This pump offers a maximum flow rate of 80 litres per minute and a maximum head of 40 meters, making it ideal for multiple liquid transfer applications. The shaft seal is guaranteed by a mechanical seal, which ensures reliability and long service life. With a maximum priming height of 6 metres, the pump can also be installed in situations with considerable height differences.

The 1'' threaded spouts allow easy connection to pipes. This pump is designed to handle liquids with a maximum density of 1.1 g/cm3, as long as they do not contain any hard particles in suspension, such as sand. The maximum operating temperature is 90°C, but special seals can be required to allow operation up to 130°C.

It is important to remember that this pump is not suitable for aggressive liquids that could damage the building materials or seals, as specified in the technical specifications. Furthermore, it is not suitable for the transfer of petrol, solvents or for use in environments with explosion and fire hazards.

A remarkable feature is the possibility of reversing the pumping flow, offering greater flexibility in installation and use. The pump is designed to operate with the impeller locked to the shaft and can operate for short periods with the pipes closed, ensuring safety in case of emergency.

During installation, it is necessary to initially fill the pump with liquid; afterwards, this operation will no longer be necessary, simplifying maintenance and daily use of the pump.

Material