Stiga G 300 - Robot Lawn Mower - with 2 Ah ePower Battery

The ideal robot lawn mower for those with limited space and little time to maintain their lawn. G 300 is the new robot from Stiga that will ensure excellent turf maintenance.

The machine cuts the grass, chops it up finely, and drops it back onto the ground, turning it into a nutrient for the soil. To ensure an optimal result, two cutting sessions per day, suitably spaced out in time, are recommended to let the grass recover and always look impeccable and healthy.

It features a 2 Ah E-Power battery for quick and easy charging. After a 40-minute recharge, the robot is ready for an hour of mowing. Charging base included.

Practical and easy cleaning and maintenance, thanks to the removable and washable cover.

The G 300 is easily programmable via the STIGA-GO App, which besides the initial configuration allows you to schedule mowing sessions remotely whenever you want.

Equipped with lift sensor, rain sensor, obstacle detection and anti-tipping sensors, for complete autonomy during mowing sessions.

Performance is guaranteed, thanks to the four pivoting blades reaching 2850 rpm with adjustable cutting height from 20 to 60 mm.

Recommended for a maximum area of 300 s.q.m., it remains quiet and efficient, and will be able to mow grass even on slopes of 45%.

This robot mower is covered by the STIGA 5-year warranty, valid if purchased by December 2024.

The App can be used on both Apple and Android devices, for comprehensive management of your robot!

The App allows you to easily schedule cutting sessions, switch to ECO mode and manage cutting parameters.

With the App you will always be connected to a service point for a quick response in case of need or failure.

- The App is easily downloaded through the QR code on the robot.

It is possible to contact customer service via the STIGA.GO App.

• High-performance blades: powerful and effective. Four central blades guarantee a fast, quality cut.
• Simple operation: Thanks to the simple control panel, programming the robot is easy and intuitive.
• Environmentally friendly and low-noise: it does not pollute thanks to the electric charging system and is extremely quiet at under 60 dB(A).
• Helps with soil nutrition: It shreds the grass and lets the residue fall to the ground, adding further nutrients to the lawn.
• Safe: When raised, the robot stops the blades, for safe use at all times.
• It is autonomous: works and recharges autonomously. When the battery is about to run out, the robot automatically returns to its station for recharging.
• Powerful: The G 300 can tackle slopes of up to 45% - 24°.
• Easily removable shell for better cleaning and maintenance.

An intuitive control panel lets you manually give instructions to the robot when you don't have your phone at hand. With the switches on the panel you can:

• Switching the G 300 on and off
• Activate Bluetooth functionality
• Instruct the robot to return to the charging base
• Manage the robot to cut according to the set schedule
• Direct the robot to start cutting immediately

The robot will stop immediately by pressing the big red button marked STOP.

- Detail of the STOP button

- Detail of the control panel

The product you receive is easy to start up, and even the most inexperienced user can begin to operate the G 300 by following the included instruction manual.

As soon as the charging station (equipped with charger) is installed, and the working perimeter is delimited (all that is needed is to bury the supplied wire), the robot is ready to go.

This machine from Stiga's ESSENTIAL line therefore ensures minimal installation and maintenance costs, as well as simple and basic operation.

- Detail of the connectors on the charging base

Main technical features:

• Engine type: Brushless
• Charging system: Automatic
• Power Kit: Included
• Battery voltage: 25.2 V
• Battery: Lithium-ion
• Battery capacity: 2 Ah
• Running time: 60 minutes
• Charging Time: 40 minutes
• Noise level: 60 dB
• Weight: 7.5 Kg

All controls are located on the control panel.

- Other features:

• Quick stop control: The robot stops when the large STOP button is pressed, ensuring safety in all circumstances.
• Obstacle detection sensor
• Lifting sensor: if the robot is lifted, it will switch off and then must be started manually.
• Stiga Soft Lawn Touch: the machine is so light that it leaves no trace on the lawn, and the central battery improves balance and ensures easy cutting.

The robot has a manual cutting height adjustment, which can vary from a minimum of 20 to a maximum of 60 mm.

To adjust the height, press the stop button to open the cover and access the control panel, disengage the safety key, adjust the height to your liking and then reinsert the key.

Mulching: 4 pivoting steel blades finely chop the grass, leaving it on the ground. As it decomposes, it becomes a nutrient for the lawn itself, creating an entirely natural cycle. With this cutting method, the grass does not need to be harvested.

This system of pivoting blades guarantees exceptional durability and, more generally, greater protection of the entire machine, as they are better able to withstand impacts from foreign bodies.

Maximum recommended cutting area: 300 s.q.m.

Cutting width: 18 cm.

The G 300 will operate up to a 45% slope, or 20% near the edges.

Two large rubberised wheels are included as well, for an effective and long-lasting grip on the ground, and two small front swivel wheels, which allow it to overcome slopes and obstacles.

Edge cutting can be programmed via the App. It can be set on the days on which cutting sessions are scheduled.

- Detail of the rear wheels

- Detail of the front wheels

- Difference between pivoting and non-pivoting blades

The core of G 300 robot is the Stiga-patented ePower battery.

This battery consists of first-class lithium-ion cells, containing a chemistry designed to increase reliability and durability.

Tested in all kinds of conditions, the battery still performs at its best even after 600 recharges, comparable to two recharges per week, over a period of six years.