Spare Parts + After-Sales Assistance
5% off
from the 2nd item
Prompt Delivery +
Free Shipment

Electric transfer pump Rover 30 CE , 0,9 hp motor, wine and water electric pump

Manufacturing Country
Italy
Motor type
Induction
Rated output
1 HP
Material
Bronze
Pipe fittings (joints) diameter
30 mm
Head lift
20 mt
Maximum suction depth
5 m
FREE:
FREE:
€ 114,92
VAT Included
Prompt Delivery
35 items in stock
|
Free Shipping
You should receive it by 05/11/2020
ID: 0351
EAN: 8032706071444
MPN: 965000

Rover 30 transfer pump

Rover 30 electric transfer pump is powered by 0,9 HP motor. It is a self-priming and bi-directional pump.

It is the typical self-priming and bi-directional pump with a side liquid ring equipped with a radial impeller. This special discover in the hydraulic field allows a good suction even in absence of a continuous flow of the liquid in suction (air or other gases in the flow).

It is intended for transferring liquids for agricultural, enology, nautical and gardening uses. The liquids to be transferred must be neutral and clean or must have a percentage of solids (0,2-0,5% max) with hardness and granulation which do not damage the inner surface. Could be useful to use a fine woven mesh filter mounted on the suction pipe. Some examples of liquids: water, wine, milk, grape must, liquid cleaners, diesel and glycol.

These pumps are not suitable for oil transferring. For pumps suitable for oil transferring, please check the specific category in the list.

General features

Joints: Ø 30 mm.

Body pump made of high quality bronze.

The pump is "self-priming": it will handle any liquid when switched on by just adding some liquid inside the impeller before using.

Bi-directional: it can pump liquids in both directions. In this way is possible to transfer liquids carefully, make adjustments and pump liquids in the opposite direction if necessary. Use the rocker switch to set flow direction.

Sturdy electric motor: 0,9 Hp.

Max output: 83 L/min.

Max operating pressure: 2,0 bar.

Hydraulic head: 15 m.

Upper handle for easy transport.

Product Features
Model:
ROVER 30
Typology:
Self-priming
Deck Material:
Bronze
Activation:
Electric - 230 V
Rotation:
Bi-directional
Manufacturing Country:
Italy
Motor data
Motor type:
Induction
Rated output:
1 HP
Motor Speed (RPM):
2850 RPM
Power supply:
220V power supply
Manufacturing Country:
Italy
Pump data
Material:
Bronze
Pipe fittings (joints) diameter:
30 mm
Flow Rate:
75 lt/min
Head lift:
20 mt
Maximum suction depth:
5 m
Manufacturing Country:
Italy
Equipment
Handle for lifting the machine:
Yes
Free gifts/extra features
Instructions manual:
yes
Dimensions and logistics
Product dimensions cm (LxWxH):
(L x W x H) 310 x 150 x 210 mm
Net weight:
10 Kg
Packaging:
Original packaging
Assembly time:
2 minutes

Free gifts and extra features

The pump is shipped in its original packaging with instructions manual included.