3 point linkage tractor flail mower
ATTENTION: Sometimes the made in China flail mowers are of unmarked origin on web. We suggest you to check the product’s origin before you purchase.
|With FL tractor flail mower, for free, a standard Cardan shaft for the tractor linkage.|
| Overall width: 124 cm |
Real working width: 112 cm
Weight: 210 kg
Electric demand: 16-40 HP
Working height: 2 / 9 cm
|Side manual movement provided on standard equipment|
The 3 point linkage is sliding on a strong tube on the full flail mower’s width.
|It is possible to adjust it on 3 different positions movement. By means of a 3 holes fixing bar it is possible to set 3 different assets: |
- in line with the tractor’s
- partially on the tractor’s side
- Fully on the tractor’s side
To move the flail mower it is enough to take off and then fasten on another position the fixing bolt show aside
|Particular of the additional sliding reinforcement on the rear side of the third point.|
|Hammer flails: nr. 16|
|Focus on a hammer flail, mounted on extremely strong welded supports|
|Focus on the side support with inner bearing for the rotor fixing |
|Focus on the outer anchor plate of rotor with inner hole for greaser.|
Flail mower for tractors up to 35-40 hp
| Thinly crushes grass and pruning residuals, with simultaneous turf rolling. Thanks to the high number of rotor’s revolutions and the great number of hammers, it reduces the turf waves shape and made an excellent crunching function. Thanks to the sharped edge hammer flails it has an excellent cut, for gardens, lawns and urban green areas. The flail mower must be attached to the rear side of the three point tractor’s linkage. |
Rear support roller assembled on support with bearings and provided with scratch out bar
It is height adjustable
|Focus on the plate with bearings where the support rear roller is assembled to|
|Strong front flaps for stones protection made of high thickness steel|
|Belt protection side shield provided with many ventilation openings (for an optimal cooling down) |
2 belts side transmission
|Side belts easy tensioning system by means of a proper screw. |
It is enough to turn screw few times to draw belts.
Focus on the solid oil bath gear box.
It is provided with a rear additional power take-off with inverse rotation.
* useful for the very old tractors with left power take-off (inverse rotation). It is enough to unscrew the 4 screws, turn 180° the gear box to have the additional power take-off on the front side in replace of the other one. Then fasten the 4 fixing to the box screws. The flail mower will be able to work with left rotation tractors too.
|Standard 1 3/8" z6 power take-off PTO (suitable for each model of recently manufactured tractors): whether you are dealing with older tractors, it is recommended to previously check that they provide the same power take-off type featuring the standard right/clockwise rotation.|