Yard Force NX60i Robot Lawn Mower - With Lihium-ion Battery

Are you tired to spend the whole weekend mowing your lawn? If you are looking for a completely autonomous cutting device, easily programmable via smartphone, the Yard Force Nx60i Robot Lawn Mower is the perfect tool for your needs.

It is recommended for surfaces approximately up to 600 m² featuring a cutting width of 18 cm.

These robots offer the possibility not to collect grass while mowing using the mulching cutting system. This system lets grass decomposing naturally, and water and nutritional substances returns to soil, reducing its loss of moisture.

The perimeter wire and pegs included allow an easy installation without the need for specific assistance. Once the operator has proceeded delimiting the working perimeter of the defined lawn area, he will just need to start the robot lawn mower to get excellent results, even immediately after the first operations.

The cutting tool is already pre-programmed in order to obtain the best results. However, it is also possible to change the scheduled programme depending on your needs via Wi-Fi, thanks to the Yard Force App or the handy simplified display.

The brushless motor is powered by a 28V 2 Ah battery, which ensures a running time of 60 minutes. Moreover, this robot is equipped with the Ultrasonic Obstacle Detection Technology, which allows the robot to detect and avoid the obstacles in its way.

The cutting height can be easily adjusted from 20 mm to 60 mm through a knob. Finally, the robotic lawn mower can work on maximum 40% slopes, and it returns to the charging station autonomously in case of rain, thanks to the two rain sensors placed on top of the cover.

Major strengths of the robot lawn mower:

• INTUITIVE: Installation, Setting and Operation. Immediate start and ready for use
• SUPER-COMPACT: The most compact robot lawn mower of its category.
• INDEPENDENT: Fully independent. Cuts and charges itself. You don’t have to worry about anything.
• SENSIBLE: Equipped with anti-collision sensors. It detects obstacles higher than 10 cm (walls, fences, garden furniture). When it detects an obstacle it stops, goes back and changes direction. (however, we recommend delimiting the obstacles with the wire). Moreover, the robot stops when lifted.
• SMART: Equipped with Ultrasonic Obstacle Detection. Thanks to its "eyes” it detects the obstacles to avoid, but, in case of roots lower than 10 cm, it will be necessary to exclude the area with the perimeter wire.

AT YOUR FINGERTIPS New App ( that can be downloaded from the App Store of your iPhone or from Google Play of your Android smartphone). Thanks to this App, you will remotely control your robot lawn mower and take advantage of its autonomous functioning.

Manage, communicate and control your lawn mower using the smartphone!

The available operations with the new APP:

• Check the charging status;
• View the robot history: operation, charging time and error list.
• Enable or disable the sensors or the robotic lawn mower;
• Set the ultrasonic obstacle detection and enables/disables this function;
• Share the functions of the robot lawn mower on several devices;
• Setting: it is possible to import data and timing of operation;

If you do not have Wi-Fi network, you can access to the direct mode on the robot control panel.

ULTRASONIC OBSTACLE DETECTION:

The Yard Force robot lawn mower is equipped with Ultrasonic Obstacle Detection. Thanks to this technology, the robot is equipped with special "eyes" which allow it to avoid trees, thus it is also recommended for gardens with many obstacles.

The Yard Force robotic device detects the obstacles to avoid, but, in case of roots lower than 10 cm, it will be necessary to exclude the area with the perimeter wire perimeter.

ANTI-COLLISION SENSORS:

The Yard Force anti-collision sensors detect fixed obstacles higher than 10 cm, like walls, fences, garden furniture, etc. When the robot detects an obstacle, it stops, goes back and changes direction.

However, we suggest to always delimit the obstacles with the boundary wire.

As soon as the product is delivered, you can start it autonomously: even the less expert user, who has never had experience with cutting device, will be immediately able to start the Yard Force Robot lawn mower according to the instructions detailed described in the manual.

Yard Force NX60i can be easily installed with very few simple steps:

1. Assemble and tighten the charging station;
2. Fix the boundary wire with the proper fixing pegs around the working area;
3. Schedule the cutting calendar;

The user needs to install the perimeter wire at the first installation. This installation will delimit the boundaries of the cutting area permanently. The perimeter wire will be no longer visible within a couple of weeks.

The perimeter wire (120 m) along with the (150 pcs) pegs are already included in the package.

This robot lawn mower is ideal for every user. From now on:

• You will be fully aware of the product you've purchased, having a thorough knowledge of its specifications and features.
• You will be able to use your robot lawn mower independently, without the need of constant support from a technician, and ask for assistance even in case of small issues.
• You will save time and money compared to other robot lawn mowers.

Main technical features:

CUTTING SPECIFICATIONS:

• Mulching: 3 steel blades for mulching cutting. This system cuts grass finely, and it does not require collecting grass clippings. Grass decomposes naturally, water and nutritional substances returns to soil for a wonderful, healthy lawn! The mulching system allows distributing grass clippings evenly for a fertilized, healthy lawn.
• Max. cutting area: 600 m²
• Cutting width: 18 cm
• Maximum incline: 40%

Moreover, the robot lawn mower is equipped with two high-traction wheels that allow to keep the robot lawn mower perfectly balanced even in case of higher slopes The two front pivoting wheels allow further balancing the equipment.

Possibility to adjust the cutting height thanks to the handy knob which enables to move the cutting deck from 20 mm to 60 mm.