The pump offers a maximum flow rate of 13 liters per minute and a maximum head of 6 meters, ideal for various applications.
Fitted with oil seals for a secure seal, it can prime up to 6 meters in height.
The 3/4" threaded spouts are compatible with many connections, and the pump handles liquids with a maximum density of 1.1 g/cm3 without any hard particles in suspension.
The maximum fluid temperature is 90°C (up to 130°C with special seals on request).
It is not suitable for aggressive liquids, gasoline, solvents, or explosion and fire hazardous environments.
The pump allows the pumping flow to be reversed and includes brass hose barbs for 20 mm piping (one straight and one 90° curved).
During installation, the pump must be filled with liquid; after that, this operation will no longer be required.
It also works with closed pipes for short periods, offering versatility.
Material:
- Pump body Brass
- Counter flange: AISI 304
- Shaft: AISI 316
- Impeller: Brass
- Gaskets NBR
Engine:
- Powered by a 230V 50Hz single phase asynchronous motor
- Equipped with MEC 63 1400 rpm engine with 0.2 HP/0.1 KW
- IP X4 rated
- Insulation class F:
- Power connection via cable with 1m Schuko plug
- Switching on and reversing the pumping flow via switch inverter