Makita DUR190LZX3 - Battery-powered grass trimmer - 18V 3 Ah

The Makita DUR190LZX3 18V edger is perfect for tending and trimming gardens and green areas.

Thanks to its ergonomic handle, it ensures precise handling, reducing vibrations and noise, for a more pleasant and less tiring job.

It is equipped with an automatic speed adjustment system, adapting to the various cutting needs.

One of the distinctive features of this tool is its XPT system, which allows use even in dusty and humid conditions, expanding its adaptability to different situations.

It also incorporates the AFT mechanism, which automatically stops the engine if the blade encounters an unexpected blockage, thus ensuring additional protection for the operator.

It has a power of 18V and reaches no-load speeds between 3500 and 6000 min-¹.

Its cutting capacity ranges from 230, 255 to 300 mm.

It uses a nylon thread with a diameter of 2.0mm.

With this machine you will have the following advantages:

- no more power cables
- no exhaust gases
- exceptionally quiet
- easy handling and comfort

BATTERY CHARGER AND 18 V 3Ah BATTERIES INCLUDED

LITHIUM-ION BATTERY AND BATTERY CHARGER INCLUDED

Battery equipped with quick release: the battery can be easily removed from the machine by simply pressing the quick release button.

Voltage: 18 V
Amperage: 3Ah

The practical battery can be recharged at any time, no memory effect (it does not tend to run out after many refills), always a great power.

Convenient battery charger included (it connects to the home mains as the charger of a mobile phone).

The battery is plugged to the battery charger through the quick release, in the same way as it is connected to the machine..

It is also possible to purchase additional batteries for ensuring a long-running time.

Therefore, you only need one battery and one battery charger in order to be able to use the full range of equipment offered by Makita.

LONGER LIFE: up to 3 times higher than nickel–cadmium batteries, reducing the need to recharge during long periods of use.
Ideal for medium-large gardens.

FULL CHARGE FOR THE ENTIRE BATTERY LIFE: the charge of the lithium-ion batteries does not fade. Unlike nickel-cadmium batteries, which power gradually decreases, lithium-ion batteries, cells maintain constant power throughout the entire cycle. The same charge for the entire cycle without reducing the motor speed. The battery is running at full power until its complete exhaustion.

LONGER CHARGE LIFE: lithium-Ion batteries last 3–4 times longer than traditional Nickel-Cadmium batteries and their power storage lasts longer so they lose less power. Lithium-ion batteries can be recharged up to 2000 times!

LIGHTWEIGHT: Lithium-ion batteries have the best power-weight rate. They weight 1/3 of nickel-cadmium ones.

ENVIRONMENTALLY-FRIENDLY: Lithium-ion battery-powered tools are recyclable and are produced without heavy metals.

NO MEMORY EFFECT: lithium-ion batteries can be recharged at any time without negative memory effect. Indeed, they don't fail to provide maximum power even after hundreds of charge cycles.
Few minutes of charge are enough to complete the work.

LOW DISCHARGE RATE: low loss of charge rate (up to 5 times lower than nickel-cadmium batteries) so your machine will be ready to use even after months of storage.

BATTERY CHARGER: lithium-ion batteries chargers allow reducing energy consumption by an average of 35%.

The Makita 18 V lithium-ion battery can be recharged at any time (just like the batteries of mobile phones, no memory effect) so it is always ready to use. It lasts an average of 3 times more than a standard battery. The battery is equipped with a comfortable charge indicator.

Main advantages of the electric motor:

• More reliable than an internal combustion engine. No spark plug, filters, oil dipstick, carburettors, etc. or components which can cause problems.
• Lighter
• Zero maintenance, for the same reasons given before.
• Lower consumption and drastically reduced operating costs compared to internal combustion engines (great results with minimal power required). In addition, the Operator won’t have to buy the fuel (that it should always be fresh).
• Zero vibrations, thanks to the electric motor. Instead, almost all engine-powered machines, which are not equipped with an anti-vibration system on steel springs, have a very high degree of vibrations, making the work quite unpleasant.
• Zero fumes, zero impact on the environment and, above all, zero repercussions on the Operator’s health.
• Quieter and therefore pleasant to use than an internal combustion engine.

Tap ‘n Go line head.

It has a maximum cutting area of 30 cm.

The edge trimmer drive rod is really sturdy and lightweight, made of aluminium.

Ergonomic handle.

The controls are easy and intuitive, allowing to select 3 electronic speeds.

The brush cutter weighs only 3 kg with battery.