Spare Parts + After-Sales Assistance
5% off
from the 2nd item
Prompt Delivery +
Free Shipment

GreenBay GB-WDC 120 BSE Professional Petrol Garden Shredder with B&S XR2100 13.5 HP Engine

GreenBay GB-WDC 120 BSE Professional Petrol Garden Shredder with  B&S XR2100  13.5 HP Engine
Safe shipment: box secured to wooden pallet
Motor type
4 stroke
Motor brand
Engine Model
Cubic Capacity
420 cm³
Rated output
13.5 HP
Blade quantity
Max branch cutting diameter
120 mm
Wood Chip size
3 - 4 cm
N° of hoppers
Upper discharge system
Electric start
Transmission type
Discharge chute rotation
Manual with lever on the chute
Gift: 2 bottles of 1 L oil each
Gift: 2 bottles of 1 L oil each
€ 1.683,46
VAT Included
Out of stock
Notify me when available
Free Shipping
ID: K602536

EAN: 8054141542792

GreenBay GB-WDC 120 BSE Garden Shredder

The GreenBay GB-WDC 120 BSE petrol garden shredder allows to reduce the weeds and twigs to an easy to handle and suitable size for composting. The tiny wood chips crushing also reduces the time required for the decomposition of the latter.

The machine is able to even process very bulky branches and leaves, without a pre-shredding. Thus, it also has a large capacity that allows entering large volumes of material at a time.

Cutting diameter: 120 mm

This garden shredder is not approved for the road trip.

This shredder is equipped with a safety system which stops the machine in case of activation.

Thanks to the wheels and handles placed at the ends of the hopper, the displacement of the machine is simple and able to reduce the strain during the manual movement of the machine.

This petrol shredder is built following the logic of the large wood chipper, thus obtaining the best results in terms of cut, speed and reliability; it complies with CE regulations on safety at work.

It mounts a Briggs & Stratton XR2100 (13.5HP)motor, which is a powerful and reliable engine at the same time.

Warning: Like all wood chippers and garden shredders, it is not suited for the shredding grass, leaves, pine needles, etc. (It is made to shred branches, but it can grind the leaves, needles and certain other vegetation may be attached to them)

Main user requirements for all the shredders on the market:
- The shredder must grind recently cut branches from the tree, not dried (they would limit the shredding capacity and lead to a rapid deterioration of the blade);
- The branches must be preferably long-limbed, smooth and not lumpy (otherwise the cutting diameter is reduced);
- The diameter of said cut is the maximum, so it is advised not to try and shred larger branches. In that case it would be preferable to evaluate the purchase of a shredder with a larger cutting diameter;
- The cutting diameter can vary according to the amounts of the wood (e.g: oak, olive, plum and peach are hardwoods and can reduce the cutting ability of the wood chipper)

Briggs&Stratton Engine 420 cc with Electric Start

The Shredder has a powerful Briggs & Stratton XR2100 4-stroke air-cooled 420 cc engine, with overhead valves and aluminum cylinder.


Engine Type
Cylinder type:
Engine cool-down
Air cooled
Cubic Capacity:
420 cm³
Recoil starter
Tank capacity:
6.6 L

The engine of this shredder is also equipped with an electric starter. This machine is equipped with battery.

Focus on the ignition key

Rated Power: 13.5 HP
The correct term would be "Commercial” Power, meaning the classic standard of definition of power officially used until a few years ago by all leading engine manufacturers.

* This figure is even more widespread and advertised in the leading commercial channels, although it is a matter that it is higher than the actual power.

Effective power: 10.3 Hp
It corresponds to the real power expressed motor shaft. This is the power indicated as official in the manual or in the technical data of the motor’s manufacturer.

* This technical data may vary for the same engine model depending on the rotational speed supplied by the engine applied to the equipment.


Make sure to carefully read the instructions manual before starting the unit.

The engine is started electrically by key.

CAUTION: using the machine at maximum rpm, in addition to not obtaining an efficient grinding of the branches and not being able to grind larger diameters, it may involve a whole series of anomalies:
- lowering speed or stopping the motor during its use;
- rapid deterioration of the transmission belts between the motor and the rotor;
- damage to the centrifugal clutch which, if the motor is not at full speed, you do not get the full expansion of the same by determining the consumption of up to burn and need to be replaced;

Belt Transmission

This is the only machine of its category with intermediate double belt drive transmission.

This feature gives high sturdiness to the unit, protecting both the engine and all the shredding system from every possible internal hit or kickback.

Higher durability over time compared to the standard system of all the manufacturers of petrol-powered machineries, the transmission is directly connected to the shredding cutting system.

Unified Hopper

UNIFIED: considerably simplifies and speeds up the work.

The hopper is fully examinable thanks to the possibility of opening.

The single hopper considerably simplifies and speeds up the work. It eliminates the operation of separating (before grinding) the material between the major and woody sections and smaller and green sections, each of which is inserted in its special hopper (operation instead requested from all the classic wood chipper equipped with 2 hoppers)

SAFETY DEVICE : it is possible to use the device placed around the hopper . In case of emergency it is possible to make a slight pressure with the hand on the device to immediately block the functioning of the shredder.

The shredder is examinable.

Central rotor and Shredding chamber

The cutting system consists of:

  • 2 large cutting blades, which are mounted on a swiveling steel plate located at the end of the hopper.

The blades carry out a sectioning of the material present in the hopper into shredded fragments of approx. 3-4 cm.

Provided with large and sturdy shredding chamber. It features a rounded shape that ensures great productivity and long durability of the cutting system.

360° Rotating Chute

Provided with 360° rotating discharge chute 2m tall.

Some examples:

  • Position 1
  • Position 2
  • Position 3

You’ll just need to simply press the lever and rotate it in the desired position.

The discharge inclination is adjustable via a two hooks placed to end of the chute

Some examples to control the distance of the discharged shredded material:

  • Position 1
  • Position 2
  • Position 3

Main Features

Adjustable discharge mouth located at 1.5 m from the ground, equipped with deflector with adjustable tilt.

It allows you to download the vegetable waste in a crate.

In addition to the inclination of the deflector the discharge mouth is orientable: It is rotating and with the simple use of the lever, it can be oriented either to the right or to the left with various angles.

In the rear part of the hopper there is a comfortablecompartment to always have at hand the instruction manual

In the front part there is a third pivoting wheel.

The wood chipper also has large pneumatic wheel 16x8.00-7 that allow easy transport.

It features a comfortable and practical tow hitch.

The car is not approved for road transport.

Product Features
Spark ignition
Automatic roller:
Anti-jam system:
Discharge chute:
high - rotary
N° of hoppers :
Hopper opening dimensions (height):
50 cm
Hopper opening dimensions (width):
45 cm
Interchangeable sieves:
Electric start:
Manufacturing Country:
Motor data
Motor/Engine brand:
Briggs & Stratton
Engine Model:
Motor type:
4 stroke
Cubic Capacity:
420 cm³
Number of pistons:
Rated output:
13.5 HP
Real power:
10.3 HP
Power supply:
Overhead valve
Engine lubrication type:
Oil bath
Pressure reducing system:
Manufacturing Country:
Transmission data
Transmission type:
Cutting data
Housing material:
Enamelled steel
Max branch cutting diameter:
120 mm
Cutting Rotor Type:
Blade quantity:
Blade movement:
Wood Chip size:
3 - 4 cm
Electric start battery:
Discharge chute rotation:
Manual with lever on the chute
Electric key start:
Recoil Starter (cord):
Front Handle:
Rear wheels size:
4.80 - 8
Pushing Accessory:
Start safety sensor:
Free gifts/extra features
Free engine oil bottles :
Spark plug wrench:
Instructions manual:
Dimensions and logistics
Product dimensions cm (LxWxH):
244x101x182 cm
Net weight:
242 Kg
On pallet
Packaging dimensions cm (LxWxH):
105x76x128 cm
Gross weight (packaging incuded) :
270 Kg
Assembly time:
over 90 minutes

Free Items Included

For Free

2 bottles of 10W40 oil, specific for 4-stroke engines

Free Items and Standard Equipment

The wood chipper is shipped in its original of wood box on a pallet

Conveniently supplied GreenBay bag with inside headphones and glasses As well as operating and maintenance instructions manual