DAL DEGAN HEAVY-DUTY BACKPACK MIST BLOWER mod. DK 200
The following features make this backpack atomizer among the top of the range on the market:
- DISPLACEMENT: 80 CC
- EFFECTIVE POWER: 5.0 HP
INNOVATIVE FEATURES:
- Highly-professional engine at high rpm, suitable for the most intense and heavy-duty jobs (chrome cylinder, high-speed bearings, membrane carburetor);
- Highly reliable and long-lasting;
- Engine DISPLACEMENT: 80 cc (the highest displacement of this category);
- EFFECTIVE power: 5.0 hp (the highest ever of this category);
- HIGH AIR FLOW: 17.4 cubic metres per minute, large ventilation system (heavy-duty, high performance);
WARNING:
This mist blower is specifically designed to treat fruit trees whose height never exceeds 4/5 metres, with rare exceptions (e.g palms or a few others). For this reason, the maximum height of the spray jet is suitable to carry out treatments up to these heights (the specific data of this model of mist blower is specified in the technical “datasheet” section), also because all the mist blowers are designed to pass the liquid from the tank to the nozzle placed at the end of the air jet by gravity, so the tip of the lance and the nozzle must never exceed in height the tank, otherwise the flow of the solution stops. It is therefore possible to hold the lance inclined upwards to carry out the treatment (reaching the above-mentioned heights), but it is not possible to incline it too vertically because the flow of the solution to the nozzle would stop. In case of tall trees or for any other treatment at a height higher than the above (for which it would be required to lift the nozzle lance in a more vertical position), it is necessary to purchase specific models equipped with a "booster pump", which would perform the specific task of pumping the liquid up to the head of the nozzle of the lance even when it is in a vertical position (and therefore with the nozzle in a higher position than the main solution tank).
