Alpina AT3 98 A Riding-on mower - side discharge - Alpina ST 350 352 cc engine

Alpina AT3 98 A riding-on mower with side discharge.

Alpina AT3 98 A riding-on mowers with side discharge are ideal for mowing in large spaces without too many obstacles. The side discharge is really helpful in case of tall grass and makes work faster.

Thanks to the 98 cm 2-blade cutting deck, the performance is excellent, suitable for large surfaces! Equipped with large pneumatic wheels with excellent steering radius that allow very easy handling in the smallest spaces.

This model features a new design and a powerful, reliable engine. The 352 cc Alpina ST 350 engine develops 8.8 HP at 2800 rpm.

1- SIDE DISCHARGE (standard supplied): the most traditional cutting system which allows cutting the grass and leaving it on the lawn. This system is recommended for mowing large-sized areas and for those who have to cut over-grown grass, for which the mulching or the grass collector system are no longer efficient.

2- MULCHING (optional): this system allows shredding the grass really finely, so that it looks as if it has been collected. This eliminates the problem of its disposal (reducing any effort and shortening the time-saving). Moreover, grass clippings will break down into nutrients and water for the lawn (grass is 80% water) and will thus ensure a perfectly balanced biological cycle. However, please remember that, to ensure the greatest mulching results, the lawn must be watered and the grass needs to be cut often. The conversion from one system to another is easy.

The Alpina ST 350 engine is high-performance, suitable for jobs which require high power.

Single-cylinder, 352 cc, 4-stroke latest-generation engine with OHVoverhead valve shaft.

It is a heavy-duty engine which guarantees reliability and durability. This is one of the most famous engines around the world, both among riding-on mowers and the greenery and agricultural field in general.

It develops a rated power of 8.8 Hp at 2800 rpm.

The engine is equipped with a starter motor and the ignition takes place with the key.

The engine is connected to a sturdy mechanical transmission with gears: 5 forward and 1 reverse

Nominal Power: 11.5 HP
The correct term would be "Commercial” Power, meaning the standard definition used until a few years ago by all well-known engine manufacturers.

* This technical feature is the one indicated in the main sales channels, even if it is higher than the real power of the engine.

Effective power: 8.8 HP (a rotation speed of 2800 rpm)
It refers to the real power of the engine. This is the power indicated as official in the engine instructions manual.

* This technical feature may vary from an engine model to another according to the rotation speed provided by the manufacturer.

The Alpina riding-on mower features a 2-blade cutting deck.

The riding-on mower is equipped with mulching blades

98 cm cutting deck width.

The cutting deck of the riding-on mower is tilting: it adapts easily to the unevenness of the ground (as long as they are not excessive).

Electromagnetic blade engagement controlled through the red button placed to the right of the steering wheel. This system avoids manual engagement via the classic lever featured by many riding-on mowers, and works thanks to an electromagnetic clutch that allows easy and fast engagement of the blades

The cutting height of the cutting deck is adjustable using a lever.

The cutting positions available are7 and they vary from 80 mm to 25 mm.

The cutting deck is equipped with 2 non-marking wheels and washing joint.

The Alpina riding-on mower controls and adjustments are easy and intuitive.

• Speed regulator
• Ignition lock with key
• Brake pedal
• Cutting height adjustment lever
• Electromagnetic blade engagement with a yellow button located to the right of the steering wheel
• Gear lever

Other features of the Alpina riding-on mower:

• Opening engine bonnet to allow cleaning and maintenance operations
• Comfortable adjustable seat for maximum comfort during use.
• Ergonomic steering wheel
• Sturdy front bull bar: it avoids frontal impacts and protects the machine.
• 18 x 8.5-8 large rear wheels
• 13 X 5.00-6 front wheels
• Pivoting front wheel axle: provides excellent balance, stability and comfort even on uneven terrain.
• Cup holder
• Focus on the washing joint of the cutting deck.
• Non-marking wheels of the cutting deck.
• Focus on the front halogen headlights
• Storage compartment