Castelgarden XDC 140 Riding-on Mower - Mechanical Gearbox - Grass Collector - Select your GIFT!

CastelGarden XDC 140 riding-on mower with grass collector.

The riding-on mowers with rear grass collector by CastelGarden are ideal for mowing in large-sized spaces without too many obstacles. This model is suitable for both hobby users who need to mow the home garden, and for gardening professionals thanks to its large 84 cm 2-blade cutting deck which allows it to carry out accurate cutting work on medium-sized surfaces.

This riding-on mower belong to a range of powerful, easy-to-operate and versatile machines. The minimum steering radius and the powerful engine make this riding-on mower ideal for surfaces of up to 3000 s.q. m. The 2-blade cutting deck conveys large quantities of even tall and wet grass into the rear collector to then be discharged directly and conveniently from the driver’s seat pulling the dedicated lever on the grass collector.

This model is also fitted with the mulching cutting system, for environmentally friendly and fast mowing.

This brand new model features a refreshed design and mounts a powerful 352 cc STIGA ST 350 engine.

Ideal for users looking for a high-featured machine close to heavy-duty level.

1 - GRASS COLLECTION SYSTEM (on standard equipment):

Brand new and large-sized 200 L capacity grass collector, among the most capacious in its class.

Emptying the grass collector is extremely easy and can be carried out by acting on the removable handle. It will thus be possible to empty the grass collector at any time while working without any effort.

The grass collector is easy removable: simply lift it upwards to remove it from its housing.

2- MULCHING CUTTING SYSTEM (optional):

This grass mowing system allows crushing grass clippings and dropping them on the ground. The resulting grass particles are extremely fine that they will be barely noticeable on the lawn. This eliminates the problem of its disposal (reducing any effort and shortening the time-saving). Moreover, grass clippings will break down into nutrients and water for the lawn (grass is 80% water) and will thus ensure a perfectly balanced biological cycle. However, it is worth remembering that, to ensure the greatest mulching results, the lawn should be irrigated and the grass needs cutting at least once a week. The conversion from one system to another is easy.

The ST 350 engine is high-performing, suitable for tasks where high working power is required.

Latest generation single-cylinder 352 cc 4-stroke engine with “OHV” overhead valve shaft.

It is a professional engine which guarantees reliability and durability. This is one of the most famous engines around the world, both among riding-on mowers and the greenery and agricultural field in general.

It develops an effective power of 8.8 Hp at 2400 rpm.

The engine is equipped with a starter motor and the ignition takes place with the key.

The engine is connected to a sturdy hydrostatic transmission

Focus on the filter

Ignition key

Nominal Power: 11.5 Hp
The correct term would be "Commercial” Power, meaning the standard definition used until a few years ago by all well-known engine manufacturers.

* This technical feature is the one indicated in the main sales channels, even if it is higher than the real power of the engine.

Rated power: 8.8 Hp (at 2400 rpm)
It refers to the real power of the engine. This is the power indicated as official in the engine instructions manual.

* This technical feature may vary from an engine model to another according to the rotation speed provided by the manufacturer.

The CastelGarden XDC 140 riding-on mower is equipped with a 2-blade cutting deck.

The riding-on mower is provided with collecting blades

84 cm cutting deck width.

The riding-on mower cutting deck is tilting: it adapts easily to the undulations of the ground (as long as they are not overly harsh). Furthermore, this model features a large protection which entirely envelopes the cutting deck.

Electromagnetic blade engagement controlled by means the button placed on the right of the steering wheel. This system avoids the manual shifting by means the standard lever placed on many types of riding-on mowers, and it works thanks to an electromagnetic clutch which allows an easy and fast engagement of the blades.

The cutting height of the cutting deck is adjustable by means a lever.

The cutting positions available are 7 and they vary from 80 mm to 25 mm.

The cutting deck is equipped with 2 non-marking wheels and a double washing joint, one for each side of the cutting deck (right and left).

The CastelGarden XDC 140 riding-on mower controls and adjustments are easy and intuitive:

• Speed regulator
• Parking brake
• Ignition lock with key:
• Braking pedal
• Cutting height adjustment lever
• Forward and reverse gears engagement gearbox
• Electromagnetic blade engagement with red button placed on the right of the steering wheel

Other features of the CastelGarden XD 140 riding-on mower:

• Openable engine bonnet for easy cleaning and maintenance operations
• Adjustable comfort seat for maximum comfort during use
• Ergonomic steering wheel
• Sturdy front bull bar: It avoids frontal impacts and protects the machine.
• 18 x 8.5-8 large rear wheels
• 13 x 5.00-6 front wheels
• Pivoting front axle which ensure excellent balance, stability and riding comfort, even on not-perfectly flat terrains.
• Cup holder
• Focus on the cutting deck washing joint
• Focus on the anti-scalp wheels of the cutting deck.
• Focus on the halogen headlights
• Focus on the additional glove box.