BullMach Hercules 50 L - Petrol-powered shredder - Loncin H200 196cc engine

The BullMach Hercules 50 L shredder is designed for shredding medium-diameter branches and logs, ensuring a significant reduction in the volume of plant waste. This machine is suitable for green maintenance work, allowing biodegradable residues to be removed and chipped quickly and effectively.

This model is distinguished by:

• Structural robustness thanks to the steel rotor system, which ensures high resistance to prolonged stress.
• Large cutting capacity, with a maximum working diameter of up to 50 mm, suitable for medium to thick branches.
• Excellent working ability, designed to cope with heavy and continuous sessions, grinding large diameter woods with professional performance.
• High hourly productivity, superior to conventional burst shredders equipped with blade rotors and hammers, thanks to the optimized shredding system.

The BullMach Hercules 50 L proves to be an efficient and robust tool for demanding work, ideal for those who need to chop thick branches and achieve high hourly output.

Warning: Like all wood chippers and garden shredders, it is not suited for shredding grass, leaves, pine needles, etc. (it is intended to shred branches, but it can also grind leaves, needles and other vegetation that may be attached to the branches)

Garden shredders intended use:
- The wood chipper must grind only green branches, recently cut from the tree and not dried ones (which would limit its shredding capacity and lead to quick deterioration of the blades);
- The branches must be preferably long, smooth and not knobby (otherwise the cutting diameter would be reduced);
- The declared cutting diameter is the maximum, so in use, it is the exception and not the rule. In this case, it would be better to purchase a shredder with a larger branch cutting diameter;
- The cutting diameter can vary according to the consistency of the wood (e.g: oak, olive, plum and peach are hard woods and can reduce the cutting capacity of the wood shredder);

Features:

Details of the On/Off engine switch

This shredder, like all petrol shredders with roller rotor, must be strictly used at maximum engine speed; the shredding rotor is large and must reach the maximum speed to ensure high results by harnessing its centrifugal force.

Nominal Power: 6.5 Hp
The correct term would be "Commercial” Power, meaning the standard definition used until a few years ago by all well-known engine manufacturers.

* This technical feature is the one indicated in the main sales channels, even if it is higher than the real power of the engine.

Rated power: 5.5 Hp
It refers to the real power of the engine. This is the power indicated as official in the engine instructions manual.

* this is a figure that can vary for the same engine model depending on the rpm the equipment manufacturer has decided to have the applied engine deliver

WARNING!

The engine is PROVIDED WITHOUT OIL.
Read the instruction manual carefully before start-up.

The machine is provided with centrifugal clutch. It is important to let the engine running at high speed in order to ensure a proper functioning.

UNIFIED HOPPER: considerably speeds up shredding operations.

The single hopper eliminates the constant operation of dividing (prior to grinding) the material between the large, woody sections and the smaller, green sections, each of which must be placed in its own hopper (an operation required by all classic shredders equipped with 2 hoppers).

SELF-FEEDING: Once introduced the branches into the hopper, the shredder draws them inside the shredding chamber autonomously.

SAFETY DEVICE: you can use the device placed all around the hopper. In an emergency, in fact, a slight pressure can be applied to the device with the hand to immediately stop the function of the shredder.

The shredder can be checked for maintenance.

Large and highly-thick 2 shredding blades mounted on a steel spinning roller.

The double-blade system is completed by the counter-blade in the shredding chamber.

Inner blade-holder rotor with shaft made by balancing operation.

All roller shredders like this one allow high performance by entering leafless and cleaned branches (not thick and with too twigs);
they are ideal for quite large branches and not for many thin or green branches featuring many twigs; this is because the roller system is technically unsuitable for grinding small diameters branches, or green material in general, while they really give their best with larger branches.
This is due to their less "centrifugal" power compared to standard disc and blade models, and to the "greater distance between blade and counter-blade", designed for single branches that are already well cleaned but with a large diameter.

Adjustable exhaust outlet located approximately one metre above the ground, equipped with a deflector with adjustable inclination.

The Bull Mach Hercules 50 L shredder has been equipped with a double handle to make it easier to move the machine.

The wood chipper is also provided with large pneumatic wheels that ensure easy transport.