LIGHT series
Useful working width: 100 cm. Suitable for tractors up to 20 HP
The GeoTech Pro LRT series rotary tiller is a light with manual side shift designed for working with medium and small tractors.
Attention: this machine is shipped ready for use. After the assembly, check for bolts loosening and fasten.
Before using this product, please carefully read the instructions manual.
Rotary tiller's features:
Steel hoes:
5 blades attachments
4 hoes each attachment (20 in total)
Focus on the side support of the rotor's fixing by the inside.
Focus on the outer rotor's anchoring, with greaser hole in the middle.
ATTENTION:
All rotary tillers have to work on "clean soil", that is to say without stones and rocks of a size that could damage not only the hoes but in the worst case even the rotor, frame or several transmission components (ball bearings, oil retainers, etc.).
Equipped with manual side shift.
It is possible to move the 3 point hitch along the shift bar by loosing the locking bolts. It will slide along the full rotary tiller's length.
Some positioning examples:
Focus on the setting holes.
Universal type PTO (1 3/8" Z6)
Connections are a universal type for all tractors on the market.
Height adjustable side skids
Movable rear hood with levelling action on the hoed ground
Adjustable hood by means of proper chain
Sturdy oil bath big chain side transmission
Cast iron oil bath sturdy gear box
Universal standard power take-off (1 3/8" Z6)
Universal lifter linkage pins (with two sections diameter each, adaptable to any tractor on market)
Cardan provided as standard equipment is equipped with safety bolt.
The torque limiter shear bolt is designed to protect the machine from damages due to mechanical overload caused by forecasted or excessively high torque. This means if the torque force is higher than the one the bolt can bear, the bolt snaps off. To reactivate transmission, the shear bolt shall be replaced with a new one having the same features.
WARNING!
The machine is shipped ready to use. Once assembled, please check that the bolts are tightened.
The gearbox of this machine can hold no more than 0.5L of oil.
The oil-bath chain assembly may contain no more than 2L of oil.
Please carefully read the instruction manual before using.
The flail mower is shipped on pallet. Only the three point hitch and few other particulars need to be assembled.
Cardan shaft included on package.
Assembly and Instructions Manual.
To change language, please click on the following abbreviations:
