GeoTech S46-150 BMSG Self-propelled Petrol Lawn Mower - 4 in 1 - 46 cm Blade

The GeoTech S46-150 BMSG heavy-duty petrol lawn mower is a machine designed for the most demanding hobbyists who are looking for a good quality/price ratio equipment.

The enamelled steel housing gives this lawn mower high sturdiness and impact resistance.

Equipped with a producer-manufactured 150 cc Ducar DV150 engine featuring 5 Hp of nominal power.

Equipped with a 46 cm blade and centralised cutting height, the machine can be adjusted in 8 different positions from 25 to 75 mm.

The ABS wheels mounted on ball bearings are designed to make the lawn mower as easy to manoeuvre as possible.

Cutting Systems:

• Grass collection system
• Mulching (with proper specific blade)
• Rear discharge
• Side discharge

This lawn mower is suitable for surfaces up to 1000 s.q. m. and provided with a large 50 L grass collector.

The producer-manufactured engine guarantees high performances and it is suitable for works that require high reliability and durability, thanks to its remarkable 150 cc.

Features:

The 625E series engine is designed for ensuring reliability and high performance and it is renowned to be ideal engine for this type of agricultural machineries.

Nominal power: 5.0 Hp
The correct term would be "Commercial” Power, meaning the standard definition used until a few years ago by all well-known engine manufacturers.

* This technical feature is the one indicated in the main sales channels, even if it is higher than the real power of the engine.

Rated power: 3.4 Hp (at 2800 rpm)
It refers to the real power of the engine. This is the power indicated as official in the manual or in the technical data of the engine manufacturer.

* This technical feature may vary from a an engine model to another according to the rotation speed provided by the manufacturer.

Extremely sturdy, reinforced enamelled steel housing for a long service life.

Quick washing joint, which allows cleaning the housing quickly.

Abs front bumper that further protects the already sturdy housing.

Focus on the 46 cm steel blade: Heavy-duty blade equipped with special extended wings at both ends that creates a much more powerful air flow than standard blades. This increases the grass collection, mulching and other cutting systems results.

Rear-wheel drive (Self-propelled).

Equipped with a sturdy belt drive with gearbox.

It allows the Operator to mow the grass effortlessly, optimising the machine traction and forward efficiency.

Rear wheels diameter: 178 mm

Front wheels diameter: 202 mm

Focus on the abs wheels

Focus on the intermediate drive belt (engine/drive) perfectly closed and protected by the proper black cover.

The lawn mower is equipped with 5 cutting height adjustments, from 25 mm to 75 mm.

The centralised cutting height adjustment is incredibly fast and intuitive.

Simply operate the proper lever to lift the machine.

GRASS COLLECTION SYSTEM:

The lawn mower is equipped with a 50 L hybrid grass collector, very easy to remove and empty.

The lower part is made of plastic, which gives strength and sturdiness, avoiding the canvas to tear if in contact with the lawn.

Convenient handle placed on the upper part of the grass collector to make it easy to remove and empty when full.

Grass collector full level indicator: the red switch rises when the grass collector is full.

REAR DISCHARGE SYSTEM:

This system allows mowing grass without using the grass collector, discharging the grass clippings directly from the back of the lawn mower.

Simply remove the grass collector and the rear discharge will automatically operate.

MULCHING CUTTING SYSTEM:

This system allows cutting grass without catching it inside the collector, and crushing the clippings into a fine powder before dropping them on the lawn.

How to convert the lawn mower for the mulching cutting system:

• Remove the grass collector
• Enter the mulching plug supplied
• Lower the rear deflector to operate the mulching cutting system.

MAIN SPECIFICATIONS OF THE MULCHING CUTTING SYSTEM:
This grass mowing system allows crushing grass clippings and dropping them on the ground. The resulting grass particles are so small, they will be barely noticeable on the lawn. This eliminates the problem of its disposal (reducing any effort and shortening the time-saving). Moreover, grass clippings will break down into nutrients and water for the lawn (grass is 80% water) and will thus ensure a perfectly balanced biological cycle. However, it is worth remembering that, to ensure the greatest mulching results, the lawn should be irrigated and the grass needs cutting at least once a week.

SIDE DISCHARGE SYSTEM:

This system allows mowing grass without collecting the clippings inside the grass collector (it is also possible to collect grass a bit higher than normal, due to the high disposal capacity of the side discharge deflector).

Leaving the mulching plug entered, in order not to occlude the rear discharge of the grass, simply lift the black cover on the housing side and enter the side deflector supplied with a simple gesture.

Heavy-duty ergonomic aluminium handlebar with soft grip.

Coated handlebar for great user comfort.

Easy and user-friendly controls placed on the handlebar.

Blade engagement lever (in front of the handlebar)

Adjustments available:

Cutting height adjustment lever.

Handlebar tilt adjustment:

The lawn mower is designed and intended exclusively for cutting grass in garden areas (and not on other types of terrain). The surface must be level, free from irregularities, stones, or other solid objects, and covered with maintained lawn grass (therefore, not uncultivated or spontaneous vegetation). Grass should be cut regularly and must not be allowed to grow beyond 25–30 cm, as most lawn mowers are no longer capable of cutting at this height. Slopes exceeding 15% (equivalent to 9°) must be avoided, except when using 4x4 models.

For heavier-duty tasks involving spontaneous vegetation, grass taller than the above-mentioned limits, or rougher surfaces than a garden, please consider alternative product categories such as Petrol Flail Mowers or Brush Cutters.

Furthermore, grass must only be cut when both the lawn and the underlying soil are completely dry. Mowing should be carried out exclusively in dry weather, well away from periods of rain or irrigation, and preferably in the afternoon, when the grass is no longer affected by morning humidity. Wet grass tends to bend under the blades, which reduces cutting efficiency, increases the risk of clogging inside the deck, and subjects the engine to excessive strain.