Makita UX01G - Battery-powered Brush Cutter - 40V - 2.5Ah

This Makita UX01GZ battery-powered brush cutter uses the convenience of lithium batteries to replace the electric cable without giving up its advantages.

It is a multi-tool battery-powered brush cutter, very silent, lightweight and easy to use.

It is equipped with a brushless motor characterized by AFT technology, which turns off the motor if the cutting head suddenly stops.

The brush cutter head is the only attachment INCLUDED in the product.

The quick coupling allows the user to switch attachment very easily and quickly.

The product comes equipped with one 40 V 2.5Ah battery and a DC40RA quick battery charger that can charge one battery at a time.

INCLUDED WITH THE PURCHASE, A LITHIUM BATTERY AND ITS CHARGER

Battery equipped with quick release: the battery can be easily removed from the machine by pressing the quick release button.

Voltage: 40 V
Amperage: 2.5 Ah

The convenient battery can be recharged at any time, without memory effect (it does not tend to run out after many charges), always providing excellent power.

Convenient battery charger supplied (it connects to the home current as a mobile phone charger).

The batteries are connected to the battery charger through the quick release, in the same way as it is connected to the machine.

You can also purchase additional batteries in order to ensure prolonged running time.

Therefore, you only need one battery and one battery charger in order to be able to use the full range of equipment offered by Makita.

LONGER LIFE: up to 3 times higher than the nickel–cadmium batteries, reducing the need to recharge during long periods of use.
Ideal for medium to large gardens.

FULL CHARGE FOR THE ENTIRE BATTERY LIFE: the charge of the lithium-ion batteries does not fade. Unlike nickel-cadmium batteries, whose power gradually decreases, lithium-ion battery cells maintain constant power throughout the cycle. The same charge for the entire cycle without reducing the motor speed. The battery is running at full
power until its complete exhaustion.

LONGER CHARGE LIFE: lithium-ion batteries have 3-4 times the number of recharges compared to conventional nickel-cadmium batteries, while offering longer storage times and
less loss of charge. Lithium batteries are rechargeable up to 2000 times!

LIGHTWEIGHT: lithium-ion batteries offer the best power-to-weight ratio. On average, they weigh 1/3 of nickel-cadmium batteries.

ENVIRONMENTALLY-FRIENDLY: lithium battery-powered tools are recyclable and are produced without heavy metals.

NO MEMORY EFFECT: lithium batteries can be recharged at any time without negative memory effect. Indeed, they provide maximum power even after hundreds of charge cycles.
Few minutes of charge are enough to complete the operations.

LOW DISCHARGE RATE: low rate of charge loss (up to 5 times lower than nickel-cadmium batteries) so your tool will be ready to use even after months of storage.

BATTERY CHARGER: lithium-ion batteries chargers reduce energy consumption by an average of 35%. Heavy-duty long-lasting air filter

Advantages of the electric motor:

• More reliable than a petrol engine. It does not have spark plug, filters, oil dipstick, carburetors, any component that may cause problems.
• Maintenance-free
• Much lighter
• Lower consumption and drastically reduced operating costs compared to petrol engines (great cutting results with minimum power required). No need to constantly provide fuel (which should always be fresh).
• Zero vibrations. Instead, almost all engine-powered machines which are not equipped with an anti-vibration system on steel springs have very strong vibrations, making the work quite unpleasant.
• Zero smoke emission, zero impact on the environment and, above all, on the operator’s health.
• Much quieter and therefore pleasant to use than a petrol engine.

The transmission shaft of the brush cutter has a diameter of 24 mm and it is made of aluminium. This makes it very resistant while maintaining a low weight.

Ergonomic loop handle

User-friendly controls with 3 electronic speeds.

Focus on the quick coupling.

The attachment can be quickly fitted and removed from the machine body thanks to the quick coupling.

The brush cutter is equipped with Tap'N Go head, which allows you to reload the line by pressing the head against the ground during rotation.

The stone guard is equipped with a counter-blade for blade adjustment, it is also suitable to operate with steel blades by simply releasing two tabs

(STEEL BLADES NOT INCLUDED)