BlackStone B-ST 76 LTE - Petrol Snowplough - Tracked - Loncin 180F(D)S

The BlackStone B-ST 76 LTE snow blower is equipped with a powerful 302cc Loncin 180F(D) S engine which can reach a nominal power of 11 HP.

It is a heavy-duty product equipped with a large 76 x 54 cm front auger with optimized profile steel spiral and serrated edge. The auger shreds the snow and expels it many meters away through the discharge chute which is tilting and adjustable.

The roller tracks with which it is equipped and the different working positions make this snow blower very stable and efficient.

The electric starting of the snow blower is possible through the domestic current, allowing the machine to be switched on even at very low temperatures.

Other machine features include:

• Electronically heated handles
• LED light
• Assisted steering
• Mechanical gearbox with 6+2 gears
• Upper deflector
• Snow cutting bars
• Clean-out tool for unclogging

The snow blower is equipped with a 302 cc 4-stroke air-cooled Loncin 180F(D)S engine, with over head valves and aluminium cylinder.

Features:

The engine of this snow blower is also equipped with electric starting. This machine is equipped with battery. In fact, it allows you to start the snow blower directly from the available electrical socket. This solution was devised as batteries, subjected to sudden changes in temperature, tend not to hold the charge.

Focus on the engine oil cap

Focus on the ignition keys

WARNING
The engine is PROVIDED WITHOUT OIL.
Please carefully read the instruction manual before starting the unit.

Nominal Power: 11 The correct term would be "Commercial” Power, meaning the classic power definition standard officially used until a few years ago by all leading engine manufacturers.

* This data is even more widespread and advertised in the leading commercial channels, although it is higher than the actual power.

Effective power: 8.3 HP (3600 rpm)
It corresponds to the real power expressed by the crankshaft. This is the power indicated as official in the manual or in the technical data of the motor manufacturer.

* This technical data may vary for the same engine model depending on the rotational speed supplied by the engine applied to the equipment.

The 3-roller track with which this snow blower is equipped is superior, compared to traditional 2-roller tracks, in tackling dirt, bumpy or sloping roads, thanks to the greater adaptability to the roughness of the ground.

This is possible thanks to the distance between the steel rollers at the base of the track, which make it better adapt to the ground.

Instead, in the 2-roller system, the rollers are very close, making the track very stiff.

Another important advantage is easier maintenance. In fact, track tensioning is much easier thanks to the external tensioning system placed on the rear steel roller.

The discharge chute of this tracked snow blower is made of enamelled steel and adjustable through the knob placed on the dashboard.

The rotation angle of the chute is 190°: from the centre, the snow blower chute rotates by 95° on both sides

Focus on the chute oriented completely to the left

Focus on the chute oriented completely to the right

Deflector placed completely at the top to obtain the maximum ejection distance.

Deflector placed completely at the bottom.

The chute is also equipped with an anti-intrusion safety grid.

The auger compartment is 76cm wide and 54cm high.

The auger supplied with the snow blower is heavy-duty with steel spiral with an optimized profile and serrated edge. These features make it suitable to shred even the hardest snow.

The safety bolts protect the integrity of the gear reducer. They are in fact specifically designed to fail when the blade gets stuck against some stone or obstacle.

Two-stage

The snow is efficiently collected inside the machine by the auger, which expels it through the discharge chute via a high-speed internal centrifugal fan equipped with reinforcement bars.

Aluminium angle reducer with internal grease-bath steel gears.

Adjustable plastic side slides
They allow this snow blower to work on all types of terrain, from the smoothest to those not perfectly even (by raising the working height through the slides). It can also work on gravel surfaces.
The plastic structure allows you to work even on particular grounds without scratching them.

The Blackstone tracked snow blower can be set in 3 working positions, to meet every need.

Displacement position: the auger is raised to facilitate moving operations.

Working position in normal conditions: work function, the auger is parallel to the ground.

Working position with particularly hard snow: work function with the auger facing the ground. This way, it is like the auger is digging in the snow.

The positions are adjustable via the special pedal placed at the bottom, in front of the feet of the operator.

The control panel of this snow blower is simple, intuitive and very functional, also equipped with electronic control of the machine settings.

Right gear lever: 6 forward speeds 2 reverse speeds

Assisted steering: the special red lever allows you to unlock the wheel traction, facilitating steering. It makes maneuvers or gear reversing considerably easier.

Electrically heated handles: provide exceptional comfort while working.

Focus on the switches equipped with power LEDs that start the LED light and heated handles

Top lever on the right handle: activates and deactivates the machine, (whatever the gear selected on the automatic transmission, forward or reverse). By releasing this lever, the machine stops instantly, for safety reasons.

Top lever on the left handle: activates and deactivates both the auger and the high-speed fan (activates and deactivates both simultaneously).

Discharge chute adjustment: adjustable through the knob

Lighting is powerful and precise thanks to the led lamps placed in front of the control panel.

Clean-out tool for unclogging: if the discharge chute clogs, you can easily fix it with this tool.

2 POSSIBLE CONFIGURATIONS:

- Upper auger deflector:
when snowdrifts are particularly high and consistent, it allows to improve the machine performance, easily channelling a much higher layer of snow inside the auger.

- Side snow bars:
when snowdrifts are particularly high and consistent, they prevent the snow on the sides (which is sharply cut by these bars) from falling back onto the surface that has been just swept.

The machine is shipped in its original packaging on pallet.

Included in the packaging:

• Instruction manual
• Engine maintenance manual
• Spare safety bolts
• Pair of ignition keys
• Maintenance keys
• Snow bars
• Clean-out tool for unclogging