Spare Parts + After-Sales Assistance
5% off
from the 2nd item
Prompt Delivery +
Free Shipment

Tractor PTO powered Ceccato Olindo wood pellet machine for the domestic production of pellet for heating

Body material
Enamelled steel
Hopper opening size
35 x 45 cm
Assembly time
Manufacturing Country
€ 3.006,53
VAT Included
Prompt Delivery
2 items in stock
Free Shipping
You should receive it by 06/11/2020
ID: 3680
EAN: 9993089181771

Tractor PTO wood pellet machine

Thanks to this machinery, you can produce pellet at home when you need to stock many sacks of it. 

Moreover, you will be able to recycle your garden shredder's wood chips in a very profitable way: with great simplicity, you will have the possibility to produce a very efficient fuel from an energetic point of view.

This model is not equipped with engine because it is directly connected to the tractor by means of the power take-off.

P.T.O.: max 540 rpm

Maximum rated output: 18 Hp.

This machine is fully made in Italy according to high quality standards. 


WARNING: the wood pellet machines have been designed for the pellet production by using only small-sized material once shredded by a garden shredder. Thus, we highly recommend the use of a shredder equipped with an interchangeable sieve on the output opening, which allows obtaining regular small wood chips (Ceccato Tritone, Tritone Maxi and AgriEuro 7 HP and 15 HP models have been deeply tested, ensuring in this way all the specifications mentioned above).

How can I produce pellet at home?

  1. Crush wood by using a garden shredder: the first thing to do is to take wood and shred it with the wood shredder. Do not use any sieve.
  2. Double crush the wood chips: put again the wood chips into the garden shredder. Use the sieve most suitable to your needs according to the garden shredder model in order to sieve chips at the right size for this wood pellet machine.
  3. As wood must be green to be shredded, the shredding result will need to be dried. before it is worked with the pellet machine. The humidity degree must be between 10% and 14%.
  4. Once the chipped wood is dried, it will be sufficient to put it into the hopper of the wood pellet machine and finally transform it into pellet.

We recommend you to use only pure and clean material, free from any different materials such as metals and plastics that may damage the machinery. Results may change depending on the kind of wood and the wood chips desiccation.

For the continuous pellet production is necessary that an operator continuously supplies the machine with the chipped wood.

Here follow some examples of garden shredders for crushing chips suitable for you wood pellet machine: you can mount a sieving grid (8 mm or 10 mm) according to the model for sieving chips at the right size for this wood pellet machine.

WARNING: both small-sized wood residuals coming from the wood processing as well as sawdust are not suitable for pellet machines because of their length, which exceeds from that one allowed while their thickness is lower compared to the one required. The wood chips are the only material allowed for these machines as mentioned above.

Technical features

The wood pellet machine, in other words the machine that produces pellet, is equipped with extruder (diameter: 119 mm). The 78mm diameter pressure rollers movement (equipped with two bearings each) compresses the material. Moreover, the press rolls movement is generated by the tractor PTO. Connect the wood pellet machine by means of its frame.

Put the material into the hopper.

The produced pellet is discharged through the side chute.

The wood pellet machine's production is going from 40 to 70 kg. Pellet's section is 6 mm. The pellet length is going from 25 to 35 mm. 

Overall dimensions:

Lenght: 850 mm;
Width: 730 mm;
Height: 1270 mm.

The machine is provided with 2 big size tyres made of solid rubber for transport.

Focus on the PTO for the linkage to tractor.

Focus on the frame pin for the tractor's linkage.

The machine is not equipped with controls for the machine activation. The machine will start working by means of the PTO rotation. P.T.O.: 540 rpm, 18 Hp.

Product Features
Body material:
Enamelled steel
tractor PTO
Hopper opening size:
35 x 45 cm
Output capacity:
40 - 70 Kg/h
Manufacturing Country:
Motor data
Max. revolutions per minute:
540 rpm
Power supply:
Tractor PTO
Manufacturing Country:
Front Handle:
Free gifts/extra features
Instructions manual:
Dimensions and logistics
Product dimensions cm (LxWxH):
85x73x127 cm
Net weight:
158 Kg
On pallet
Gross weight (packaging incuded) :
170 Kg
Hydraulic tail lift delivery:
Assembly time:

Free gifts and extra features

On standard equipment:

Instructions with maintenance and cleaning procedures.

Extractor to take off the extruder for the cleaning operations.

Tractor fixing pins.