Electric Pumps for Garden and Home Use Annovi Reverberi

Annovi Reverberi electric pumps allow you to draw and transfer clean water for irrigating vegetable gardens and gardens or supplying compatible household utilities. The Italian company, founded in 1958 by Corrado Reverberi, began its activity with pumps for agriculture and over time expanded its range to industrial applications and cleaning machines. The AR Blue Clean line applies this experience to self-priming surface pumps, with compact models for tanks, cisterns and wells within the limits specified in the technical data sheet. The AgriEuro catalogue distinguishes between two product families, useful for choosing between direct irrigation and water distribution at a stable pressure:

• Annovi Reverberi self-priming garden pumps: they draw clean water from a source located below the installation level and transfer it to the delivery point. They are suitable for watering, irrigating small green areas or transferring water between tanks, in compliance with the flow rate, head and suction depth of the model;
• Annovi Reverberi pressure booster pumps for domestic use: they integrate a pressurised tank and an automatic start and stop system. They can serve irrigation systems, sanitary fixtures and household appliances compatible with service water from suitable reserves, while maintaining regular pressure;

On AgriEuro, you can select Annovi Reverberi electric pumps according to their technical features, making it easier to identify the model best suited to the system and intended type of use. Maximum values must be compared with height differences, pipe length and diameter, pressure losses and the water demand of the connected outlets.

• Power consumption: indicates the electrical motor's power absorption and, within the range offered, distinguishes models with different power ratings. It should not be assessed on its own, as the choice depends on the operating point determined by flow rate and head;
• Maximum flow rate: indicates the amount of water that can be transferred per unit of time under favourable conditions. The actual flow rate decreases as head, distance and system resistance increase;
• Maximum head: represents the theoretical height to which the pump can push water. Sizing must take into account both the height difference and the losses caused by pipes, bends, valves and delivery devices;
• Suction depth: defines the maximum permitted height difference between the surface pump and the water being drawn. A properly sealed line, correct priming and a suitable foot valve help maintain suction;
• Pump head materials: some models use plastic components, while others feature a stainless-steel pump head. The configuration should be chosen according to frequency of use, installation conditions and the information given on the individual product data sheet;
• Integrated pressure tank: models equipped with a tank store pressurised water and reduce the number of starts for small water demands. The pressure gauge, pressure switch and tank work together to maintain pressure within the thresholds specified by the system;

Entry-level and hobby models meet the needs of occasional irrigation, small water transfers and non-intensive domestic activities. Semi-professional versions are suitable for more frequent use, provided that flow rate, head and operating times remain within the product specifications.

The Annovi Reverberi electric pumps available on AgriEuro are divided into self-priming garden pumps and pressure booster pumps for domestic use. Both operate outside the water and draw clean water from sources compatible with the manufacturer's requirements. The main difference is the presence of the pressurised tank and automatic control system in pressure booster units.

Annovi Reverberi self-priming garden pumps are surface electric pumps designed to draw clean water from cisterns, collection tanks or shallow wells. Their compact structure and handle make them easy to move between different areas of the garden. Models with a stainless-steel pump head offer a configuration suitable for users looking for greater protection of components exposed to water flow. These pumps can supply watering activities, small properly sized systems or water transfer operations. Before starting, the pump body must be filled as indicated in the manual and the suction pipe must be checked for leaks. A line that is not airtight can draw in air and interrupt the flow. Compatibility with sprinklers and complex systems does not depend on power alone: calculations are required for flow rate, head, pressure, pipe diameter and pressure losses.

• Vegetable garden and garden irrigation: the pump draws clean water from a reserve and sends it to a hose or delivery device. The number of active outlets must respect the flow rate and pressure available at the operating point;
• Rainwater recovery: water collected in a cistern can be used for compatible activities, reducing the use of drinking water. The suction line must be protected from sediment and foreign bodies in accordance with the instructions in the manual;
• Transfer between tanks: self-priming models can move clean water between containers positioned at different heights. Distance, height difference and pipe cross-section affect the actual flow rate;

Annovi Reverberi pressure booster pumps for domestic use combine a self-priming pump with a pressurised tank, pressure gauge and control devices. The system starts the motor when the pressure drops below the set threshold and stops it when the specified upper value is reached. This configuration provides more regular water distribution and limits starts caused by small withdrawals. Applications include automatic irrigation, sanitary fixtures and household appliances compatible with service water from tanks, cisterns or wells. The water and system must comply with the conditions specified by the manufacturer, including temperature, liquid quality and connections. Tank volume, flow rate, head and required pressure must be assessed together. Correct sizing prevents excessively frequent cycles and keeps the system consistent with the number of outlets served.

• Stable pressure: the tank stores a quantity of pressurised water and makes it available between one pump start and the next. The pressure switch and pressure gauge control operation within the thresholds specified for the model;
• Automatic start and stop: the pump starts in response to demand from the system and stops when the set pressure is reached. The system requires correct connections and periodic checks of the tank and control devices;
• Domestic water supply: service water can supply compatible outlets without using drinking water for activities that do not require it. The intended use of the water, source quality and system compliance must be checked before installation;

Buying an Annovi Reverberi electric pump from AgriEuro allows you to consult detailed technical data sheets and compare the available models. Dedicated services support the order, maintenance and any requests made after purchase.

• Fast and free shipping: delivery is organised directly from AgriEuro logistics centres, with up-to-date information on model availability. The service allows the electric pump to be delivered to the indicated address without the shipping costs normally applied to these items;
• Possibility to order spare parts: after purchase, the spare parts diagram associated with the product makes it possible to identify and request available components. This support simplifies maintenance work and helps preserve the machine's efficiency over time;
• After-sales support: the AgriEuro service offers attentive and personalised support for technical requests, spare parts and scheduled interventions. The network includes the central workshop and the service centres indicated for the applicable procedures;

Buy the Annovi Reverberi electric pump best suited to irrigation or domestic water supply from AgriEuro.

The choice starts with the required flow rate, total head and suction depth. You must then consider distance, pipe diameter, pressure losses and the pressure required by the sprinklers, comparing these data with the model's performance curve and technical data sheet.

A self-priming pump transfers water from a source located below the installation level; a pressure booster unit adds a pressurised tank and automatic controls. A pressure booster system is therefore more suitable when the installation requires stable pressure and automatic starting when outlets are opened.

The flow rate indicates the amount of water transferred per unit of time; the head measures the energy available to overcome height differences and circuit resistance. The two values are related: when the required head increases, the available flow rate tends to decrease.

Models in this category can draw clean water from tanks, cisterns and wells within the declared suction depth. The source must be compatible with the product and the suction line must comply with requirements concerning sealing, diameter, foot valve and any necessary filtration.

Yes, the pump body must be primed according to the manual before first use and after any draining that allows air to enter. The self-priming function facilitates restoration of the flow, but does not permit dry running.

This is possible only when the model meets the flow rate and pressure required by the entire circuit. Systems with multiple sprinklers, zones, long pipelines or significant height differences require technical sizing that takes nozzles, valves, diameters and pressure losses into account.

The tank contains a reserve of pressurised water that covers small withdrawals and reduces the frequency of motor starts. The expansion vessel works together with the pressure switch and pressure gauge, so membrane pressure and component condition require periodic checks.

Yes, rainwater collected in a suitable tank can be used for irrigation and other compatible utilities. Contaminants, sediments and foreign bodies must be avoided by applying the required filtration and keeping circuits separate in accordance with system regulations.

Frequent starts may be caused by leaks, incorrect tank pressure, a worn membrane or pressure switch adjustment. The system should be switched off and inspection and restoration entrusted to qualified personnel, following the model's manual.

Maintenance includes checking fittings, line sealing, cleaning filters and protecting the pump against frost, moisture and dry running. On pressure booster units, the tank, pressure, pressure gauge and pressure switch must also be checked; internal servicing must be carried out by qualified personnel.