Makita UR013GZ01 - Cordless brushcutter - 40V - WITHOUT BATTERIES AND CHARGERS

The Makita UR013GZ01 40Vmax brush cutter is a powerful and versatile tool, designed to tackle mowing jobs in difficult terrain such as uneven trails, descents, areas near waterways, roads and cycle paths.

One of its strengths is ergonomics, which allows the user to work comfortably for prolonged periods, in any environmental condition.

This is made possible thanks to electronic management that ensures security and adaptability to different operational needs.

Among its main functions, the brush cutter includes an "electric brake" and an automatic motor stop system in case of accidental blockage of the head, thus increasing safety for the operator.

In addition, it is possible to adjust the motor speed according to the type of work to be carried out, ensuring both safety and a high level of comfort and productivity.

The brushless engine (BL) of this brush cutter offers high performance, with powers up to 1500W.

The speed can be adjusted between 3500–6700 rpm thanks to a special lever, which the operator can use to adapt to various working conditions.

The brush cutter also offers the possibility of using a cutting wire with a diameter of 45 cm, ensuring a large working area.

In terms of performance, this model is comparable to a brush cutter with a 35cc endothermic engine, but with the significant advantage of producing zero emissions, making it a greener option.

Another notable feature is the ability to adjust the direction of rotation of the head, left or right, depending on the specific cutting needs or conditions.

Note that the brush cutter comes without batteries and chargers, so these components must be purchased separately.

With this machine, you have the following advantages:

• No power cables needed
• Zero emissions
• Exceptional quietness
• Great manoeuvrability and comfort

Technical features:

• XGT Platform
• Nominal battery voltage 40 V
• Battery type (Ni-Cd / Ni-MH / Li-ion) Li-ion
• Max. output power 1500 W
• No-Load Speed 3500–6700 min⁻¹
• Cutting width 255-450 mm
• Vibration level (3-axis) ≤ 2.5 m/s²
• Shaft threading M10 x 1.25 LH
• Product dimensions 1914 x 330 x 304 mm
• Brushless engine

BATTERY AND BATTERY CHARGER NOT INCLUDED

LONGER LIFE: up to 3 times higher than nickel–cadmium batteries, reducing the need to recharge during long periods of use.
Ideal for medium-large gardens.

FULL CHARGE FOR THE ENTIRE BATTERY LIFE: the charge of the lithium-ion batteries does not fade. Unlike nickel-cadmium batteries, which power gradually decreases, lithium-ion batteries, cells maintain constant power throughout the entire cycle. The same charge for the entire cycle without reducing the motor speed. The battery is running at full power until its complete exhaustion.

LONGER CHARGE LIFE: lithium-Ion batteries last 3–4 times longer than traditional Nickel-Cadmium batteries and their power storage lasts longer, so they lose less power. Lithium-ion batteries can be recharged up to 2000 times!

LIGHTWEIGHT: Lithium-ion batteries have the best power-weight rate. They weight 1/3 of nickel-cadmium ones.

ENVIRONMENTALLY-FRIENDLY: Lithium-ion battery-powered tools are recyclable and are produced without heavy metals.

NO MEMORY EFFECT: lithium-ion batteries can be recharged at any time without negative memory effect. Indeed, they don't fail to provide maximum power even after hundreds of charge cycles.
Few minutes of charge are enough to complete the work.

LOW DISCHARGE RATE: low loss of charge rate (up to 5 times lower than nickel-cadmium batteries) so your machine will be ready to use even after months of storage.

BATTERY CHARGER: lithium-ion batteries chargers allow reducing energy consumption by an average of 35%.

BATTERY AND BATTERY CHARGER NOT INCLUDED

Advantages of the electric motor:

• More reliable than a petrol model. No spark plug, filters, oil dipstick, carburettors, etc. or components which can cause problems.
• Zero maintenance, for the same reasons given before.
• Lighter
• Lower consumption and drastically reduced operating costs compared to internal combustion engines (great results with minimal power required). In addition, the Operator won’t have to buy the fuel (that it should always be fresh).
• Zero vibrations, thanks to the electric motor. Instead, almost all engine-powered machines, which are not equipped with an anti-vibration system on steel springs, have a very high degree of vibrations, making the work quite unpleasant.
• Zero fumes, zero impact on the environment and, above all, zero repercussions on the Operator’s health.
• Quieter and therefore pleasant to use than an internal combustion engine.

In addition, this brush cutter in particular is equipped with the Active System technology, a security system that instantly stop the rotation of the engine and transmission as soon as it will impact a solid object while using the steel blade. This will help prevent damage to the machine and especially the operator.

BATTERY AND BATTERY CHARGER NOT INCLUDED

The "tap & go" brush cutter head is an accessory designed to greatly improve efficiency and ease of use during mowing work.

It can hold up to 2.4 mm x 3 meters, thus offering excellent durability and reducing the need for frequent replacements.

This is especially useful in long-lasting work or on soils that require more intensive cutting.

The "tap & go" design of the head is particularly appreciated for its ease of use.

With a simple touch of the ground, the user can release more wire, thus avoiding frequent interruptions of work to manually adjust the length of the wire.

This feature makes the operation smoother and less strenuous, especially during prolonged work sessions.

A head with retractable plastic blades is also included in the brush cutter

The "Retractable Plastic Blade Brush Cutter Head" is an accessory designed for maximum efficiency and safety.

These blades, made of durable plastic material, retract automatically when not in use, reducing the risk of damage or injury and facilitating the storage of the equipment.

The stone guard also adapts to the steel blade without the need to replace it.

In fact, you only have to unhook the lower part of the axle guard to be able to use it easily and safely.

BATTERY AND BATTERY CHARGER NOT INCLUDED

The transmission shaft of the brush cutter features a diameter of 24 mm and is made of aluminium. This makes it very durable while maintaining a low weight.

Double handle

The controls are convenient, simple and intuitive, with speed adjustment.

BATTERY AND BATTERY CHARGER NOT INCLUDED