GeoTech GeoPorter 330E B&S CR950 Tracked Power Barrow with Extendable Skip - 300 Kg capacity

The tracked power barrow with extendable barrow with an actual capacity of 300 kg.

Thanks to its own wheels on tracks and to the Briggs & Stratton engine this tracked power barrow can carry loads of 300 Kg also sloping grounds, thus being an indispensable tool for each type of transport.

The sturdy steel frame, the three-speed gear forward and one back and the powerful and reliable Briggs & Stratton CR950 engine make this tracked power barrow versatile and efficient.

It features an extensible barrow which increases the loading capacity of this tracked power barrow.

In addition, another great advantage are the additional removable sides, which allow to obtain an extraordinary versatility of work.

Garden shredder module for Geotech tracked power barrow, to be mounted as an alternative to the barrow.

WARNING: This shredder module is NOT included in the price, available separately as an accessory

Major strengths of this machine:

• Sturdiness thanks to the system with steel rotor.
• Cutting diameter (Reaches without problems 100 mm on green wood, not dry, compared to 80 mm max that are typical for petrol wood chippers);
• Exceptional work capacity , it may face intense and demanding work sessions also constantly grinding large diameter timber at a professional level
• High hourly productivity, well over the classical petrol wood chippers with rotor blades and hammers (can achieve a 4/6 cbm/h productivity)

Limitations: the final dimensions of the wood chips are higher than the average for the lack of centrifugation hammers. The shredder produces fragments of about 4-5 cm and is not suitable to the grinding of leaves or other green material of small dimensions. These wood chippers are specific for chipping of branches of medium and large diameter (compatibly with the maximum cutting diameter indicated on each model), not suitable for small leaves and green material, and less suitable for small diameter branches.

It can also be used for the grinding of the palm tree.

Suitable for models sold after 11/11/2020

The Briggs & Stratton Series 950 engine guarantees high performances and it is suitable for works where high power is required achieved thanks to the high 208 cc displacement

Features:

Brand new 4-stroke engine (overhead valve shaft OHV - recoil ignition ).

Easy re-coil start thanks to the automatic fuel priming system.

The engine is PROVIDED WITHOUT OIL.
Make sure to carefully read the instructions manual before starting the unit.

Rated Power: 7 HP
The correct term would be "Commercial” Power, meaning the classic standard of definition of power officially used until a few years ago by all leading engine manufacturers.

* This figure is even more widespread and advertised in the leading commercial channels, although it is a matter that it is higher than the actual power.

Effective power: 4.70 HP (a rotation speed of 2600 rpm)
It corresponds to the real power expressed motor shaft. This is the power indicated as official in the manual or in the technical data of the motor manufacturer.

* This technical data may vary for the same engine model depending on the rotational speed supplied by the engine applied to the equipment.

Gearbox: Large, reliable and accurate.

Speed:
3 forward
1 reverse

Parking brakes:
annexes to the gearbox, for greater stability and security.
These are automatically activated to release the command (leaving the car in neutral, even in strong gradient, the machine remains perfectly blocked)

Transmission:
Robust and resistant, it allows to manage the steering acting on the single track deactivating the rotation

The machine is supplied by the manufacturer with transmission oil level. Anyway, oil levels must ALWAYS be checked before operating the unit as specified in the instruction and maintenance manual.

With their width and tread profile they guarantee perfect grip and stability on all types of terrain. Made of special reinforced rubber with excellent grip, they are able to tackle any type of surface or step.

The track at rear angle greater pointy "tank type" allowing him to climb easily even on stairs or other types of obstacles.

The robust frame with steel structure in high thickness which limits the vibrations and noise. The low center of gravity also ensures an optimal stability during the work the position of the engine and the transmission facilitates maintenance

Adjusting the track tension thanks to the tension springs.

Body in high-strength steel, is reinforced with tubular cross members in the lower part, which make it suitable for any load or stress. The loading platform is at the minimum distance from the ground to facilitate loading / unloading operations

Mechanical tipping: manually activated with the appropriate rubber-coated release lever with spring, and facilitated (in case of heavy loads) from the long lifting tipping lever placed on the side .

To facilitate the tilting operation, discharging the weight of the operator, and to keep it in the tilted position the barrow, the tracked power barrow is provided with gas piston placed under the frame.
In this way all the phases of the work will be much facilitated.

The loading capacity can be increased significantly due to extensible sides.
In addition to classic wing nuts placed under the barrow, the tracked power barrow is provided with sturdy hinges with quick release which ensure the sides to one another.

Another solution that allows to further increase the load capacity is the provision of overlays removable .

An example of use is for the transport and the loading of the wood.
By using the overlays you have the ability to increase the load greatly and still reduce the number of transport to be carried out for the job.

Useful barrow dimension 90x60 cm

Control: easy to operate and ergonomic, they offer precision and controllability in the work

Large red lever for motion activation .

The two lower levers are for the steering, respectively right and left .

The steering is modulated as a function of the control lever and allows it to move smoothly. By partially pulling one or the other lever also the steering of the affected track, right or left, will be partial.
This allows the steering of the tracked power barrow in an extremely easy way, without causing any sudden movements.

Safety brake that allows the immediate arrest.

Accelerator lever and mains supply interruption switch.