Spare Parts + After-Sales Assistance
5% off
from the 2nd item
Prompt Delivery +
Free Shipment

Tractor shredder Ceccato Tritone P.T.O. with three point linkage to tractor

Body material
Enamelled steel
Max branch cutting diameter
50 mm
Wood Chip size
2 - 3 cm
Cutting Rotor Type
Knives + hammers
Blade quantity
2
Number of hammers
8
Three-point linkage to tractor
Yes
Activation
tractor PTO
Transmission type
belt
N° of hoppers
1
Interchangeable sieves
Yes
Discharge chute rotation
Manual
Chute deflector inclination
Manual
Manufacturing Country
Italy
€ 1.273,49
VAT Included
Prompt Delivery
23 items in stock
|
Free Shipping
You should receive it by 12/11/2020
ID: 2078
EAN: 9900000001070
MPN: TRI-CARD

Tractor shredder Ceccato Tritone P.T.O. with three point linkage to tractor



Professional rank tractor shredder.



Wood chips sample



UNIFIED HOPPER

UNIFIED HOPPER: make the work much more easy and fast.
It eliminates the operation of dividing material before crushing between the biggest and woody sections and the smallest and green ones that must be introduced in different hoppers.
Example of two hopper shredder
SELF-FEEDING (once branches are introduced inside the hopper, the hopper draws them inside it). See the attached video.
This is made possible thanks to the new hopper designed in an almost vertical position.

With the gravity force's, its gear pulls the to-be–crushed branches inside it.

ATTENTION: fronds must be not too voluminous, as this may limit their function.

PROFESSIONAL REVOLUTIONS MULTIPLIER

Oil bath gear professional revolutions multiplier.

Very big and sturdy, manufactured in Italy (as the 100% of the shredder is).

MIDDLE, REINFORCED 2 BELTS TRANSMISSION.

This gives the product an out of common sturdiness, protecting both the motor and all the crushing gear from any inner hit or recoil. If a big wood (or stone, or other) blocks the rotor, there is not any risk to break the transmission shaft, as the belt will slide with a clutch function, or, in the worst case, the middle belt will be broken.


CENTRAL ROTOR

The central rotor is made of 2 steel disks, firmly matched together.
They made one only extremely sturdy body (the shredder’s heart) of really superior dimensions, sturdiness, performances.
This rotor is among the greater and sturdy rotors in the full market.
Focus on the steel sheet thickness of the two rotor’s disk.
Provided with 2 very big cutting blades.

They have a pre-working function by selecting all material on the hopper in rough fragments.
On the picture aside the exceptional thickness of the two blades and the even 4 tempered steel bolts.
Provided with 8 chopper blades (or hammers) made of tempered steel and high speed rotating.

They have a centrifuge action, reducing material in small dimensions fragments.

Interchangeable counter-blades

The main feature making this tractor shredder the number one in its category is its really professional features and performances.
Once the hopper is mounted, they result in a very close position to the two rotating cutting blades shown here above that are fixed on the rotor.

Hence, “blade and counter-blade” system, makes cut more easy and efficient, decreasing in the same time the motor’s effort.
They speed up the working efficacy and work efficacy very much.

Features

Cutting diameter is absolutely the bigger between the hopper shredders: 50 / 60 mm,
depending on the wood consistency, while the best competitors have 40-50 mm).

Well structured three point linkage, sturdy and adaptable to all the tractor’s models on market.
Front side view of the power-take-off and the reducer.
Big steel hopper able to receive even very voluminous branches and fronds without a previous work all at once.
Moreover, it has a big capacity for even a high quantity material introduction all at once.

Focus on the outer crushing room (bigger and sturdiest on its category). It is proportioned to the rotor’ dimensions. It is very wide and rounded. It guarantees excellent productivity, as well as the system’s duration.



Focus on the side view of the crushing chamber. The steel sheet thickness it is made of is clearly visible (we underline that the equipment’s total weight is 100 kg).
One of the few having a grid on the exit opening that can be opened and closed, it allows fragments are expelled by the 8 shredding blades (hammers).

Grid is provided with a pivot pin and knob for its inserting in and removal from the chute.
By lifting the grid, big sized fragments will be produced, maximizing the hour production of the shredders.

By lowering the grid, indeed, will be maximized the machine crushing capacity, by producing smaller fragments.
The fragments produced when the grid is on, are 2-3 cm in general.
Focus on the outer grid adjusting knob.
Output: 2-3 cubic metres per hour.
Machinery’s structure is made of 100% steel. On this product there is not any plastic.

Big size tyres.
Focus on the anti vibration pads on the motor’s side.
Weight: 100 kg
Large and sturdy fixing plate of the hopper to the frame.
Product Features
Model:
Tritone PTO
Body material:
Enamelled steel
Activation:
tractor PTO
Automatic roller:
No
Anti-jam system:
No
Discharge chute:
low
N° of hoppers :
1
Hopper opening dimensions (height):
34 cm
Hopper opening dimensions (width):
35 cm
Self-Feeding:
Tractor-mounted external
Grid for fragments' reduction:
Yes (removable)
Interchangeable sieves:
Yes
Wood chips with sleve min dimensions:
0.8 cm
Electric start:
No
Foldable:
No
Manufacturing Country:
Italy
Transmission data
Transmission type:
belt
Cutting data
Outer body material:
Enamelled steel
Max branch cutting diameter:
50 mm
Cutting Rotor Type:
Knives + hammers
Blade quantity:
2
Number of hammers:
8
Blade movement:
rotating
N° of knives:
8
Counter-blades:
2
Wood Chip size:
2 - 3 cm
Equipment
Three-point linkage to tractor:
Yes
Discharge chute rotation:
Manual
Chute deflector inclination:
Manual
Rear wheels size:
2.50 - 4"
Rotation Reverser:
No
Free gifts/extra features
Cardan shaft:
Extra price accessory
Instructions manual:
yes
Dimensions and logistics
Product dimensions cm (LxWxH):
83x134x106 cm
Net weight:
100 Kg
Packaging:
On pallet
Packaging dimensions cm (LxWxH):
90x90x150 cm
Gross weight (packaging incuded) :
105 Kg
Hydraulic tail lift delivery:
Yes
Assembly time:
15 minutes