The Dal Degan DK 200 backpack combustion mist blower is an ideal solution for those looking for a high-performance product for heavy-duty and intensive work. Equipped with a super-professional 80 cc engine, this mist blower offers an effective power output of 5.0 HP, the highest in its class.
Equipped with a booster pump placed between the backpack and the engine, this sprayer allows spraying at higher heights thanks to the boost produced by the pump. It will therefore be much easier to carry out treatments even on taller plants and trees.
The chrome-plated cylinder and high-speed bearings guarantee reliability and durability, making it suitable for extended use.
The 80 cc displacement is the highest in its class, ensuring superior performance and greater efficiency in use. With an effective power of 5.0 HP, this mist blower can tackle the most demanding jobs without difficulty.
The professional high-performance ventilation system provides a super airflow of 17.4 cubic meters per minute, ensuring even and powerful distribution.
The diaphragm carburettor optimises fuel consumption and improves overall performance. The reliability and durability of the engine are at the highest level, thanks to the robust construction and high-quality materials used.
The maximum air speed reaches 86 m/sec, equivalent to 310 km/h, ensuring effective coverage of the work area.
The Dal Degan DK 200 backpack combustion mist blower is characterised by:
- Engine displacement: 80 cc, the highest in its class.
- Effective power 5.0 hp, the highest in its class.
- Super air flow: 17.4 cubic metres per minute.
- Maximum air speed: 86 m/sec (310 km/h)
- Diaphragm carburettor: to optimise consumption and improve performance.
- Robust construction: chrome-plated cylinder and high-speed bearings for maximum reliability and durability.
WARNING:
this atomiser is specifically designed for the treatment of fruit plants whose height never exceeds 4 / 5 metres, with rare exceptions (e.g. palm trees or a few other species). This is why the maximum height of the spray jet is suitable for carrying out maximum treatments at these heights (the specific data for this model of mist blower is specified on this page in the data sheet table), also because conceptually all mist blowers are designed with the liquid passing from the tank to the nozzle located at the air jet outlet ‘by gravity’, so the tip of the dispensing arm and the nozzle must never exceed the height of the tank otherwise the flow of the solution is interrupted. It is therefore possible to hold the sprayer's nozzle arm tilted upwards to carry out the treatment (reaching the above-mentioned heights), but it is not possible to tilt it too vertically as this would stop the flow of solution to the nozzle. If you have tall trees or for any other treatment at a higher height than the above (for which the nozzle arm would have to be raised to a more vertical position), you need to purchase specific models equipped with a ‘booster pump’, which would perform the specific task of pumping the liquid up to the nozzle head of the nozzle arm even when the latter is in a vertical position (and therefore with the nozzle at a higher height than the main solution tank).
