Makita UX01G - Battery-powered Multifunction Brush Cutter - 40V - 2.5Ah

This Makita UX01GZ battery-powered brush cutter uses the convenience of lithium batteries to replace the electric cable without giving up its advantages.

It is a multi tool battery-powered brush cutter, silent, lightweight and easy to use.

There are several attachments which can be mounted on the machine body, making this machine extremely versatile.

It is equipped with a brushless motor with AFT technology, which switches off the motor if the cutting unit suddenly stops.

The brush cutter, hedge trimmer, pruner head and extension pole are INCLUDED.

The quick release allows you to switch attachment quickly and easily.

The product is equipped with a 40 V 2.5Ah battery and a DC40RA battery charger, which can charge one battery at a time.

LITHIUM-ION BATTERY AND BATTERY CHARGER INCLUDED

Batteries equipped with quick release: the battery can be easily detached and pulled out from the machine by pressing the quick release button.

Voltage: 40V
Amperage: 2.5Ah

The practical battery can be recharged at any time, no memory effect (it does not tend to run out after many refills), always a great power.

User-friendly battery charger supplied on standard kit (it can be connected to your home mains as the one of a standard smartphone).

The batteries are connected to the battery charger through the quick release, in the same way as it is connected to the machine.

You can also purchase additional batteries in order to ensure prolonged running time.

Therefore, you only need one battery and one battery charger in order to be able to use the full range of equipment offered by Makita.

LONGER LIFE: up to 3 times higher than the nickel–cadmium batteries, reducing the need to recharge during long periods of use.
Ideal for medium-large gardens.

FULL CHARGE FOR THE ENTIRE BATTERY LIFE: the charge of the lithium-ion batteries does not fade. Unlike nickel-cadmium batteries, which power gradually decreases, the cells of lithium-ion batteries maintain constant power throughout the entire cycle. The same charge for the entire cycle without reducing the motor speed. The battery runs at full
power until its complete exhaustion.

LONG BATTERY LIFE: lithium-ion batteries have 3-4 times the number of recharges compared to conventional nickel-cadmium batteries, while offering longer storage times and
less loss of charge. Lithium batteries can be recharged up to 2000 times!

LIGHTWEIGHT: Lithium-ion batteries have the best power-to-weight ratio. On average, they weigh on average 1/3 of nickel-cadmium batteries.

ENVIRONMENTALLY FRIENDLY: Lithium-ion battery-powered tools are recyclable and are produced without heavy metals.

NO MEMORY EFFECT: Lithium-ion batteries can be recharged at any time without negative memory effect. Indeed, they provide maximum power even after hundreds of charge cycles.
Few minutes of charge are enough to complete the work.

LOW DISCHARGE RATE: low discharge rate (up to 5 times lower than nickel-cadmium batteries) so your machine will be ready to use even after months of storage.

BATTERY CHARGER: battery chargers for lithium-ion batteries allow reducing the energy consumption by an average of 35%.

Main advantages of the electric motor:

• More reliable than a petrol engine. It does not have a spark plug, filters, oil dipstick, carburettors or any component that may cause problems.
• Maintenance-free
• Much lighter
• Lower consumption and drastically reduced operating costs compared to petrol engines (great results with minimum power required). No need to constantly provide fuel (which should always be fresh).
• Zero vibrations. Instead, almost all engine-powered machines which are not equipped with an anti-vibration system on steel springs have very strong vibrations, making work quite unpleasant.
• Zero smoke emission, zero impact on the environment and, above all, on the operator’s health.
• Much more silent and therefore more pleasant to use than a petrol engine.

The transmission shaft of the brush cutter has a diameter of 24 mm and it is made of aluminium. This makes it very durable while maintaining a low weight.

Ergonomic loop handle.

The controls are simple and intuitive, with 3 electronic speeds.

Focus on the quick release.

The accessory can be assembled and removed from the machine body very quickly thanks to the quick-release coupling.

The Tap'n Go line head allows to lengthen the line pressing it against the ground during rotation.

The stone guard is equipped with a counter blade for the adjustment of the line, and can also be set to operate with steel blades by simply releasing two tabs.

(STEEL BLADES NOT INCLUDED)

This hedge trimmer accessory, suitable for UX01GZ hedge trimmer, is the perfect tool to prune high and deep hedges

It is equipped with a 53 cm cutting blade.

Focus on the 53 cm bar

It is easy to mount on the UX01GZ hedge trimmer thanks to its quick release.

It can be easily used by any operator and it rotates in 12 positions, which makes it very versatile.

The hedge trimmer is adjustable according to the working needs.

The bar cover made of plastic is included.

This pruner accessory, which can be attached to the Makita UX01GZ, is the ideal product for pruning.

It features a 30 cm bar.

Semi-transparent tank to quickly check the lubricating oil level without removing the cap.

It can be easily attached to the brush cutter thanks to its quick coupling.

The bar cover made of plastic is included.

The extension pole allows the pruner to reach a total length of 3.28 m, allowing it to cut even the highest branches.

The extension pole is also equipped with quick coupling.

The machine is equipped with:

* The batteries can be used

• In series
• The voltages (V) are summed up
• The capacity (Ah) IS NOT summed up
• In parallel
• The voltages (V) ARE NOT summed up
• The capacity (Ah) is summed up