Benassi MC2300H Reverso Two-wheel Tractor with Honda GP160 Petrol Engine

Self-propelled two-wheel tractor powered by a HONDA 4-stroke engine and driven by large treaded tractor wheels. The wheels are attached to a gear transmission with gears in oil bath.

The 48 cm tiller accessory (supplied as standard) is equipped with 4 elements with 4 hoes each (16 hoes in total).

The two-wheel tractor is driven by a 2-gear gearbox (1 forward + 1 reverse).

Multi tool machine with quick hitch and reversible steering handles, that provides for the possible application of other accessories on request to exploit the full potential of the machine.

BENASSI two-wheel tractors are Made in Italy products, a guarantee of reliability, quality of construction and materials.

Two-wheel tractors are intended for working on soft not-stony soils. They do not dig very deep into the ground, but have the ability to break up the soil very finely, more than any garden tiller. For this reason, they are specifically designed for working in vegetable gardens in all types of crops, or, in any case, on soft soils that have already been ploughed and frequently tilled.

On the other hand, in case of particularly hard (or even never worked) or fairly stony ground, or with sloping terrain, we recommend to move towards a garden tiller, which is better suited to working in these soil conditions.

The machine has been upgraded with a new, even more sturdy tiller!

Thanks to the new construction profile, the machine structure is even more resistant.

Sickle bar with
dual-blade action which allows removing overgrown grass and weeds.

Adjustable back furrower

The Honda GP 160 is light and high performing, it is suitable for works where a certain amount of power is required, also thanks to the 163 cc of cubic capacity.

Features:

4-stroke engine with "OHV” overhead valve technology - horizontal shaft, otto cycle, 4-stroke, 25° inclined cast iron cylinder and forced air cooling.

Nowadays, the great majority of agricultural and gardening equipment available on the market mounts unbranded (or with unknown brand) engines made in China.

 
The engine is PROVIDED WITHOUT OIL.
Please carefully read the instruction manual before starting the unit.

Remember that it is always a good idea to:
1) check the engine oil level
2) put oil in the filter because it is not present (in case of filter in oil bath)
3) carefully read the instructions manual before carrying out any oil check and topping up operation (the manufacturer can modify the supply modalities specified in the two upper points without any prior notice).

Nominal Power: 5.5 Hp

* The correct term would be "Commercial” Power, meaning the standard definition used until a few years ago by all well-known engine manufacturers. This technical detail is even more widespread and advertised in the leading commercial channels, although it is a matter that it is higher than the actual power.

Rated power: 4.8 Hp

* It corresponds to the real power expressed cutting organ in working phase. This is the power indicated as official in the engine instructions manual.

The two-wheel tractor is driven by a 2-gear gearbox (1 forward + 1 reverse).

They can be engaged by means of the lever placed under the steering handles.

The gearbox and transmission are among the parts most prone to failure and wear.

This is why in this machine, these components are entirely made of gears in oil bath and not equipped with drive belt, thus giving the equipment very high strength and durability.

Very sturdy and reliable.

Focus on the reversible steering handles where all the main controls are placed.

Focus on:

• gearbox and power take-off hitch engagement levers.
• Silver lever: wheels unlocking lever
• Red lever: engine stop lever
• Silver lever: Clutch lever

Focus on the height adjustment of the steering handles.

Reversible or side-adjustable steering handles .

Focus on the fixing and rotation system of the steering handles support by means of the special locking lever.

Throttle lever

Tiller working width: 48 cm

External hood made of sheet steel.

Tiller equipped with 4 elements, each with 4 hoes

Tiller diameter: 26 cm

The stake can be adjusted in various positions, thus determining the working depth of the tiller(remember that all the two-wheel tractors on the market tend to grind the soil very finely, but they carry out fairly superficial work, i.e. they feature a medium-low working depth in the soil).

Focus of the quick hitch between the tiller and the machine body.

Another great advantage of the belt drive is the tiller engagement and disengagement lever (red lever at the top). This innovative two-wheel tractor allows it to be activated only when necessary, e.g. where work is to be done, and then deactivate whenever desired. For example, it allows movements to be made using traction and with the tiller stationary.

Professional large size treaded pneumatic wheels 13.5.00-6"

Equipped with locking/unlocking system on the steering handles. In this way, the wheels go into neutral or regain traction.