PROMO EGO ST1530 Battery-powered Brush Cutter - 56 V - 4Ah Battery

With a cutting width of 38cm, this tool is ideal for professionals as it can also be used with the reciprocator attachment (purchasable separately), for more versatility.

EGO ST1530 features a quick-adjust loop handle, which allows you to configure the tool according to your working needs, with optimum balance and control, also thanks to the shoulder strap included.

Equipped with a 2.4 mm line with counter-clockwise rotation cut. To replace the line, you need to enter the new line through the slots in the line head, align the ends, hold the head and turn until only a small piece of line protrudes.

A shoulder harness is included in the packaging, for even greater comfort, especially during long work sessions. The strap, combined with the adjustable handle, allows you to work as comfortably as possible.

Two-speed adjustments to cut according to your needs.

Equipped with battery charger and 56V/4Ah battery.

It is a battery-powered brush cutter, silent, lightweight and easy to use, it only weighs 4.4 Kg without battery.

This cutting tool ensures the following advantages:

• No power cables needed
• Zero emissions
• Extremely reduced noise level
• Great manoeuvrability and comfort

The machine is equipped with:

* The batteries can be used

• In series
• The voltages (V) are summed up
• The capacity (Ah) IS NOT summed up
• In parallel
• The voltages (V) ARE NOT summed up
• The capacity (Ah) is summed up

Fastest charging time of the category.

- 56 V 2.5Ah Battery: 30 minutes charging time from 0 to full charge
- 56V 5.0Ah Battery: 40 minutes charging time from 0 to full charge
- 56 V 7.5Ah Battery: 60 minutes charging time from 0 to full charge
- 56 V 10.0Ah Battery: 70 minutes charging time from 0 to full charge

- Ventilated cooling system: prevents the battery and charger from overheating
- Built-in charge indicator: allows you to check the battery's charge status
- LED charge indicator lights: informs you of the battery's charge status
- It allows charging of all the ego power batteries.

Advantages of the electric motor:

• More reliable than a petrol model. No spark plug, filters, oil dipstick, carburettors, etc. or components which can cause problems.
• Zero maintenance
• Much lighter
• Lower consumption and drastically reduced operating costs compared to petrol engines (great results with minimal power required). Moreover, the Operator won’t have to refuel (the fuel should always be fresh).
• Zero vibrations, thanks to the electric motor. Instead, almost all engine-powered machines, which are not equipped with an anti-vibration system on steel springs, have a very high degree of vibrations, making the work quite unpleasant.
• Zero smoke emission, zero impact on the environment and, above all, on the Operator’s health.
• Much more silent and therefore pleasant to use than a petrol engine.

6000-7000 rpm speed

LONGER LIFE: up to 3 times higher than nickel–cadmium batteries, reducing the need to recharge during long periods of use.
Ideal for medium-large gardens.

FULL CHARGE FOR THE ENTIRE BATTERY LIFE: the charge of the lithium-ion batteries does not fade. Unlike nickel-cadmium batteries, which power gradually decreases, lithium-ion batteries’ cells maintain constant power throughout the entire cycle. The same charge for the entire cycle without reducing the motor speed. The battery is running at full power until its complete exhaustion.

LONGER CHARGE LIFE: lithium-Ion batteries last 3-4 times longer than traditional Nickel-Cadmium batteries and their power storage lasts longer so they lose less power. Lithium-ion batteries can be recharged up to 2000 times!

LIGHTWEIGHT: lithium-ion batteries have the best power-weight rate. They weigh 1/3 of nickel-cadmium ones.

ENVIRONMENTALLY-FRIENDLY: lithium-ion battery-powered tools are recyclable and are produced without heavy metals.

NO MEMORY EFFECT: lithium-ion batteries can be recharged at any time without negative memory effect. Indeed, they don't fail to provide maximum power even after hundreds of charge cycles.
Few minutes of charge are enough to complete the work.

LOW DISCHARGE RATE: low discharge rate (up to 5 times lower than nickel-cadmium batteries) so your machine will be ready to use even after months of storage.

BATTERY CHARGER: lithium-ion batteries chargers reduce energy consumption by an average of 35%.

The heavy-duty head is equipped with the Tap ‘n go technology for fast line replacement and working without interruptions.

The adjustment of the line length is automatic thanks to the counter-blade in the stone guard.

Machine equipped with adjustable speed, to provide greater control on the ground.

Cutting width 38 cm:

Line diameter: 2.4 mm

The aluminium shaft of the brush cutter has an adjustable loop handle that allows you to change the position and balance of the tools and, in addition, a shoulder harness which offers additional comfort and control.

The machine weighs 4.4kg WITHOUT battery

The controls are simple and intuitive, with starter trigger and safety sensor.

Focus on the double speed available