GeoTech SS 680 WEL EVO - Petrol Snowplough with Electric Start - Multifunction - Loncin H200

The GeoTech SS 680 WEL EVO multi-tool snow blower is fitted with a petrol engine, and it features a quick connect-release system for attachments. Suitable for small to medium-sized sites. Great grip and adherence to the work surface for perfect results.

This power brush is equipped with a set of tractor style wheels for amazing grip and traction.

Free items:

• snow plough
• 80 cm power brush
• collection box

You can drive the power sweeper thanks to the levers on the control panel.

The operator can reach and operate all the main controls by standing or walking behind the machine.

This snow blower was designed for removing and throwing snow from pavements, gardens, driveways and other ground-level sites

ATTENTION: THE ROTATING CHUTE OF THIS SNOWPLOUGH MAY VARY FROM PLASTIC TO STEEL, ENSURING GREATER STRENGTH.

Features:

This snow blower engine also features an electric activation system without a battery. This allows starting the snow blower by using the power plug. Sudden temperature variations make batteries lose their charge. A battery-free electric starting system is the best solution to this problem.

Focus on the engine On/Off switch

Focus on the cold-start primer

3.6 L fuel tank

WARNING:

The engine will NOT CONTAIN OIL when delivered.
Read the instructions manual carefully before starting the engine.

ATTENTION: THE ROTATING CHUTE OF THIS SNOWPLOUGH MAY VARY FROM PLASTIC TO STEEL, ENSURING GREATER STRENGTH.

The snow auger is 50 cm wide and 40 cm tall.

The steel spiral auger features an improved shape and notched edges.

Two-stage system

The snow gets fed into the housing by the ribbon auger and is then discharged through the chute by means of a high-speed internal impeller.

Adjustable plastic skid shoes allow working on all kinds of surfaces, from smooth to rough sites. All you have to do is adjust the skid shoes, and thus, the working height. It can also work over gravel surfaced sites. Because they are made of plastic, skid shoes can be used on any surface and will not scratch it.

ATTENTION: THE ROTATING CHUTE OF THIS SNOWPLOUGH MAY VARY FROM PLASTIC TO STEEL, ENSURING GREATER STRENGTH.

This multipurpose self-propelled snow blower features rear-wheel drive and a 7 speed gear shifting system: 5 forward speeds and 2 reverse speeds. The gear shifting lever is placed on the control panel.

The clutch lever is placed on the handle.

Tractor-style drive wheels suitable for snow conditions.

There are two levers on the handles:

One of the two levers egages and disengages motion at any speed, both for forward or reverse gears. The other lever engages and disengages both the snow auger and the high-speed impeller for chute discharge (the lever engages or disengages both stages at the same time).

ATTENTION: THE ROTATING CHUTE OF THIS SNOWPLOUGH MAY VARY FROM PLASTIC TO STEEL, ENSURING GREATER STRENGTH.

This multipurpose snow blower features a quick attachment release system. The release pedal on the side makes it very easy to remove and attach accessories.

Focus on the sturdy attachment connector on the machine.

This multi-tool snow blower features a quick-connect system, and it comes with three useful attachments.

• 80 cm brush for sweeping gravel and debris off driveways.
• Handy collection box to be attached to the front of the power sweeper. This accessory allows collecting most bits and fragments that get swept by the front brush.
• 80 cm snow plough attachment to be attached and secured to the front of the power sweeper. This accessory allows using the machine as a power snow plough on taller snow and remove any snow that may have got left behind. This way you can keep your driveways and pavements clean even after heavy snowfall.

You can use this machine to clear debris and dirt from pavements, gardens, driveways and other ground-level areas in power sweeper mode.

The sweeper can remove:

• Leaves
• Snow
• Fine dust
• Gravel
• Small fragments and so on

ATTENTION: THE ROTATING CHUTE OF THIS SNOWPLOUGH MAY VARY FROM PLASTIC TO STEEL, ENSURING GREATER STRENGTH.

Shovel-shaped clean out tool. If the chute gets clogged, you can easily remove the snow from the chute assembly.

Tractor-style wheels for amazing grip that allow using full engine power. Wheel size: 13x 4.10–6.

The snow chute is adjustable, and it can be set in many positions. Moreover, the chute features a protection grid to prevent objects from getting in.

ATTENTION: THE ROTATING CHUTE OF THIS SNOWPLOUGH MAY VARY FROM PLASTIC TO STEEL, ENSURING GREATER STRENGTH.