Spare Parts + After-Sales Assistance
5% off
from the 2nd item
Prompt Delivery +
Free Shipment

Ceccato KOMBI SPLET16 tractor mounted log splitter - 16 tons - 1100 mm piston's stroke

Max. trunk diameter
60 cm
Piston's stroke
110 mm
Thrust horse power
16 t
Max pressure
230 bar
Ground level cutting
Yes
Come back piston (for transport and storage)
Yes
Double speed
yes
Activation
tractor PTO
Operation
Three-phase 400V
Rated output
7.5 HP
Technology
Induction
Rated output (W)
5500 w
Three-point linkage to tractor
Yes
CE compliant safety switch
Yes
Manufacturing Country
Italy
€ 2.916,00
VAT Included
Prompt Delivery
2 items in stock
|
Free Shipping
You should receive it by 12/11/2020
ID: 3748
EAN: 9993089183577
MPN: KOMBI SPLET16

Kombi SPLET16 log splitter

Bull KOMBI SPLET16 vertical log splitter with double combined activation is intended for professional uses. You can choose if using the log splitter with cardan shaft in order to link it to the tractor by means of the power take-off or if using the 7.5 Hp three-phase electric motor by connecting it to a socket.

KOMBI SPLET16 is provided with a big blade, which slides on stainless steel lateral guides, that keeps the cylinder safe even under maximum stress.

The 16 tons thrust horse power allows splitting hard logs up to 114 cm (height) by means of the additional controls on the upper part of the machine in order to split big logs.

Moreover, it is provided with a hydraulic double pump on the electric motor and with a big pump on the gear-system multiplier when using the machine with cardan shaft in order to guarantee a stronger horsepower and an increased working speed by means of high-quality distributor.

It is provided with security upper support and adjustable piston's stroke length provided with automatic system. The machine is provided with closable piston.

This high-quality log splitter allows easy and safe splitting operation: KOMBI SPLET16 log splitter is provided with dedicated security features that allow a completely safe operation.

Ceccato Bull log splitter is entirely made in Italy.

The unprecedented security of Ceccato Olindo log splitter

WEDGE: splitting wedge with inclination of 3 degrees towards the column.

BASE: the thickness of the support plate is 50 mm, therefore machine is very stable. The base plate extends 100 mm over the edge of the splitting wedge.

STROKE: the splitting wedge at stroke end features a residual distance of 100 mm from the support plate.

UPPER CONTROL LEVERS: shortened levers in compliant with the regulation

LOWER CONTROL LEVERS: shortened levers in the log supporting arms and their positioning respecting the height measurements established by law. Moreover, they feature a shape apt at preventing logs falling towards the operator.

HYDRAULIC TUBES: we increased the tube diameter. This enables a lower oil temperature. Protection and skimming with Ceccato Olindo fabric-waven and silk-screen printed sheath closed with steel studs. In case of brake or burst, it holds the oil steaming it without any risk of injury.

LOG LIFTING: set for the installation of the log lifting device synchronized with the movement of the cutting wedge.

THIRD WHEEL: set for the installation of the rear third wheel. In case of manual movement it reduces the risk of back overturning.

In each machine model there are pictograms required by regulations and updated use and maintenance manuals.

Ceccato Olindo's log splitters are in compliance with DIN EN 609-1:2017 regulation.

Two-in-one product: powered by electric motor

You can use this machine by connecting it to a 400V power supply. It is powered by its 7.5 Hp three-phase motor. Its power is 5500 w.

The log splitter works by using the high-performance hydraulic pump motion (230 bar). It drafts the oil from the tank on the bottom of the machine and can pump 49 L/min. It moves the hydraulic cylinder which acts as log pusher.

Hydraulic oil tank embedded on the hydraulic vertical electric log splitter's main frame.

High-quality hydraulic pump reduces working times and increases its performances.

The pump is linked to a high-quality big hydraulic distributor in order to keep it safe even under maximum stress.

Focus on the circuit breaker: safety device (IP54 protection) intended for your motor.

The hydraulic pump is strictly Italian-made.

Two-in-one product: tractor mounted with cardan shaft

You can choose to use this log splitter by linking it to the tractor by means of the cardan shaft.

The log splitter works by using the high-performance double hydraulic pump motion, which achieves 230 bar working pressure and can pump 40 L/min. It drafts the oil from the tank to the hydraulic piston.

Hydraulic oil tank embedded on the hydraulic vertical electric log splitter's main frame.

The sturdy frame is equipped with three-point linkage to tractor.

Focus on the gear-system multiplier made of tempered steel in oil bath with external cover made of melting aluminum.

The gear-system multiplier produces a torque that is applied to the hydraulic pump from the tractor (by means of the cardan shaft).

Focus on the hydraulic cartridge filter made of metal.

1100 mm piston's stroke

The 16 tons thrust horsepower allows splitting hard logs up to 114 cm (height) by means of the additional controls on the upper part of the machine in order to split big logs.

This is possible thanks to the very sturdy and big piston, which has a 100 mm outer diameter and a 60 mm inner diameter.

The 1100 mm piston runs on slides above steel guides that keep the cylinder safe even under maximum stress. Moreover, it is provided with high density ABS piston's lateral guides with replaceable plate. Its bronze plate protects the main steel support against wear.

Adjustable piston stroke: you can adjust it for the shorter logs, further reducing the working times. Adjust the stroke by means of the dedicated wrench.

Focus on the adjustable piston stroke which is intended to stop the come back motion.

Focus on the adjustable piston stroke which is intended to stop the cutting motion.

You can dismantle and close the piston in order to shorten the height of the log splitter.

Dual control and adjustable speed

This log splitter is provided with adjustable speed to activate the piston and the dual control activation.

Focus on the upper control handles and on the lower control handles.

Both the hands must be used to activate the log splitter. In this way all risks of injuries are avoided.

With only one small pressure on the control handles the speed of piston's extension will be increased before contacting wood.

With a greater pressure on the control handles the speed of hydraulic cylinder's extension will decrease when going deep into the log with the 16 tons power.

Single or double speed can be selected by simply pressing strongly or weakly the control handles. Instinctively, the user will highly press the handles when the wedge will have reached the log in order to concentrate all the log splitter's power for the log's splitting.

Other features

The log splitter is made with thick enamel painted extruded steel that forms the extra sturdy boxed frame. Most log splitters on market mount an “H” shaped frame but this Ceccato log splitter mounts a boxed frame which is reinforced with front plate where the wedge slides. This plate is made of high-strength tempered steel, which is harder than the steel used for the frame. This means that the frame and the support are very sturdy and strong.

Even just one person can transport the machine by hand (even if it is 300 kg), as it is provided with wheels for transport and is perfectly balanced.

Focus on the wheels for transport (diameter: 27 cm).

Focus on the three-point linkage: upper part.

Focus on the three-point linkage: lower part.

Focus on the lifting point.

This machine comply with the security Directives in order to guarantee a completely safe operation.

Other features

Wedge come back block device if the wedge is boxed in the log. Wedge come back is automatically stopped when pressing the above mentioned upper support. This allows a completely safe operation avoiding any hand and wrist accident.

Focus on the wedge.

Focus on the heavy-duty hydraulic distributor.

Focus on the removable cutting platform to allow the ground level cut.

Focus on the hydraulic oil drain plug.

Details of the hydraulic oil level.

The hydraulic circuit is provided with cartridge filter made of metal.

Focus on the very thick base support.

Adjustable piston stroke: it can be shortened for the shorter logs, further reducing the working times. Adjust the stroke by means of the dedicated wrench.

Focus on the adjustable piston stroke which is intended to stop the come back motion.

Focus on the adjustable piston stroke which is intended to stop the cutting motion.

Focus on the high density ABS piston's lateral guides with bronze plate.

Product Features
Model:
SPLET 16 KOMBI
Typology :
Vertical
Double speed:
yes
Activation:
tractor PTO
Thrust horse power:
16 t
Piston's stroke:
110 mm
Reducible piston's stroke (for short logs):
Yes
Worktop log cutting:
Yes
Platform positions:
1
Ground level cutting:
Yes
Manufacturing Country:
Italy
Motor data
Motor/Engine brand:
LUCME
Motor type:
Electric three-phase
Technology:
Induction
Rated output:
7.5 HP
Rated output (W):
5500 w
Motor Speed (RPM):
1450-540 RPM
Power supply:
Electric - tractor's linkage
Tank capacity:
18 L
Manufacturing Country:
Italy
Pump data
Pump type:
Double
Flow Rate:
49 L/min
Max pressure:
230 bar
Oil tank:
Yes
Outer hydraulic cylinder's diameter:
100 mm
Piston's diameter:
60 mm
Piston's speed:
25.5-26 cm/s
Piston's speed (2):
9.5-10 cm/s
Come back speed:
15.5-16 cm/s
Manufacturing Country:
Italy
Cutting data
Maximum trunk length:
65 cm
Max. trunk diameter:
60 cm
Equipment
Frame:
Standard
Pump:
Standard
Upper safety lever to protect hands when logs are boxed:
Yes
Side arms for cut logs containment:
No
Trunk containment brackets:
No
Log lifting system:
No
Come back piston (for transport and storage):
Yes
Log laying platform:
Yes
Three-point linkage to tractor:
Yes
Replaceable wedge guides:
Yes
Oil filter cartridge:
Yes
CE compliant safety switch:
Yes
Transport trolley:
Yes
Rear wheels size:
27 cm
Pressure gauge on pump:
No
Free gifts/extra features
Four way wedge:
No
Splitting wedge:
No
Instructions manual:
yes
Dimensions and logistics
Product dimensions cm (LxWxH):
110x70x270 cm
Net weight:
370 Kg
Packaging:
On pallet
Packaging dimensions cm (LxWxH):
120x80x230 cm
Gross weight (packaging incuded) :
385 Kg
Hydraulic tail lift delivery:
Yes
Assembly time:
15 minutes

Free gifts and extra features

The log splitter is shipped in a proper package and is supplied on pallet.

Instructions and maintenance manual provided on standard kit.

Pins for the three-point linkage to tractor provided on standard equipment.