Spare Parts + After-Sales Assistance
5% off
from the 2nd item
Prompt Delivery +
Free Shipment

Eurosystems Euro 102 Diesel Garden Tiller powered by diesel engine, gear transmission

Standard milling cutter width
95 cm
Max. extension
600 m²
Motor type
Diesel
Motor brand
other brands
Engine Model
D178F
Cubic Capacity
296 cm³
Rated output
7 HP
Transmission type
gear transmission in oil bath
Gears
3+1
Manufacturing Country
Italy
Pressure reducing system
Automatic
FREE:
FREE:
€ 1.429,17
VAT Included
Prompt Delivery
4 items in stock
|
Free Shipping
You should receive it by 05/11/2020
ID: K4029
EAN: 8025004009776
MPN: 00945551700

Eurosystems Euro 102 D Garden Tiller

This garden tiller consists of a diesel engine and a sturdy oil bath gearbox having 3 forward gears and 1 reverse gear.

The Garden Tiller Euro 102 D is also suitable for tilling works requiring quite high difficulty level and it is known to be highly efficient for more demanding tilling works on hard soils that have not been necessarily turned over yet.

It is 110 Kg weight: this feature represents an important advantage because it allows the machine digging deeper into the ground and turning over the soil preparing it for the milling operations.

Therefore, it is ideal for all those users having quite large-sized plots to work or they have to deal with the milling of hard and stony soils: they will find out the utility of this machine in a very short time (since a garden tiller with a smaller size or having a less sturdy transmission like the drive belt is not able to work as effectively).

A diesel engine is a quality assurance (having a higher quality level compared to the low-powered petrol engines). It allows the machine to even work by selecting high gears. This working method lets the milling cutters to turn faster avoiding excessive engine efforts. It also ensures limited consumptions and, more in general, low costs and low maintenance requirements.

Diesel Engine 296 cc

Features:

Engine type
Single-cylinder 4-stroke
Cubic capacity
296 cm³
Power
7 hp



In addition, this engine type also consists of a front bumper.


 ATTENTION!

The engine is PROVIDED WITHOUT OIL.
Please carefully read the instructions manual before using it.

Gearbox and Transmission in the machine upper section

The garden tiller consists of one of the best quality gearbox available on the market having 3+1 gears and with a gear transmission designed for this category garden tillers.

It shows some main features. It is possible to describe them as follows:

  • Size and sturdiness, which can be also observed on first glance by looking at them;
  • Gears annealing in the upper section;
  • Gearbox precision in its work of changing gears;
  • Exactness gears design.

It consists of 3 forward gears and 1 reverse gear, which become operable by means of the lever on the handles.

Two power take-offs

The machine consists of 2 different types of power take-off, which are on the back of our garden tiller and they are easily accessible to the user. Indeed, you just have to remove the rubber stoppers to make them ready to work.


Normalized power take-off
(Its turning is constant even when the transmission is placed in neutral. This normalized power take-off is ideal to activate additional equipment, which can be linked to the power take-off).

Gearbox power take-off
(It is suitalble for towing operations like the possibility to add a trolley with traction wheels to the garden tiller, although it will not be conformed to the road regulations existing nowadays).

Transmission in oil bath

The transmission is known to be one of the sturdiest available on market.

It is realized by pinion and crown in oil bath.

The transmission large size and its sturdiness make it even suitable for hard works requiring the milling of difficult soils.

It is fully realized by oil bath gearbox. An additional advantage is that it does not require any maintenance (you just have to take under control the oil level after a quite long period.

 ATTENTION!



WARNING! Please check gearbox oil level before starting the unit.

Adjustable tine from 95 cm to 65 cm

Heavy-duty hexagonal tine mounted on the central cylinder. It consists of 6 elements, each of whom has 4 steel rotary hoes.

Tine standard size: 95 cm

The tine of this diesel machine is adjustable and the process to reduce its width up to 65 cm is extremely easy and fast: you just have to remove the 2 outermost elements and to replace the specific side shields.

In addition, it is also possible to purchase the milling cutter enlarging attachments, which allow to increase further its 95 cm standard size up to 125 cm width having side shields to protect plants and small bushes from impacts due to milling operations.

Adjustable stake

The rear stake is height adjustable and it can provide 2 different resolutions: either unmovable or rotary stake.

The image on your right shows it in its standard position.

However, it is possible to assemble it in its reverse position (with the forward-facing warp) in order to work hard or difficult to work soils, which have been never turned over before.

Adjustable handles and controls

The handlebars are height and side adjustable thanks to the specific double regulating device made of cast steel.

The controls are the following:

  • Red lever on top: clutch lever, which activates the machine according to the gear that has been previously selected;
  • Low lever on the right: it is responsible for the machine moving backward since it activates the reverse gear;
  • Throttle lever.
Product Features
Model:
Euro 102
Type:
gear transmission in oil bath
Activation:
spark ignition
Max. extension:
600 m²
Start:
Recoil
Soil consistency:
Hard
Manufacturing Country:
Italy
Motor data
Motor/Engine brand:
Excalibur
Engine Model:
D178F
Motor type:
Diesel
Cubic Capacity:
296 cm³
Number of pistons:
1
Rated output:
7 HP
Real power:
5.5 HP
Fuel:
Diesel
Power supply:
Injection
Engine lubrication type:
Oil bath
Pressure reducing system:
Automatic
Manufacturing Country:
China
Transmission data
Transmission type:
gear transmission in oil bath
Number of forward speeds:
3
Number of reverse speeds:
1
Gears:
3+1
Actioning :
Gear lever
Series transmission:
medium-heavy (3+1)
Cutting data
Standard milling cutter width:
95 cm
Short milling cutter width :
65 cm
Auger screw diameter:
34 cm
Number of blades supports:
6
N° of blades:
24
Blade engagement:
Lever on the handle
Equipment
Tiller/Cultivator accessory:
included
Iron spade lug wheels:
Yes
CE compliant safety features:
Yes
Safety lever moving backward:
yes
Transport wheel:
no
Rear stake:
yes
Adjustable stake:
yes
Furrower:
On request
Standard plough:
no
Swivel plough:
No
Milling cutter extension elements:
on request
Side transport wheel torque:
On request
Pair of Tractor wheels:
On request
Iron wheel torque:
no0
Roller torque for lawn trimmers:
On request
Scarifier springs:
no
Scarifier blades:
no
Clutch:
conical dry clutch
Power take off:
2
Electric key start:
No
Recoil Starter (cord):
Yes
Height adjustable handle:
Yes
Side adjustable handle:
Yes
Rubber-coated soft grip:
Yes
Foldable/collapsible handlebar/s:
Yes
Free gifts/extra features
Engine maintenance kit:
No
Free engine oil bottles :
2
Maintenance tool kit:
No
Diesel filter:
no
Instructions manual:
yes
Dimensions and logistics
Net weight:
110 Kg
Packaging:
On pallet
Packaging dimensions cm (LxWxH):
100 x 64 x 104 cm
Gross weight (packaging incuded) :
120 Kg
Assembly time:
30 minutes

Free gifts / Extra features

The garden tiller is sent to you on its original packaging.

Instructions manual included in the package.

FREE GIFT

2 bottles of 1 L synthetic oil 10W40

The engine does not come oil furnished. Please, fill the specific tank before start using it for the first time.

The machine is sent to you almost fully assembled (80%). You just have to complete the last assembly procedure, which includes the handles and the milling cutter assembly.

ASSEMBLY TIME: 15 minutes.