The pump offers a maximum flow rate of 28 litres per minute and a maximum head of 22 metres, ideal for a variety of applications.
Equipped with an oil seal for a secure seal, it can prime up to a height of 6 metres.
The 3/4" threaded ports are compatible with many connections, and the pump handles liquids with a maximum density of 1.1 g/cm³ without hard particles in suspension.
The maximum liquid temperature is 90°C (up to 130°C with special seals on request).
It is not suitable for aggressive liquids, petrol, solvents, or environments at risk of explosion and fire.
The pump allows the pumping flow to be reversed and includes brass hose connectors for 20 mm pipes (one straight and one 90° curved).
During installation, the pump must be filled with liquid; this operation will not be required again afterwards.
It also works with closed pipes for short periods, offering versatility.
Material
- Pump body: Brass
- Counterflange: AISI 304
- Shaft: AISI 316
- Impeller: Brass
- Seals: NBR
MOTOR
- Powered by a single-phase 230V 50Hz asynchronous motor
- Equipped with MEC 63 motor at 2800 rpm, 0.5 HP/0.4 kW
- Protective rating IP X4
- Insulation class F
- Power connection via cable with 1m Schuko plug
- Start-up and reversal of the pumping flow via switch inverter