Makita DDG460 battery-operated post hole borer with 36V engine
Designed to make holes in the ground, bore fence posts and planting shrubs; ideal for all frequent, small jobs.
Particularly suitable for beginners and also for those who want an alternative to the classic internal combustion engines.
The machine has 2 speeds and features reverse motor rotation to easily extract the auger tip from the ground even when it gets stuck.
Auger bit not included
BATTERY AND CHARGER NOT INCLUDED
LONGER LIFE: up to 3 times higher than the nickel–cadmium batteries, reducing the need to recharge during long periods of use.
Ideal for medium-large gardens.
FULL CHARGE FOR THE ENTIRE BATTERY LIFE: the charge of the lithium-ion batteries does not fade. Unlike nickel-cadmium batteries, which power gradually decreases, lithium-ion batteries’ cells maintain constant power throughout the entire cycle. The same charge for the entire cycle without reducing the motor speed. The battery is running at full
power until its complete exhaustion.
CHARGE DURATION LENGTHNESS: Lithium-ion batteries hold their power for a longer time than the nickel-cadmium ones, with a number of charges 3-4 times greater
and longer storage times with lower battery’s loss. Lithium-ion batteries are rechargeable up to 2000 times!
LIGHTWEIGHT: Lithium-ion batteries have the best power-weight rate. They weight 1/3 of the nickel-cadmium ones.
ENVIRONMENTALLY FRIENDLY: Lithium-ion battery-powered tools are recyclable and are produced without heavy metals.
NO MEMORY EFFECT: Lithium-ion batteries can be recharged at any time without negative memory effect. Indeed, they don't fail to provide maximum power even after hundreds of charge cycles.
Few minutes of charge are enough to complete the work.
LOW DISCHARGE RATE: low run down rate (up to 5 times lower than nickel-cadmium batteries) so your lawn mower will be ready to use even after months of storage.
BATTERY CHARGER: the lithium batteries chargers allow to reduce the energy consumption by an average of 35%. Professional long-lasting air filter
BATTERIES AND CHARGER NOT INCLUDED
Main advantages of the electric motor:
Easy and user-friendly controls that are all located on the handlebar.
Below the machine there is a chuck key for the assembly and disassembly of the auger bits (not included), a LED light that allows you to operate even in low light conditions and a speed switch with 2 speed options.
Low: 350 rpm (recommended for most tasks)
High: 1400 rpm
The side handle can be fixed on both sides and with various adjustments thanks to the numerous screw holes.
Detail of the chuck.
BATTERIES AND CHARGER NOT INCLUDED
The post hole borer is shipped in its original packaging. The assembly requires a few minutes
Included in the packaging there is the instruction manual and the adapters for the auger bits (NOT INCLUDED).
BATTERIES AND CHARGER NOT INCLUDED.
Se vuoi cambiare lingua al sito clicca sulle sigle di seguito:
