Tractor mounted unit for medium and big size crops spraying.
Full emptying 600 lt polyethylene tank.
STURDY HOT ZINC-PLATED STEEL BEAMS frame
Original Comet 3 ways GCP pressure adjustment unit
It has three output, each one provided with faucet, for different uses.
Usually the two side output are used to link a pair of spraying guns for orchards or stainless steel boom bars for vineyards etc…
The central hole is in general used for the hose with a lance or a gun or for the hose reel linkage.
The pressure adjustment unit can also be transferred into the tractor’s cockpit, by purchasing the distance kit that lengthen the hoses for the distance operation.
Heavy hot zinc-plated steel beams + lifter’s 3 point linkage with pins.
This sprayer is provided with two special vertical bars, specifically indicated for any spraying accessory available on market enabling also the desired height.
Also a universal plate is present, with two curved supports, useful for any tool housing.
The two curved bars can be set both vertically and horizontally to the plate.
They are also provided with many holes suitable for all the housing needs.
Plate is very versatile as it can slide up and down along the two vertical bars by only unfastening the bolts
Polyethylene tank, fully emptying, 200 lt capacity.
Additional tank for the operator’s hand washing.
Circuit washing tank for the tank’s inner, the hoses, and tools washing at the end of the job. To activate it, is necessary to open the cartridge filter’s faucet
Outer degree scale level reader particular.
Hydraulic agitator, pfor the continuous solution mixing inside the tank, provided with a high pressure jet pointed towards the tank's center.
Outer suction filter provided with self filling device (The hose needed for the self filling must be purchased separately and it is proposed in the related Products Section)
Inner filter for the residuals and dirt filtering.
Faucet for the full tank emptying.
Inner agitator faucet, directly connected to the pump.
Big metal filter
5 mt rubber hose for any additional tool linkage (hose reel, bars, praying gun) to be connected with the pressure adjustment unit.
Accessories: black joint to be connected to outer lower filter to activate the self-replenishment function + different adapters for the pressure adjustment units + faucet, to be assembled on the hand washing tank.