Mounted weed sprayer for medium and large crops.
Equipped with a modern low pressure BP 135 COMET pump, specific for weeding treatments.
Polyethylene full-emptying tank, with a capacity of 600
HEAVY PROFILE hot galvanised steel frame.
For weeding treatments and liquid fertilization with solutions.
The parts directly touching the liquid are made of plastic and plastic-coated aluminium, resistant to chemicals used in agriculture.
3-membrane Desmopan® configuration
Plastic heads and manifolds (Nylon)
Flow rate: 132.0 l/min
Pressure: 20.0 bar
This mounted weed sprayer has a six-way constant pressure volumetric distributor.
CONSTANT PRESSURE = maintains a perfectly constant pressure on each of the 6 outlets, so that every nozzle will deliver the same amount of liquid.
Equipped with pressure control knob and Bypass lever that opens and closes the inflow of liquid to the bar.
Equipped with a special telescope arm with double adjustment, both horizontally and vertically.
This makes it possible to bring the unit closer to the tractor cabin, so you can operate the various controls directly from the driver's seat by simply turning around, without getting off the tractor.
-Vertical telescope regulator to adjust the height
-Horizontal telescope regulator to adjust the distance from the operator
Polyethylene full-emptying tank, capacity (L) 600.
Additional tank for hand washing
Circuit-washing tank (to wash the inside of the tank, hoses and all the equipment at the end of the treatment, before storage). To activate it, simply open the tap in the cartridge filter.
Focus on the external level with graduated scale.
Hydraulic agitator, to constantly mix the solution within the tank. It has a high-pressure jet in the centre of the tank.
External suction filter equipped with self-filling system (the hose to fill the tank must be purchased separately, you can find it in the related accessories section).