Airmec TEB22-620HO Petrol Engine-driven Air Compressor (620 L/min) with Honda GX 200 Engine

The Airmec TEB22-620 HO petrol engine-driven air compressor is designed to power and operate pneumatic tools for pruning and harvesting in the agricultural sector.

The TEB22-620 HO is equipped with the best components, the NuAir NB 4 pumping unit is driven by a powerful 4-stroke HONDA GX 200 petrol engine.

The engine-driven air compressor is mounted on a sturdy frame that connects the two self-supporting tanks with an impressive 11 L each.

This air compressor features a smart automatic throttle system, thanks to which the engine automatically adjusts its acceleration level based on the air intake of the equipment used.

When the other equipment is not used, the engine will have lower rpm, and when it is switched on again, the engine will accelerate to deliver the air production necessary for its operation.

Its large pneumatic wheels and a comfortable handle facilitate transport and movement during work sessions. Practical and easy to handle thanks to its extremely compact dimensions.

This air compressor supports the use of 3 olive harvesters, 6 pruning shears and 1 chainsaw.

The TEB 22-620 HONDA engine-driven air compressor is equipped with one of the best engines on the market: Honda GX 200

Cubic capacity: 200 cc
Highly-professional series
Extremely powerful latest-generation overhead valve technology.

The Honda “GX” series is designed for highly-professional use in building and agricultural field for generators, welders and many others, standing out for the high reliability and durability over time.

Many engine-driven air compressors the market, on the other hand, are fitted with Honda “GP” series, which was developed for hobby and more limited operations and features a lower quality to the former and is cheaper.

Engine-driven air compressors run for days on end, so they need reliable and sturdy motors.

Recoil start

Heavy-duty twin-cylinder head with cast iron cylinders

Original NUAIR branded (620 L/min)
- MADE IN ITALY -

Header model - NB 4 twin-cylinder with 2 cast iron cylinders

The highly professional top quality head unit is intended for heavy-duty continuous work.

This head unit is twin-cylinder with cast iron cylinders and guarantees long service life.

High air output: 620 L/minute of suction air, enough to guarantee the operation of 3 harvesters, 6 pruning shears 1 and a pneumatic chainsaw.
The highly professional top quality head unit is intended for heavy-duty continuous work.
Header equipped with a double cooling collector (one on the right and one on the left header), for more effective cooling of the included air produced before it is fed into the tank.

Head working at low rpm for truly exceptional durability.
The only one on the market equipped with an enamelled steel belt guard.
Truly indestructible ensuring long-service life.

All engine-driven air compressors on the market, on the other hand, still fit the traditional metal grid, which tends to loosen and desolder with vibration over the years.

Double tank (11 + 11 L).
The two tanks give the air compressor two advantages over other models equipped with a single tank:

a) Greater air reserve

b) Greater air cooling with consequent more efficient separation of condensate from the air that then feed the equipment.

*When air is pumped from the air compressor cylinder head, it is fed into the tank at a very high temperature.
The more the air tends to cool, the more the condensation will tend to separate and settle at the bottom of the tank (which must then be emptied at the end of each day by means the proper tap).
The absence or reduced moisture in the air that feeds the equipment (harvesters, pruning shears, chainsaws) will drastically reduce the problems of freezing inside them, resulting in more efficient operation and longer life of the equipment over the years.

No load operation system and maximum pressure control by means of professional pilot check valve.
Heavy-duty aluminium condensate separation filter with lubricator - MADE IN ITALY -

All these parts are mounted on a sturdy forged aluminium support.
Three outlets equipped with female quick couplings.

One-piece transport handle: very convenient because it allows the Operator to conveniently pull the compressor behind him with one hand (instead of pushing it forward).
It can be quickly removed for transport and storage.

Pneumatic wheels with air chamber 3.00 - 4 (mm 260x85).
Anti-vibration rubbers at the base of the frame.

This engine-driven air compressor can be fitted with a hose reel (the mounting bracket for attaching it above the air compressor and, of course, the hose reel itself must be purchased separately).

DIMENSIONS:

Height: cm 70
Width: cm 68
Length: cm 83 (without handle)

Weight: 72 Kg