The Comet 48 pump is a MADE IN ITALY product equipped with 2 NBR2 membranes with a flow rate of 64.2 L/min.
This pump is available with single connection to accommodate a power take-off and can reach a working pressure of 30 bar.
It is a diaphragm pump specially designed to be compatible with plant protection products.
The casing is made of corrosion-resistant die-cast aluminium, ensuring product durability.
This design allows for optimal performance during use.
Technical data:
- Configuration 2 NBR diaphragms
- Pump flow rate: 64.2 l/min
- Maximum pressure: 35bar
- Power: 4.1 HP
- RPM: Max. 550
- Weight: 12.5 kg
- Non-passing 6-holes shaft
The oil level is easily visible through a porthole on the pump.
The Comet P 48 pump has a total weight of 12.5 Kg, which allows it to be moved without much effort.
ATTENTION!
To complete the equipment for its use, the PRESSURE ADJUSTMENT UNIT, which is to be coupled to it, and the male or female FORCE LIFT to operate it, must be purchased in addition.
The product is then completed and can be used by connecting it to your tractor. These accessories are shown in the 'Related Products' tab at the top and can therefore be purchased together with the pump.
PLEASE NOTE:
If products containing mineral substances such as Kaolin, Zeolite, Basalt etc are used... To avoid compromising the internal components of the pump in the long term, it is advisable to carry out flushes at the end of each treatment and at the end of each season the disassembly of some parts of the pump such as valves, heads and diaphragms, in order to clean any agglomerated residues sedimented by the minerals.
These procedures will ensure a long life of the pump even if the above-mentioned minerals are used.
