BlackStone B-ST 61 LW - Petrol Snowplough - Loncin H200

BlackStone B-ST 61 LW is a product suitable for those who need to remove snow from sidewalks, walls or any external area.

It is a very compact and easy to transport machine, it has a 61 x 51 cm front auger and a chute adjustable via a crank handle which can rotate and direct the snow as needed. In addition, the chimney is equipped with an upper deflector that can be tilted in different positions.

Equipped with large 13'' rear traktor wheels that provide it with excellent adherence to the ground and a great traction capacity.

It features a 196cc Loncin H200 engine. It can reach a nominal power of 6.5 HP.

It is equipped with a large 66 x 54 cm front auger with optimized profile steel spiral and serrated edge.

Some of the features of this model:

• Mechanical gearbox with 4+1 gears
• Clean-out tool for unclogging

The snow blower is equipped with a 196cc 4-stroke air-cooled Loncin H200 engine, with overhead valves and aluminium cylinder.

Features:

Focus on the engine oil cap

Focus on the ignition keys

WARNING
The engine is PROVIDED WITHOUT OIL.
Please carefully read the instruction manual before starting the unit.

Nominal Power: 6.5 The correct term would be "Commercial” Power, meaning the classic power definition standard officially used until a few years ago by all leading engine manufacturers.

* This data is even more widespread and advertised in the leading commercial channels, although it is higher than the actual power.

Effective power: 7.5 HP (3600 rpm)
It corresponds to the real power of the crankshaft. This is the power indicated as official in the manual or in the technical data of the motor manufacturer.

* This technical data may vary for the same engine model depending on the rotational speed supplied by the engine applied to the equipment.

The discharge chute of this snow blower is made of enamelled steel and is adjustable through the knob placed on the dashboard.

The rotation angle of the chute is 190°: from the centre, the snow blower chute rotates by 95° on both sides

Focus on the chute oriented completely to the left

Focus on the chute oriented completely to the right

Deflector placed completely at the top to obtain the maximum ejection distance.

Deflector placed completely at the bottom.

The chute is also equipped with an anti-intrusion safety grid.

The auger compartment is 61cm wide and 51cm high.

The auger supplied with the snow blower is heavy-duty with steel spiral with an optimized profile and serrated edge. These features make it suitable to shred even the hardest snow.

The safety bolts protect the integrity of the gear reducer. They are in fact specifically designed to fail when the blade gets stuck against some stone or obstacle.

Two-stage

The snow is efficiently collected inside the machine by the auger, which expels it through the discharge chute via a high-speed internal centrifugal fan equipped with reinforcement bars.

Aluminium angle reducer with internal grease-bath steel gears.

Adjustable plastic side slides
They allow this snow blower to work on all types of terrain, from the smoothest to those not perfectly even (by raising the working height through the slides). It can also work on gravel surfaces.
The plastic structure allows you to work even on particular grounds without scratching them.

The control panel of this snow blower is simple, intuitive and very functional.

Right gear lever: 4 forward gears, 1 reverse gear

Top lever on the right handle: activates and deactivates the machine, (whatever the gear selected on the automatic transmission, forward or reverse). By releasing this lever, the machine stops instantly, for safety reasons.

Top lever on the left handle: activates and deactivates both the auger and the high-speed fan (activates and deactivates both simultaneously).

Lever to tilt the deflector

Discharge chute adjustment: adjustable through the knob

Clean-out tool for unclogging
If the discharge chute clogs, you can easily fix it with this tool.

Traktor model wheels which guarantee enormous adherence to the ground, making the most of the engine power.

The dimensions are 13x4.10-6