Oma 100 L mounted sprayer for irrigation with A&R 252 - Annovi Reverberi pump is a spraying unit suitable for small and medium crops.
Equipped with main polyethylene tank with total emptying, it connects to the tractor via the 3-point linkage on the enamelled steel frame.
The tank is equipped with A&R - Annovi Reverberi medium-pressure pump, A&R 252 model, with two membranes, equipped with three-way pressure regulator.
Attention: universal joint for connection to tractor PTO not included
These are some of the accessories that can be mounted on the OMA mounted sprayers for irrigation.
Steel hose reel with 100 m blue netted high-pressure hose (25 bar) without accessories
Steel hose reel with 100 m blue netted high-pressure hose (25 bar) and brass lever lance
Steel hose reel with 100 m blue netted high-pressure hose (25 bar) and mitra lance
Steel hose reel with 100 m blue netted high-pressure hose (25 bar) and spray gun
Mechanical inter-row 2-nozzle weeding boom with medium cover
All the accessories are available in the RELATED PRODUCTS section.
Pump type: medium/high pressure, suitable for both spraying and weeding jobs
Alternative volumetric pump with two semi-hydraulic membranes. The parts touching the liquids are made of plastic-coated aluminium and stainless steel. Rubber membranes. Rubber seals. Die-cast carter with mechanical parts in an oil bath, tank made of transparent plastic material to check the level.
It allows operating:
- up to 2 to manual lever (or knob) lances simultaneously
- 1 heavy-duty gun lance
| Category | Medium pressure |
| Type | AR 252 |
| Number of membranes | 2 |
| Flow rate (l/min) | 24.6 |
| Pressure (bar) | 25 |
| Pressure (psi) | 362 |
| Power (HP) | 1.42 |
| RPM | 650 |
| Weight (Kg) | 4 |
| Suction (mm) | Ø 20 |
| Discharge (mm) | Ø 13 |
| Max. temperature | 60 °C |
Annovi Reverberi original production, MR series, for medium and high pressure, 3-way. It consists of 3 outlets, all available, all equipped with a valve, suitable for many uses.
Usually, the two horizontal outlets are used to connect, for example, a pair of spray guns for orchards/olive groves, or stainless steel booms for vineyards and so on... Instead, the central upward valve is most often used to connect a hose reel or simply a hose with a lance, or guns for spraying directly by hand.
Focus on the frame to raise the position of the controls
It is also possible to move the entire pressure regulation unit directly into the tractor cabin by purchasing the special kit (which extends the length of the the hoses)
Maximum flow rate: 80 l/min
Maximum pressure: 40 bar
Heavy enamelled steel frame, complete with 3-point linkage for tractor mounting.
The attaching points to the lifter are complete with pins.
This tank is equipped with two special vertical bars to which the supplied bracket kit is attached.
These brackets can be applied in many positions, making them suitable for accommodating any type of accessory on the market.
Example of bracket application with hose reel accessory
Focus on the frame to raise the position of the controls
Polyethylene tank with total emptying
Focus on the external level with graduated scale.
External suction filter
Focus on the external suction filter
Internal filter to clean the liquid from any possible residue or dirt during the tank filling phase.
Tank emptying valve. Accessible from behind the pump or after lifting the spraying unit
4 m 10 mm high-pressure hose, suitable for connecting all accessories with the pressure regulator unit and 2 clamps.
The sprayer is shipped on pallet, carefully packed, with instructions manual and tightening screws included
Fittings for the pressure regulator
.jpg)
To change language, please click on the following abbreviations:
