Description

Twist Standard olive harvester

Twist Standard is the first electric olive harvester on the market with opposite motion (new swinging and opposite system with beating prongs made of heavy-duty carbon). This patented system reduces vibrations while working and improves the performances as it can even harvest the hardest olives which will fall down inside the perimeter of the tree.

The olive harvester is equipped with a 2 m pole that can be extended of up to 3 m by connecting the extension pole provided on standard kit at the bottom of the fixed pole.

Twist Standard olive standard is intended for any type of olive and tree, even for olive trees ready for mechanical harvesting. For this reason, it is suitable both for well pruned and thick trees placed on level grounds or hills. It has been designed in order to suit any working condition. It guarantees high performances and it does not damage the olive nor the branches and it respects the tree. Concerning this feature, it is a state-of-the-art product.

PRODUCT COLOUR MAY VARY DEPENDING ON THE PROVIDER

Aima Twist Standard Battery-powered Electric Olive Harvester 210-310 cm - Aluminium Pole + Extension Pole

Innovative opposite motion

Each carbon prong moves by swinging sideways and by crossing each other’s. In this way, the performances are improved and you can harvest even the hardest olives (they will fall down next to the tree) by means of the vibration from the flexible prongs to the branches respecting the olives and the tree. It has distinctive features compared to most olive harvesters on market with carbon prongs. Follow its advantages:

Each prong can harvest many olives.
Higher harvesting capacity.
Less vibrations (thanks to the two opposite counterweight motions).

This model differs from all other olive harvesters on market as it is suitable for many different uses: you can use it as a “comb” on pruned and not too thick trees or, if you prefer, you can repeatedly move the tool towards and forwards the branches. This option is intended for the branches for which is impossible to use the machine as a “comb”.

About the prongs

This model stands out for its penetration capacity through the branches. It is possible by means of the long prongs (even 30 cm). This means that they can get very depth into the branches. These features make this olive harvester best suited to work on very thick and/or not pruned trees. It respects the olives and do not damage or break branches. It will be very easy and fast to replace the prongs in case of damages by means of the prongs fixing system with conical hitch and nut.

Width per comb: 21 cm.

No. of prongs: 5+5.

Prongs material: carbon fiber.

About the motor

170 W = motor nominal power; during standard-use conditions.

270 W = motor rated power; during temporary use under load of the machine (very thick foliage when the revolutions of the comb slow down).

The way in which the Operator uses the machine (standard use or under load) determines the motor service life.

The motor unit is equipped with a device that keeps the number of revolutions of the parallel combs constant. In this way the harvesting performances are very high.

It is equipped with a stop system that automatically shuts down the motor, in case of it exceeds its high speed, and restarts the motor few seconds later.

The harvesting head’s power unit is mounted on sealed ball-bearings, which do not require daily maintenance. The sealed ball-bearings with reduced friction guarantee high reliability and energy saving.

The sturdy protection shield is made of ABS and protects the transmission against dust, debris and any stress.

Extension pole and handle

Lightweight extension pole made of aluminium supplied with ergonomic grip.

The ON/OFF switch at the bottom of the pole allows the Operator, once switched on the machine, to handle it effortlessly as needed. This means that is not necessary to hold an hand on the handle to keep the trigger pushed.

Overall pole lengh:

Pole only: 140 cm
1 m additional aluminium extension pole provided on standard kit

Free items & Standard equipment

COMPLIMENTARY: ear protection muffs, goggles, headscarf, gloves + grease spray

COMPLIMENTARY:

Protective earmuffs to work with maximum comfort
The ear protection as to be the one recommended for all working conditions. Indeed, the earmuffs provided on the standard kit are specifically designed to protect the operator against the noise coming from the brush cutter.

Protective goggles that can be used as an alternative to the visor mask.
Protective mask goggles in polycarbonate with CE certificate, equipped with antifog and anti-scratch panoramic screen. The ventilation is ensured thanks to the holes made on the frame to avoid obfuscation and to improve comfort of use.

AgriEuro Headscarf

Cotton gloves with rubber waves, for greater comfort and a secure and stable grip on the equipment

Multipurpose lithium grease spray, 400 ml, to lubricate the internal transmission gears of the olive harvester Universal lithium grease suitable for any type of lubrication both on kinematic devices and on rotating ones.