Hills with trees
Cutting weed
Spare Parts + After-Sales Assistance
5% off
from the 2nd item
The 30-day free return
HOME Brands Ceccato Olindo Wood Pellet Machines

Wood Pellet Machines Ceccato Olindo

Wood Pellet Machines Ceccato Olindo PURCHASE DIRECTLY FROM (no other dealers) ► HIGHEST-QUALITY BRANDS ONLY (no unknown brands) ► AFTER-SALES ASSISTANCE + SPARE PARTS

Whole range of 4 Wood Pellet Machines Ceccato Olindo models, offered for sale from € 3,864.64 , in Prompt Delivery and Free shipping . Purchase directly from AgriEuro with no third parties nor unwanted surpreses: compared to the other online markets, who rely on third dealers (it means no assistance nor warranty), we offer Direct and Complete Assistance, which starts from pre-sales service up to after-sales assistance. The items are directly shipped from our AgriEuro distribution centre. Thus, we are the only online seller providing After-Sales Assistance for the Wood Pellet Machines Ceccato Olindo products and supplying Spare Parts (you access the exploded drawing once entered your Account).

filtri
No filter selected

The best Ceccato Olindo wood pellet machines on offer at AgriEuro

The best Ceccato Olindo wood pellet machines on offer at AgriEuro

Ceccato Olindo wood pellet machines turn finely prepared wood chips into pellets intended for compatible stoves and boilers. They complete the work performed by a wood chipper: pruning residues are first reduced to an even size and then compressed through the die. These machines meet the needs of families, farms and professional operators who have access to the raw material and wish to organise production directly. The range includes single-phase and three-phase electric models, as well as machines powered by the tractor PTO.

Ceccato Olindo is an Italian company originating from the business activities started by the Ceccato family at the end of the nineteenth century. Over the decades, the brand has expanded its experience in agricultural, forestry and gardening machinery, developing a range also intended for professional operators. Production is concentrated at the company complex in Arsego, which includes two factories covering a total surface area of 5,000 m². The wood pellet machines are designed and manufactured in Italy, with solutions complying with EC occupational safety regulations.

This selection also includes the following types of Ceccato Olindo wood pellet machines, divided according to their power source and operating context:

Technical features of Ceccato Olindo wood pellet machines

At AgriEuro, Ceccato Olindo wood pellet machines can be selected according to their technical features, helping users identify the machine best suited to the available power supply, quantity of material and planned work rate. The main parameters to consider are:

  • operating mode: the range includes 230 V single-phase electric motors, 400 V three-phase motors and PTO transmission connected to the tractor power take-off;
  • power: the electric models are offered with different power ratings, including 3 HP, 5.5 HP and 7.5 HP; the PTO version requires a tractor compatible with the machine specifications;
  • output capacity: hourly output varies according to the model, power supply and material conditions; the machines in the range provide an indicative output of approximately 30 to 80 kg/h;
  • pelletising unit: a rotating flat die and two press rollers compress the material, producing pellets with a nominal diameter of 6 mm;
  • hopper and discharge: the prepared material is loaded from above through the hopper; the finished pellets leave the machine through the side discharge chute;
  • raw material: the wood chips must be small, even and compatible with the die; particle size and moisture affect extrusion continuity and pellet compactness;
  • handling: wheels and a handle assist with positioning the electric models; the PTO version includes the components required for connection to the tractor;

Single-phase models suit a hobby or domestic level, such as the periodic preparation of pellets for household requirements. Three-phase and tractor-mounted versions suit a professional level, including farms, forestry activities and operators planning more intensive work cycles. The choice must also consider the availability of a suitable electrical connection or tractor and the ability to prepare wood chips consistently.

Types of Ceccato Olindo wood pellet machines

The different configurations share the same wood-chip compression process but differ in power supply, power rating and output capacity. The choice depends on the available electrical system, access to a tractor and the quantity of pellets planned for each session. Comparing the three types helps match machine performance to the actual operating context.

Electric single-phase wood pellet machines Ceccato Olindo

Electric single-phase wood pellet machines Ceccato Olindo are designed for premises supplied by a standard 230 V electrical system. This configuration allows the machine to be installed in a home workshop, suitable garage or business premises without a three-phase connection. The 3 HP model features an induction motor and flat die, with top loading through the hopper and side pellet discharge. Its indicative output of 30-40 kg/h is suited to periodic cycles and volumes compatible with household requirements. The material must reach the machine already reduced to a fine and even size. Accurate preparation limits blockages and interruptions during extrusion. Wheels and a handle facilitate movement across the working surface, although the machine must still be correctly positioned on stable ground. Before purchasing, check the power available from the electricity meter and the suitability of the electrical circuit.

This type has the following operating features:

  • 230 V power supply: allows connection to a correctly sized single-phase electrical circuit;
  • 3 HP motor: drives the pressing unit at a rated speed suitable for domestic production;
  • indicative output: the reference model produces approximately 30-40 kg/h when the material is in suitable condition;
  • 6 mm pellets: the die forms cylinders with a nominal diameter suitable for the applications indicated by the manufacturer;
  • wheeled handling: the mobile frame makes it easier to reposition the machine after work;

Electric three-phase wood pellet machines Ceccato Olindo

Electric three-phase wood pellet machines Ceccato Olindo require a 400 V supply and are intended for users planning more frequent processing or larger quantities than those suited to the single-phase version. The range includes 5.5 HP and 7.5 HP motors, with different corresponding hourly output values. The 5.5 HP model can produce approximately 60-70 kg/h, provided that the particle size and moisture content are suitable for extrusion. The pair of rollers presses the wood chips and pushes them through the flat die, producing 6 mm pellets. The top hopper and side discharge chute organise the loading and collection stages. This configuration is suitable for farms, workshops and professional operators with a three-phase system. Before installation, check the available power, electrical protection devices and the requirements stated in the manual. The machine must be placed on a stable surface in premises suitable for the planned work.

The main aspects of the three-phase configuration are:

  • 400 V power supply: requires a three-phase electrical system suitable for the rated power of the machine;
  • different power ratings: the 5.5 HP and 7.5 HP versions allow selection according to the planned production rate;
  • higher hourly output: the increased power supports larger quantities than the single-phase model, within the values stated in the individual technical data sheet;
  • induction motor: provides electric drive suited to scheduled professional sessions;
  • mobile structure: wheels and a handle assist with movement within the working area;

Tractor-mounted wood pellet machines Ceccato Olindo

Tractor-mounted wood pellet machines Ceccato Olindo use the tractor power take-off and do not have an independent motor. Connection is made through the cardan shaft and three-point hitch, following the procedures specified by the manufacturer. The Magic PTO version operates with a power take-off of up to 540 rpm and requires a power rating compatible with the machine data plate. Indicative output can reach 70-80 kg/h, depending on wood-chip preparation and operating conditions. This solution is intended for farms that already own a suitable tractor and wish to work close to where the material is stored. The flat die and press rollers perform the same compression stage found on the electric models. Material is loaded from above and pellets are discharged from the side. Before starting work, check PTO compatibility, cardan shaft guards, connection stability and safety requirements.

The tractor-mounted configuration has the following features:

  • PTO drive: power is supplied by the tractor PTO through the cardan shaft connection;
  • maximum speed of 540 rpm: this value must be observed according to the model's technical specifications;
  • required power: the tractor must be compatible with the requirements of the wood pellet machine and the specified hitch;
  • indicative output: the reference version can process approximately 70-80 kg/h with correctly prepared wood chips;
  • agricultural application: the machine integrates into the equipment fleet of operators who already own a tractor and wood chipper;

Why buy from AgriEuro

AgriEuro supports the selection of a wood pellet machine with technical data sheets, configuration details and information for comparing models. After ordering, dedicated logistics and support services assist with the different stages associated with the machine:

  • fast and free shipping: handled by AgriEuro logistics centres, including order preparation and dispatch, with clear delivery-status information and methods suited to machines of considerable weight and size;
  • option to order spare parts: spare parts are always available through the dedicated service, helping users identify and purchase the correct components for their machine;
  • after-sales assistance: attentive, personalised support helps identify the correct procedure for technical questions, component requests and work required after delivery;

Purchase from AgriEuro the Ceccato Olindo wood pellet machine best suited to your available power source and planned workload.

FAQs about Ceccato Olindo wood pellet machines

1. How does a Ceccato Olindo wood pellet machine work?

The machine compresses fine wood chips through a rotating flat die. Two press rollers push the material through the die holes, forming cylindrical pellets that leave through the side discharge chute. Material is loaded from above through the hopper. Before processing, the wood must be reduced to a small, even size and have a suitable moisture content. The power source depends on the configuration: a single-phase electric motor, three-phase electric motor or tractor PTO.

2. What is the difference between a single-phase and three-phase wood pellet machine?

The main difference concerns power supply, motor power and hourly output. The single-phase version operates at 230 V, features a 3 HP motor and is intended for domestic production, with an indicative output of 30-40 kg/h. Three-phase versions require a 400 V supply and provide higher power ratings suited to professional work. A 5.5 HP three-phase model can produce approximately 60-70 kg/h. Before choosing, check the available electrical system, contracted power and the specifications of the individual model.

3. When should a tractor-mounted wood pellet machine be chosen?

The tractor-mounted version is suitable for operators who already own a compatible tractor and process substantial quantities of wood chips in an agricultural setting. The machine receives power from the PTO through the cardan shaft and three-point hitch, so it does not require an independent motor. The Magic PTO supports up to 540 rpm and can produce approximately 70-80 kg/h. PTO compatibility, tractor power, cardan shaft guards and correct coupling must be checked before every session.

4. What material can be loaded into the wood pellet machine?

The machine must be supplied with finely shredded wood chips prepared according to the manufacturer's instructions. Whole pruning residues cannot be loaded directly, and coarse wood chips are unsuitable for the die. A wood chipper with a refining screen should be used to obtain small, reasonably even particles. Foreign objects, treated materials and substances not specified in the manual must not be introduced, as they could damage the die and rollers and affect the result.

5. How fine and moist should the wood chips or sawdust be?

Particle size and moisture must remain within the values specified for the model and raw material. For Ceccato Olindo machines, AgriEuro recommends small, even wood chips, which may be obtained through a second pass using a suitable screen. Material that is too coarse can obstruct the die feed; incorrect moisture can produce crumbly pellets or uneven extrusion. Before processing a substantial batch, check the material with suitable instruments and perform a limited test while following the manual.

6. How many kilograms of pellets can be produced per hour?

Indicative output ranges from approximately 30 to 80 kg/h across the machines considered. The 3 HP single-phase model produces about 30-40 kg/h; a 5.5 HP three-phase version can reach 60-70 kg/h; and the PTO machine can reach approximately 70-80 kg/h. These figures are not automatic output rates: wood species, particle size, moisture, feeding consistency and die condition affect the actual result. Compare the technical data for each model with your own material-preparation process.

7. What diameter are the pellets produced?

The configurations described produce pellets with a nominal diameter of 6 mm and an indicative length of 25 to 35 mm on the reference models. Diameter depends on the holes in the fitted die; cylinder consistency depends on raw-material conditions and correct adjustment of the pressing unit. Before using home-produced pellets in a stove or boiler, check the appliance manual to confirm that the pellet size, composition and quality are compatible with the combustion system.

8. Is a wood chipper required before using the wood pellet machine?

Yes. When starting from branches and pruning residues, a machine is required to produce sufficiently fine and even wood chips. A first pass reduces the material; a possible second pass with a refining screen brings the particle size closer to that required by the wood pellet machine. The wood chipper and pellet machine therefore perform different consecutive functions. Before purchasing, check that the available chipper accepts a suitable screen and that its output complies with the limits in the Ceccato Olindo documentation.

9. What maintenance does a wood pellet machine require?

Maintenance includes cleaning the die, checking the rollers and removing residues according to the intervals and procedures in the manual. At the end of the session, stop and secure the machine before carrying out any work. Check the condition of components subject to pressure, guards, electrical connections or the cardan shaft, depending on the version. The extractor supplied with some models assists with removing the die for cleaning. Adjustments, lubrication and replacement work must follow the manufacturer's instructions.

10. Which safety checks are required before starting?

Before starting, check the stability of the machine, integrity of the guards and absence of foreign objects in the loading area. For electric models, check the voltage, available power and suitability of the electrical system; for the tractor-mounted version, inspect the three-point hitch, guarded cardan shaft and PTO speed. The operator must wear the required personal protective equipment and keep unauthorised persons away from the working area. Cleaning, clearing blockages and adjustments must only be performed with the machine stopped, following the manual.