PROMO EGO ST1530 - Battery-powered Brush Cutter - 56V - 4Ah

With a cutting width of 38cm, this tool is ideal for professionals as it can also be used with the reciprocator attachment (sold separately), for more versatility.

EGO ST1530 features a quick-adjust loop handle, which allows you to configure the tool according to your working needs, with optimum balance and control, also thanks to the shoulder strap included

Equipped with a 2.4 mm line with counterclockwise rotation cut. To reload the tool, you need to insert the new line through the slots in the line head, align the ends, hold the head and turn until only a small piece of line protrudes.

A shoulder harness is included in the packaging, for even greater comfort, especially during long work sessions. The strap, combined with the adjustable handle, allows you to work as comfortably as possible.

Two-speed adjustments to cut according to your needs.

Machine equipped with battery charger and 56V/4Ah battery for 45 minute running time.

It is a battery-powered brush cutter, silent, lightweight and easy to use, it only weighs 4.4kg without battery

This machine has many advantages:

• no power cables
• zero emissions
• extremely silent
• handling and comfort

Main advantages of the electric motor:

• More reliable than a petrol engine. It does not have a spark plug, filters, oil dipstick, carburettors or any component that may cause problems.
• Maintenance-free
• Much lighter
• Lower consumption and drastically reduced operating costs compared to petrol engines (great results with minimum power required). No need to constantly provide fuel (which should always be fresh).
• Zero vibrations. Instead, almost all engine-powered machines which are not equipped with an anti-vibration system on steel springs have very strong vibrations, making work quite unpleasant.
• Zero smoke emission, zero impact on the environment and, above all, on the operator’s health.
• Much more silent and therefore more pleasant to use than a petrol engine.

6000-7000 rpm speed

The machine is equipped with:

* The batteries can be used:

• In series
• The voltages (V) are summed up
• The capacity (Ah) IS NOT summed up
• In parallel
• The voltages (V) ARE NOT summed up
• The capacity (Ah) is summed up

LONGER LIFE: up to 3 times higher than the nickel–cadmium batteries, reducing the need to recharge during long periods of use.
Ideal for medium-large gardens.

FULL CHARGE FOR THE ENTIRE BATTERY LIFE: the charge of the lithium-ion batteries does not fade. Unlike nickel-cadmium batteries, which power gradually decreases, the cells of lithium-ion batteries maintain constant power throughout the entire cycle. The same charge for the entire cycle without reducing the motor speed. The battery runs at full
power until its complete exhaustion.

LONG BATTERY LIFE: Lithium-ion batteries hold their power for a longer time than nickel-cadmium ones, with a number of charges 3-4 times greater and longer storage times
with lower battery loss. Lithium-ion batteries are rechargeable up to 2000 times!

LIGHTWEIGHT: Lithium-ion batteries have the best power-to-weight ratio. They weigh 1/3 of nickel-cadmium ones.

ENVIRONMENTALLY FRIENDLY: Lithium-ion battery-powered tools are recyclable and are produced without heavy metals.

NO MEMORY EFFECT: Lithium-ion batteries can be recharged at any time without negative memory effect. Indeed, they provide maximum power even after hundreds of charge cycles.
Few minutes of charge are enough to complete the work.

LOW DISCHARGE RATE: low discharge rate (up to 5 times lower than nickel-cadmium batteries) so your machine will be ready to use even after months of storage.

BATTERY CHARGER: battery chargers for lithium-ion batteries allow reducing the energy consumption by an average of 35%.

The professional head is equipped with Tap ‘n go technology for fast line loading and working without interruptions.

The adjustment of the line length is automatic thanks to the counter-blade on the stone guard.

Machine equipped with adjustable speed, to provide greater control on the ground.

Cutting width: 38 cm

Line diameter: 2.4 mm

The aluminium shaft of the brush cutter has an adjustable loop handle that allows you to change the position and balance of the tools and, in addition, a shoulder harness which offers additional comfort and control.

The machine weighs 4.4kg WITHOUT battery

The controls are simple and user-friendly, with starting trigger and safety system

Focus on the double speed