Makita DUX60Z 36V Multi-tool Battery-powered Pruner on 108 cm Extension Pole - Batterie 2x18 V 3Ah

This Makita DUX60Z multifunctional battery-powered pruner uses the convenience of lithium-ion batteries to replace the electric cable without giving up its advantages.

It is a multifunctional battery-powered pruner, very silent, lightweight and easy to use.

The product comes equipped with 2 18v 3h batteries and a SINGLE battery charger, which can charge one battery at a time.

The accessories which can be mounted on the machine body are many and of several kinds, allowing this machine to be extremely versatile.

The pruner head and extension pole are INCLUDED.

The quick release allows the user to switch from an accessory to another with extreme ease and rapidity.

The pruner with extension pole weighs 7.5kg

The pruner without extension pole weighs 6.4kg

2 LITHIUM-ION BATTERIES AND BATTERY CHARGER INCLUDED

Battery equipped with quick release: the battery can be easily detached and pulled out from the machine by pressing the quick release button.

Voltage: 18V
Amperage: 3Ah

The practical battery can be recharged at any time, no memory effect (it does not tend to run out after many refills), always a great power.

User-friendly battery charger supplied on standard kit (it can be connected to your home mains as the one of a standard smartphone).

The batteries are connected to the battery charger through the quick release, in the same way as it is connected to the pruner.

You can also purchase additional batteries in order to ensure prolonged an intensive running time.

Therefore, you only need one battery and one battery charger in order to be able to use the full range of equipment offered by Makita.

LONGER LIFE: lasts up to 3 times longer than traditional Nickel-Cadmium batteries so it can be used for long periods without recharging. Perfect for medium-large gardens.

FULL CHARGE FOR THE ENTIRE BATTERY DURATION: the Lithium-Ion battery charge does not decrease. Nickel-cadmium batteries gradually lose power. Lithium battery cells have a constant power level during the whole cycle. Thus, the battery charge is constant from the beginning until the end and the motor rpm rate does not decrease. The battery provides full power before it dies completely.

LONG CHARGE DURATION: Lithium-Ion batteries last 3-4 times longer than traditional Nickel-Cadmium batteries and their power storage lasts longer so they lose less power. Lithium batteries allow up to 2.000 charge cycles!

REDUCED WEIGHT: Lithium batteries have the best power-weight ratio. A lithium battery weighs 1/3 of a nickel-cadmium battery on average.

ECO-FRIENDLY: Lithium battery-powered tools can be recycled and they are not made with heavy metals.

ZERO MEMORY EFFECT: Lithium batteries can be recharged any time without the negative memory effect. They offer maximum power after hundreds of charge cycles. Charging the battery for a few minutes will supply enough power to get the work done.

LOW POWER LOSS RATE: The power loss rate is up to 5 times lower than that of Nickel-Cadmium batteries so this tool will be ready for use even after very long breaks.

BATTERY CHARGER: Lithium battery chargers allow reducing power consumption by 35% on average.

Main advantages of the electric motor:

• More reliable of a petrol engine. It does not have a spark plug, filters, oil dipstick, carburetors, any component that may cause problems.
• Zero maintenance
• Much lighter
• Lower consumption and drastically reduced operating costs compared to petrol engine models (great cutting results with minimal power required). Moreover, there is no need for the operator to provide fuel (the fuel should always be fresh).
• Zero vibrations. Instead, almost all petrol powered machines, which are not equipped with an anti-vibration system on steel springs, have a very high degree of vibration, making the work really unpleasant.
• Zero smoke emission, zero impact on the environment and, above all, on the operator’s health.
• Much quieter and therefore pleasant to use than a petrol engine.

The transmission shaft of the pruner has a diameter of 24 mm and it is made of aluminium. This makes it very durable while maintaining a low weight.

The weight of the machine without batteries and accessories is 3.2 kg and 4.5 kg with batteries.

Ergonomic loop handle.

The controls are simple and intuitive, with 3 electronic speeds.

Focus on the quick release.

This pruner attachment, which can be attached to the Makita DUX60Z, is the ideal product for pruning.

It features a 30 cm bar.

Semi-transparent tank to quickly check the lubricating oil level without having to remove the cap.

It can be easily attached to the pruner thanks to its quick coupling.

The bar cover made of plastic is included.

The extension pole allows the pruner to reach a total length of 3.28 m, allowing it to cut even the highest branches.

The extension pole is also equipped with quick coupling.

The machine is equipped with:

* The batteries can be used

• In series
• The voltages (V) are summed up
• The capacity (Ah) IS NOT summed up
• In parallel
• The voltages (V) ARE NOT summed up
• The capacity (Ah) is summed up