AgriEuro Premium-Line AGRI 102 Diesel Garden Tiller - Diesel engine 296 cc

AgriEuro Premium-Line AGRI 102 diesel garden tiller:

A top-quality machine, equipped with a heavy diesel engine and a sturdy oil-bath gearbox with three forward and one reverse gear.

Suitable for heavy and difficult work on hard, unploughed ground.

Its heavy weight of 105 kg is definitely a major strength that helps the machine penetrate deep into the ground.

It is renowned as a must-have model for those having large land to till, or soil of a certain hardness or with the presence of small stones (where a lighter rotary tiller or one with a less consistent drive such as a belt drive would not be able to work as effectively).

Thanks to the 296 cc and 7.7 HP diesel engine, the machine is equipped with considerable torque, allowing it to work smoothly even in high gears, thus enabling the cutters to rotate even at very high engine speeds without putting too much strain on the engine itself.

Additionally, it guarantees low fuel consumption, low maintenance and low operating costs.

Features:

Nominal Power: 7 HP
The correct term would be "Commercial” Power, meaning the standard definition used until a few years ago by all well-known engine manufacturers.

* This technical feature is the one indicated in the main sales channels, even if it is higher than the real power of the engine.

Effective power: 5.5 Hp
It corresponds to the real power expressed motor shaft. This is the power indicated as official in the engine instructions manual.

* This technical feature may vary from a an engine model to another according to the speed of rotation provided.

WARNING!

The engine is PROVIDED WITHOUT OIL.
Please carefully read the instruction manual before starting the unit.

The gearbox fitted to this rotary tiller is undoubtedly one of the best 3+1 gearboxes on the market fitted to garden tillers of this category.

Here below the main features:

• Overall size and sturdiness, which are two of the main characteristics of the this garden tiller model.
• Upper gear tempering
• Accuracy gear shifting engagement
• Accuracy in the gear manufacturing

Equipped with 3 forward gears and 1 reverse gear that can be operated by means of the lever in the controls.

The power take-offs are easily accessible, located directly at the rear of the machine. Simply remove the rubber plugs and they are immediately available.

Normalised power take-off
(it rotates at all times, even when the gearbox is in neutral, useful for operating additional equipment that can be connected to the power take-off)

Power take-off synchronised with the gearbox
(it can be used for towing operations. For instance, integrating a trolley with traction wheels behind the rotary tiller, even though it can no longer be approved for road use)

The transmission is among the sturdiest available on the market.

Made with a pinion and crown gear in an oil bath.

Truly large and outstanding robustness, suitable for withstanding even heavy-duty work.

Made entirely with gears in an oil bath, it requires absolutely no maintenance (just check the oil level at long intervals).

WARNING!

Check the gearbox oil level before starting the machine.

Sturdy tiller mounted on an hexagonal-shaped central shaft, and provided with six elements with 4 steel hoes each.

Tiller effecting working width: 95 cm

Hexagonal shaft diameter of the hoes: 27 mm.

The tiller on this diesel rotary tiller is adjustable. You will just need to remove the two outermost elements and reinserting the outer protective discs: the working width is reduced to 65 cm.

It is also possible to purchase the relevant extensions, which allow the tiller to be enlarged even further than the basic configuration of 95 cm, to an exceptional width of
125 cm with the side plant protection discs fitted

Rear spur adjustable in height and can be positioned in rotating or fixed configuration.

In the pictures, it is mounted in the standard position.

For instance, it can be mounted in the reverse position (with the bend turned to the front), to tackle harder or rough terrain.

The handlebars are height and side adjustable thanks to the double regulator made of cast steel.

Controls:

• red upper lever: clutch that operates the machine based on the selected gear
• lower lever on the right, which operates the reverse gear.
• Throttle lever