment by a qualified technician and compliance with the manufacturer's instructions.

For a correct selection, the following must be considered:

• Priority loads: sizing must include only the appliances that need to remain active during a power cut, together with their starting peaks;
• Transfer panel: the generator and ATS must be compatible and configured according to the system wiring diagram;
• Qualified installation: connections, protections and earthing must be defined by authorised personnel;

Purchasing an Energy Gruppi generator from AgriEuro combines technical product selection with dedicated services before and after delivery. Logistics availability, access to spare parts and specialist support accompany the product throughout its operating life.

• Fast, free delivery: orders are prepared and dispatched directly from AgriEuro logistics centres, with organisation dedicated to machines and equipment of different weights and dimensions;
• Option to order spare parts: available components can be identified and ordered using the spare-parts diagram associated with the purchased product, accessible from the personal account;
• After-sales assistance: the AgriEuro service provides attentive, personalised support for technical enquiries, spare parts and service operations following the purchase of the generator;

Buy the Energy Gruppi power generator best suited to your requirements from AgriEuro now.

The power rating is chosen by adding together the demand of appliances operating at the same time and allowing a margin for starting peaks. Pumps, compressors, refrigerators and power tools may require more power at start-up than their rated consumption. The result should be compared with the generator's continuous output, not only its maximum rating. Voltage, frequency and current type must also match the information on the equipment rating plates.

The main difference concerns the fuel type and operating profile. Petrol generators are suitable for temporary work, mobile activities and occasional operation. Diesel models are also intended for frequent professional applications, subject to the specified duty cycle. The choice should consider the duration of the work, required power, starting frequency, running time, weight and maintenance specified for the individual model.

A single-phase generator normally supplies 230 V appliances; a three-phase model is intended for compatible 400 V machinery. The presence of a three-phase socket does not mean that the generator is suitable for every load. Check the voltage, demand and power distribution stated on the technical data sheet. If both types of appliance need to be connected, the power actually available from each output must be checked carefully.

Automatic starting requires a compatible generator and ATS panel. When the mains fails, the system detects the interruption, starts the engine and transfers the selected appliances to the generating set. Once mains power returns, the panel transfers the load back and stops the generator according to the configured sequence. Design, connection and commissioning must be performed by qualified personnel.

Yes, provided the model is sized for the priority loads and the electrical system has suitable connections and protections. Users should determine which appliances must remain active, such as lighting, a refrigerator, boiler or pumps, and calculate their demand and starting peaks. The generator must not be connected directly to the electrical system using improvised solutions. A transfer system that isolates the mains and an installation completed in accordance with applicable regulations are required.

Rated power indicates the output available under the operating conditions defined by the manufacturer; maximum power is available only within the limits and for the period stated in the documentation. Generator sizing should be based primarily on rated power. The maximum value must not be regarded as continuous capacity. A margin should also be allowed for load changes and starting currents.

Starting current is the peak demand at start-up from equipment fitted with a motor or compressor. For a few moments, it may exceed the power demand indicated during normal operation. If the generator lacks the required reserve, its voltage may drop or a protection device may activate. For a correct calculation, consult the appliance manufacturer's information and consider which items will start simultaneously.

The presence of an AVR must be checked on the individual model data sheet. This device automatically regulates the output voltage and limits variations within the system's specified operating conditions. It is not the same as inverter technology and does not automatically make every generator suitable for every electronic device. Before making a connection, check the instructions for both the generator and the appliance to be powered.

Maintenance includes periodic checks of the engine oil, filters, battery, fuel, fasteners and general condition. Intervals and procedures vary according to the engine and model, so the manual must be followed. After long periods of inactivity, check the starting system, fluid levels and condition of the fuel. Periodic tests of automatic systems must follow the system procedures and the manufacturer's instructions.

A generator with an internal-combustion engine must operate outdoors, in a ventilated space and protected in accordance with the manufacturer's instructions. Exhaust gases contain carbon monoxide and must not reach enclosed spaces, doors, windows or air intakes. The machine must be placed on a stable surface, away from flammable materials and protected from conditions that are not permitted. Clearances, earthing and protections must comply with the manual and applicable regulations.